EN 822-2013 en Thermal insulating products for building applications - Determination of length and width《建筑物隔热产品 长度和宽度的测定》.pdf

《EN 822-2013 en Thermal insulating products for building applications - Determination of length and width《建筑物隔热产品 长度和宽度的测定》.pdf》由会员分享，可在线阅读，更多相关《EN 822-2013 en Thermal insulating products for building applications - Determination of length and width《建筑物隔热产品 长度和宽度的测定》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationThermal insulating products for building applications Determination of length andwidthBS EN 822:2013National forewordThis British Standard is the UK implementation of EN 822:2013

2、. It supersedesBS EN 822:1995 which is withdrawn.The UK participation in its preparation was entrusted to Technical CommitteeB/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publicati

3、on does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2013Published by BSI Standards Limited 2013ISBN 978 0 580 78035 6ICS 91.100.60Compliance with a British Standard cannot confer immunity froml

4、egal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 30 April 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 822:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 822 March 2013 ICS

5、91.100.60 Supersedes EN 822:1994English Version Thermal insulating products for building applications - Determination of length and width Produits isolants thermiques destins aux applications du btiment - Dtermination de la longueur et de la largeur Wrmedmmstoffe fr das Bauwesen - Bestimmung der Lng

6、e und Breite This European Standard was approved by CEN on 15 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibli

7、ographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons

8、ibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repub

9、lic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMAL

10、ISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 822:2013: EBS EN 822:2013EN 822:2013 (E) 2 Contents Page Foreword . 3 1 Scope 5 2 Norm

11、ative references . 5 3 Terms and definitions 5 4 Principle 5 5 Apparatus . 5 6 Test specimens 5 7 Procedure . 6 8 Calculation and expression of results 7 9 Accuracy of measurement . 7 10 Test report 7 BS EN 822:2013EN 822:2013 (E) 3 Foreword This document (EN 822:2013) has been prepared by Technical

12、 Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national

13、standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes

14、 EN 822:1994. The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and pro

15、ducts. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (89/106/EEC) throu

16、gh the consideration of the essential requirements. This European Standard has been drafted for applications in building but it may also be used in other areas where it is relevant. This European test standard is one of the following group of interrelated standards on test methods for determining di

17、mensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickn

18、ess EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1602, Thermal

19、insulating products for building applications Determination of the apparent density EN 1603, Thermal insulating products for building applications Determination of dimensional stability under constant normal laboratory conditions (23 C/50 % relative humidity) EN 1604, Thermal insulating products for

20、 building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating produc

21、ts for building applications Determination of compressive creep BS EN 822:2013EN 822:2013 (E) 4 EN 1607, Thermal insulating products for building applications Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications Determination of tens

22、ile strength parallel to faces EN 1609, Thermal insulating products for building applications Determination of short-term water absorption by partial immersion EN 12085, Thermal insulating products for building applications Determination of linear dimensions of test specimens EN 12086, Thermal insul

23、ating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications Determination of long-term water absorption by immersion EN 12088, Thermal insulating products for building applications Determination of lon

24、g-term water absorption by diffusion EN 12089, Thermal insulating products for building applications Determination of bending behaviour EN 12090, Thermal insulating products for building applications Determination of shear behaviour EN 12091, Thermal insulating products for building applications Det

25、ermination of freeze-thaw resistance EN 12429, Thermal insulating products for building applications Conditioning to moisture equilibrium under specified temperature and humidity conditions EN 12430, Thermal insulating products for building applications Determination of behaviour under point load EN

26、 12431, Thermal insulating products for building applications Determination of thickness for floating floor insulating products EN 13793, Thermal insulating products for building applications Determination of behaviour under cyclic loading EN 13820, Thermal insulating materials for building applicat

27、ions Determination of organic content According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugos

28、lav of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 822:2013EN 822:2013 (E) 5 1 Scope This European Stan

29、dard specifies the equipment and procedures for determining the length and width of full-size products. It is applicable to thermal insulating products. 2 Normative references This European Standard contains no normative references. 3 Terms and definitions For the purposes of this document, the foll

30、owing terms and definitions apply. 3.1 length l longer linear dimension of the major surface of the test specimen 3.2 width b shorter linear dimension of the major surface of the test specimen, measured at right angles to the length 4 Principle A test specimen is placed on a flat surface and direct

31、linear measurement is made with a metal rule or a metal tape. 5 Apparatus 5.1 A flat surface. 5.2 Metal rule or metal tape, graduated in millimetres and permitting reading to an accuracy of 0,5 mm. Any test equipment which provides the same result with at least the same accuracy may be used. 6 Test

32、specimens 6.1 Dimensions of test specimens The test specimen shall be the full-size product. 6.2 Number of test specimens The number of test specimens shall be as specified in the relevant product standard. In the absence of a product standard, the number of test specimens may be agreed between part

33、ies. 6.3 Conditioning of test specimens The test specimens shall be stored for at least 6 h at (23 5) C. In cases of dispute, they shall be stored at (23 2) C and (50 5) % relative humidity for the time specified in the relevant product standard. BS EN 822:2013EN 822:2013 (E) 6 7 Procedure 7.1 Test

34、conditions The test shall be carried out at (23 5) C. In cases of dispute, it shall be carried out at (23 2) C and (50 5) % relative humidity. 7.2 Test procedure Lay the test specimen carefully on a flat surface. For test specimens with both dimensions less than or equal to 1,5 m, take one measureme

35、nt of length, l, and one measurement of width, b, at the positions shown in Figure 1. For test specimens greater than 1,5 m in length, make one additional width measurement for each extra metre of length, up to a maximum of five measurements, with the measurements equally spaced as shown in Figure 2

36、. For test specimens greater than 1,5 m in width, make one additional length measurement for each extra metre of width, with the measurements equally spaced. All lengths and widths shall be read to the nearest millimetre. Key l length b width Figure 1 Positions for measuring length and width of a te

37、st specimen, where both l and b 1,5 mBS EN 822:2013EN 822:2013 (E) 7 Key b mean value of all measured values of width Figure 2 Positions for measuring length and width of a test specimen, where l 4,5 m and b 1,5 m 8 Calculation and expression of results The length and width shall be expressed in mil

38、limetres, to the nearest millimetre, as the mean value for each test specimen. For products 3 m in length or greater, the length value shall be rounded to the nearest 5 mm. 9 Accuracy of measurement NOTE It has not been possible to include a statement of the accuracy of the method in this edition of

39、 the standard, but it is intended to include such a statement when the standard is next revised. 10 Test report The test report shall include the following information: a) reference to this European Standard; b) product identification: 1) product name, factory, manufacturer or supplier; 2) productio

40、n code number; 3) type of product; 4) packaging; 5) the form in which the product arrived at the laboratory; 6) other information as appropriate, e.g. nominal thickness, nominal density; c) test procedure: 1) pre-test history and sampling (e.g. who sampled and place of sampling); BS EN 822:2013EN 82

41、2:2013 (E) 8 2) conditioning; 3) deviations from Clauses 6 and 7, if any; 4) date of test; 5) general information relating to the test; 6) any occurrences which may have affected the results. Information about the apparatus and identity of the technician should be available in the laboratory, but it

42、 need not be recorded in the report; d) results: all individual values and the mean value for each dimension. BS EN 822:2013This page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and serv

43、ices. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Ro

44、ad London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our pro

45、ducts and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.T

46、el: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standard

47、sYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In respons

48、e to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Cent

49、re.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002