EN 45545-2-2013 en Railway applications - Fire protection on railway vehicles - Part 2 Requirements for fire behaviour of materials and components (Incorporates Amendment A1 2015)《.pdf

《EN 45545-2-2013 en Railway applications - Fire protection on railway vehicles - Part 2 Requirements for fire behaviour of materials and components (Incorporates Amendment A1 2015)《.pdf》由会员分享，可在线阅读，更多相关《EN 45545-2-2013 en Railway applications - Fire protection on railway vehicles - Part 2 Requirements for fire behaviour of materials and components (Incorporates Amendment A1 2015)《.pdf（78页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 45545-2:2013+A1:2015Railway applications Fire protection on railway vehiclesPart 2: Requirements for fire behaviour of materials and componentsBS EN 45545-2:2013BS EN 45545-2:2013+A1:2015Incorporating corrigendum November 2015BS EN 45545-2:2013+A1:2015 BRITISH STANDARD

2、National forewordThis British Standard is the UK implementation of EN 45545-2:2013+A1:2015. It supersedes BS EN 45545-2:2013 which is withdrawn. Together with BS EN 45545-1:2013, BS EN 45545-3:2013, BS EN 45545-4:2013, BS EN 45545-5:2013+A1:2015, BS EN 45545-6:2013 and BS EN 45545-7:2013, it superse

3、des BS 6853:1999, which will be withdrawn on 31 March 2016.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .BSI,

4、as a member of CEN, is obliged to publish EN 45545-2 as a British Standard. However, attention is drawn to the fact that during the development of this European Standard, the UK committee voted against its approval as a European Standard.The principal technical concern is that, in the opinion of the

5、 UK committee, the test method for complete passenger seats, set out in Annex B, does not provide a level of discrimination commonly employed in UK practice, in accordance with existing national standards. Seats which would fail the existing UK standard might pass the test and satisfy criteria in EN

6、 45545-2.The UK committee advises users to be aware of this concern when applying this standard.The UK committees full response can be obtained from BSI.The UK participation in its preparation was entrusted to Technical Committee FSH/19, Fire Precautions in Railway Transport.A list of organizations

7、represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 97

8、8 0 580 92561 0ICS 45.060.01; 13.220.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2013.Amendments/corrigenda issued since publicationDate Text affec

9、ted30 November 2015 Implementation of CEN amendment A1:201530 November 2015 Supersession information updated in national forewordEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN 45545-2:2013+A1 October 2015 ICS 45.060.01; 13.220.20 Supersedes EN 45545-2:2013English Version Railway applications -

10、Fire protection on railway vehicles -Part 2: Requirements for fire behaviour of materials and components Applications ferroviaires - Protection contre les incendies dans les vhicules ferroviaires - Partie 2: Exigences du comportement au feu des matriaux et des composants Bahnanwendungen - Brandschut

11、z in Schienenfahrzeugen - Teil 2: Anforderungen an das Brandverhalten von Materialien und Komponenten This European Standard was approved by CEN on 7 December 2012 and includes Amendment 1 approved by CEN on 14 August 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations wh

12、ich stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This E

13、uropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members

14、 are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

15、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form a

16、nd by any means reserved worldwide for CEN national Members. Ref. No. EN 45545-2:2013+A1:2015 EEN 45545-2:2013+A1:2015 (E) 2 Contents Page European foreword . 5 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms and definitions . 9 4 Requirements . 9 4.1 Essential fire safety objectives . 9 4

17、.2 General 9 4.3 Grouping rules . 11 4.3.1 General . 11 4.3.2 Rule 1 11 4.3.3 Rule 2 11 4.3.4 Rule 3 11 4.4 Listed products . 13 4.5 Non-listed products . 19 4.6 Refurbishment and maintenance requirements 20 4.6.1 General . 20 4.6.2 Requirements for refurbishment of passenger seats . 20 4.7 Products

18、 to be approved on functional necessity 21 4.8 Set of material requirements . 21 5 Test properties 29 5.1 Summary of test methods 29 5.2 Modifications on test methods used in 5.1 34 5.2.1 Definitions 34 5.2.2 Furnishing products burning behaviour . 34 5.3 Testing rules 35 5.3.1 Products or assemblie

19、s 35 5.3.2 Hoses or Pipes . 35 5.3.3 Substrates for surface products 36 5.3.4 Test specimen preparation for upholstery products 36 5.3.5 Linear cable containment products. 36 5.3.6 Fire integrity testing . 37 5.3.7 Assessment for burning droplets / particles . 38 6 Evaluation of conformity . 38 Anne

