EN 844-3-1995 en Round and Sawn Timber - Terminology - Part 3 General Terms Relating to Sawn Timber《圆木和锯木 术语 第3部分 与锯木有关的通用术语》.pdf

《EN 844-3-1995 en Round and Sawn Timber - Terminology - Part 3 General Terms Relating to Sawn Timber《圆木和锯木 术语 第3部分 与锯木有关的通用术语》.pdf》由会员分享，可在线阅读，更多相关《EN 844-3-1995 en Round and Sawn Timber - Terminology - Part 3 General Terms Relating to Sawn Timber《圆木和锯木 术语 第3部分 与锯木有关的通用术语》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 844-3:1995 Round and sawn timber Terminology Part 3: General terms relating to sawn timber The European Standard EN 844-3:1995 has the status of a British StandardBSEN844-3:1995 This British Standard, having been prepared under the directionof the Sector Board forBuilding and

2、Civil Engineering, was published underthe authority of the Standards Board and comes intoeffect on 15 July 1995 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference B/543/1 Draft for comment 92/17475 DC ISBN 0 580 24281 1 Committees responsible for this B

3、ritish Standard The preparation of this British Standard was entrusted by Technical Committee B/543, Round and sawn timber, to Subcommittee B/543/1, Timber terminology and measurement, upon which the following bodies were represented: British Timber Merchants Association British Woodworking Federati

4、on Council of the Forest Industries of British Columbia Department of the Environment (Building Research Establishment) Forestry Commission National Council of Building Material Producers National House-Building Council Royal Institute of British Architects Timber Packaging and Pallet Confederation

5、Timber Trade Federation Trussed Rafter and Fabricators Association United Kingdom Softwood Sawmillers Association Amendments issued since publication Amd. No. Date CommentsBSEN844-3:1995 BSI 10-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 1 Scope 3 2

6、 Terms and definitions 3 Alphabetic index of terms 15BSEN844-3:1995 ii BSI 10-1999 National foreword This British Standard has been prepared by Technical Committee B/543/1 and is the English language version of EN 844-3:1995 Round and sawn timber Terminology Part 3: General terms relating to sawn ti

7、mber, published by the European Committee for Standardization (CEN). No existing British Standard is superseded A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a Briti

8、sh Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN title page, pages 2 to 17 and a back cover. This standard has been updated (see copyright date) and may have had amendments inco

9、rporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 844-3 March 1995 ICS 01.040.79; 79.020; 79 040 Descriptors: Wood, sawn timber, vocabulary English version Round and sawn timber Terminology Part 3: General terms rel

10、ating to sawn timber Bois ronds et bois scis Terminologie Partie 3: Termes gnraux relatifs aux bois scis Rund- und Schnittholz Terminologie Teil3: Allgemeine Begriffe ber Schnittholz This European Standard was approved by CEN on 1994-10-31. CEN members are bound to comply with the CEN/CENELEC Intern

11、al Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.

12、 This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members ar

13、e the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Kom

14、itee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 Copyright reserved to CEN members Ref. No. EN 844-3:1995 EEN 844-3:1995 2 BSI 10-1999EN 844-3:1995 BSI 10-1999 3EN 844-3:1995 4 BSI 10-1999EN 844-3:1995 BSI 10-1999 5EN 844-3:1995 6 BSI 10-1999EN 844-3:1995 BSI 10-1999 7EN

15、 844-3:1995 8 BSI 10-1999EN 844-3:1995 BSI 10-1999 9EN 844-3:1995 10 BSI 10-1999EN 844-3:1995 BSI 10-1999 11EN 844-3:1995 12 BSI 10-1999EN 844-3:1995 BSI 10-1999 13EN 844-3:1995 14 BSI 10-1999EN 844-3:1995 BSI 10-1999 15EN 844-3:1995 16 BSI 10-1999EN 844-3:1995 BSI 10-1999 17BS EN 844-3:1995 BSI 389

16、 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated

17、 by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStan

18、dard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editio

19、ns of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have b

20、een published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also ava

21、ilable which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and othe

22、r benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents

23、 Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary de

24、tails such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.