20、x A (normative) Standard vandalism test for seat coverings 39 A.1 Introduction . 39 A.2 Apparatus 39 A.3 Preparation of test specimen . 40 A.4 Test procedure 40 A.4.1 Number of tests . 40 A.4.2 Setting up the apparatus 40 A.4.3 Preparing and fitting of the test specimen 40 A.4.4 Penetration and lace

21、ration tests 40 BS EN 45545-2:2013+A1:2015EN 45545-2:2013+A1:2015 (E) 2 Contents Page European foreword . 5 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms and definitions . 9 4 Requirements . 9 4.1 Essential fire safety objectives . 9 4.2 General 9 4.3 Grouping rules . 11 4.3.1 General .

22、11 4.3.2 Rule 1 11 4.3.3 Rule 2 11 4.3.4 Rule 3 11 4.4 Listed products . 13 4.5 Non-listed products . 19 4.6 Refurbishment and maintenance requirements 20 4.6.1 General . 20 4.6.2 Requirements for refurbishment of passenger seats . 20 4.7 Products to be approved on functional necessity 21 4.8 Set of

23、 material requirements . 21 5 Test properties 29 5.1 Summary of test methods 29 5.2 Modifications on test methods used in 5.1 34 5.2.1 Definitions 34 5.2.2 Furnishing products burning behaviour . 34 5.3 Testing rules 35 5.3.1 Products or assemblies 35 5.3.2 Hoses or Pipes . 35 5.3.3 Substrates for s

24、urface products 36 5.3.4 Test specimen preparation for upholstery products 36 5.3.5 Linear cable containment products. 36 5.3.6 Fire integrity testing . 37 5.3.7 Assessment for burning droplets / particles . 38 6 Evaluation of conformity . 38 Annex A (normative) Standard vandalism test for seat cove

25、rings 39 A.1 Introduction . 39 A.2 Apparatus 39 A.3 Preparation of test specimen . 40 A.4 Test procedure 40 A.4.1 Number of tests . 40 A.4.2 Setting up the apparatus 40 A.4.3 Preparing and fitting of the test specimen 40 A.4.4 Penetration and laceration tests 40 BS EN 45545-2:2013+A1:2015EN 45545-2:

26、2013+A1:2015 (E) 3 A.5 Results 40 A.6 Test report 41 Annex B (normative) Fire test method for seating 42 B.1 General . 42 B.2 Safety warning . 42 B.3 Test facility 42 B.3.1 Hood and smoke exhaust system 42 B.3.2 Ignition source “EN 45545 square burner” . 44 B.3.3 Other general equipment 48 B.4 Test

27、specimens 49 B.4.1 General . 49 B.4.2 Number of tests . 49 B.4.3 Preparation of the test specimen 49 B.4.4 Conditioning of test specimen 50 B.5 Test procedure and application of the burner . 50 B.6 Early termination of test 52 B.7 Test results 52 B.8 Test report 52 Annex C (normative) Testing method

28、s for determination of toxic gases from railway products . 54 C.1 Introduction . 54 C.2 Method 1 Test apparatus 56 C.2.1 General . 56 C.2.2 Calibration of the radiating cone 56 C.2.3 Smoke chamber Smoke density . 56 C.3 Analysis of fire effluents for Method 1 56 C.3.1 Principles of FTIR gas analysis

29、 used in a discontinuous way . 56 C.3.2 Probe for sampling of effluents . 57 C.3.3 FTIR gas cell 57 C.3.4 FTIR spectrometer 57 C.4 Test environment . 58 C.5 Conditioning . 58 C.6 Pre-test conditions for the apparatus for Method 1 58 C.7 Warnings 58 C.8 Smoke and gas testing using Method 1 . 59 C.8.1

30、 Beginning of the test 59 C.8.2 Test procedure 59 BS EN 45545-2:2013+A1:2015EN 45545-2:2013+A1:2015 (E) 4 C.8.3 End of test 60 C.8.4 Data acquisition 60 C.9 Data treatment 61 C.10 Test report for Method 1 . 61 C.11 Use of alternative gas analysis techniques to FTIR 63 C.12 Method 2 Test apparatus 64

31、 C.13 Test environment (Method 2) . 64 C.14 Conditioning of samples 64 C.15 Test for gases using Method 2 . 64 C.16 Calculations of CIT 65 C.16.1 Introduction . 65 C.16.2 General products (CITG) 65 C.16.3 Non-listed products (CITNLP) . 65 Annex D (normative) Protocol for test specimen preparation in

32、 standard tests 67 D.1 Protocol for specimen preparation for tests according to EN ISO 5659-2 and ISO 5660-1 67 D.2 Protocol for specimen preparation of upholstered furniture assembled products for tests according to EN ISO 5659-2 and ISO 5660-1 67 D.2.1 Scope and field of application 67 D.2.2 Prepa

33、ration of test specimens . 67 D.2.2.1 General . 67 D.2.2.2 Test specimen preparation. 68 D.2.2.3 Reporting of Mass . 68 D.3 Protocol for test specimen preparation for flame spread testing 68 D.3.1 Scope and field of application 68 D.3.2 Test specimen preparation. 68 Annex ZA (informative) Relationsh

34、ip between this European Standard and the Essential Requirements of EU Directive 2008/57/EC . 70 Bibliography . 73 BS EN 45545-2:2013+A1:2015EN 45545-2:2013+A1:2015 (E) 4 C.8.3 End of test 60 C.8.4 Data acquisition 60 C.9 Data treatment 61 C.10 Test report for Method 1 . 61 C.11 Use of alternative g

35、as analysis techniques to FTIR 63 C.12 Method 2 Test apparatus 64 C.13 Test environment (Method 2) . 64 C.14 Conditioning of samples 64 C.15 Test for gases using Method 2 . 64 C.16 Calculations of CIT 65 C.16.1 Introduction . 65 C.16.2 General products (CITG) 65 C.16.3 Non-listed products (CITNLP) .

36、 65 Annex D (normative) Protocol for test specimen preparation in standard tests 67 D.1 Protocol for specimen preparation for tests according to EN ISO 5659-2 and ISO 5660-1 67 D.2 Protocol for specimen preparation of upholstered furniture assembled products for tests according to EN ISO 5659-2 and

37、ISO 5660-1 67 D.2.1 Scope and field of application 67 D.2.2 Preparation of test specimens . 67 D.2.2.1 General . 67 D.2.2.2 Test specimen preparation. 68 D.2.2.3 Reporting of Mass . 68 D.3 Protocol for test specimen preparation for flame spread testing 68 D.3.1 Scope and field of application 68 D.3.

38、2 Test specimen preparation. 68 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC . 70 Bibliography . 73 BS EN 45545-2:2013+A1:2015EN 45545-2:2013+A1:2015 (E) 5 European foreword This document (EN 45545-2:2013+A1:2015) has be

39、en prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2016, and conflicting national

40、standards shall be withdrawn at the latest by April 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amend

41、ment 1 approved by CEN on 2015-08-14. This document supersedes !EN 45545-2:2013“. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade A

42、ssociation, and supports essential requirements of EU Directive 2008/57/EC. For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of this document. This series of European standards Railway applications Fire protection on railway vehicles consists of: Par

43、t 1: General; Part 2: Requirements for fire behaviour of materials and components; Part 3: Fire resistance requirements for fire barriers; Part 4: Fire safety requirements for railway rolling stock design; Part 5: Fire safety requirements for electrical equipment including that of trolley buses, tra

44、ck guided buses and magnetic levitation vehicles; Part 6: Fire control and management systems; Part 7: Fire safety requirements for flammable liquid and flammable gas installations. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are

45、 bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Por

46、tugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 45545-2:2013+A1:2015EN 45545-2:2013+A1:2015 (E) 6 Introduction EN 45545-2 has been developed from existing fire safety regulations for railway vehicles from the International Union of Railways (UIC)

47、and different European countries. In using the operation and design categories defined in EN 45545-1, the requirements laid down in this part take into account the current operating conditions for European public rail transport. BS EN 45545-2:2013+A1:2015EN 45545-2:2013+A1:2015 (E) 6 Introduction EN

48、 45545-2 has been developed from existing fire safety regulations for railway vehicles from the International Union of Railways (UIC) and different European countries. In using the operation and design categories defined in EN 45545-1, the requirements laid down in this part take into account the cu

49、rrent operating conditions for European public rail transport. BS EN 45545-2:2013+A1:2015EN 45545-2:2013+A1:2015 (E) 7 1 Scope This part of EN 45545 specifies the reaction to fire performance requirements for materials and products used on railway vehicles as defined in EN 45545-1. The operation and design categories defined in EN 45545-1 are used to establish hazard levels that are used as the basis of a classification system. For each hazard level, this part specifies the test methods, test conditions and reaction to fire performance requirements. It