EN 2356-1988 en Fork-Ends Threaded Control Cable for Rolling Bearings in Corrosion Resisting Steel Dimensions and Loads《航空航天系列 滚动轴承用防腐钢叉端螺纹操纵钢索 尺寸和负荷》.pdf

《EN 2356-1988 en Fork-Ends Threaded Control Cable for Rolling Bearings in Corrosion Resisting Steel Dimensions and Loads《航空航天系列 滚动轴承用防腐钢叉端螺纹操纵钢索 尺寸和负荷》.pdf》由会员分享，可在线阅读，更多相关《EN 2356-1988 en Fork-Ends Threaded Control Cable for Rolling Bearings in Corrosion Resisting Steel Dimensions and Loads《航空航天系列 滚动轴承用防腐钢叉端螺纹操纵钢索 尺寸和负荷》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、” g CEN EN*235b 88 3L.lL1589 0.002203 b EUROPEAN SIANDAR D NORME EUROPENNE - EUROPISCHE NORM EN 2356 September 1988 UDC : 629.7.05 : 621 .i54 : 621.52.053.004.1 Key words : Aircraft industry, flight control, flexible cable, cable tensioner, cable-end. dimensions, breaking loads. English version Aero

2、space series Fork-ends threaded, control cable for rolling bearings in corrosion resisting steel Dimensions and loads Srie arospatiale Embouts chape de tendeurs pour roulements en acier rsistant la corrosion Dimensions et charges Luft- und Raumfahrt Spannschrauben mit Gbe1 fr Kugellager aus korrosio

3、nsbectandigem Stahl Mae und Belastungen This European Standard was accepted by CEN on 1988-03-1 7. CEN members are bound to comply with the requirements of CEN Internal Regulations which stipulate the conditionsfor giving this European Standard the statusof a national standard without any alteration

4、. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). Aversion in any other languge made by translati

5、on under the responsibilityof a CEN member into its own language and notified to CEN Central Secretariat has the same status as the official versions. CEN members are the national standards organizations of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Netherlands, Nor

6、way, Portugal, Spain, Cweden, Cwitzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat : Rue Brderode 2, B-1 O00 Bruxelles Ref. Nr EN 2356 : 1988 E EN 2356 Page 2 CEN EN*235b 88 D 3404587 0002204 8 .

7、Brief Hist orv This of Aerospace Manufacturers (AECMA). draft European Standard has been prepared by the European Association After enquirles and votes carried out in accordance with the rules of this Association, this draft has successively received the approval of the National Associations and the

8、 Official Services of the member countries of AECMA, prior to its presentation to CEN. In accordance with the Common CEN/CENELEC Rules, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Netherlands, Nor

9、way, Portugal, Spain, Sweden, Switzerland and United Kingdom. t -.I - CEN EN*235b BEI m 340Y587 0002205 T 1 EN 2356 Page 3 Scope and field of application This standard specifies the characteristics of threaded iork-en 2012, EN 2013 and EN 2014, in corrosion resisting steel, intended for the turnbuck

10、les of aircraft control cables. 2 Yeferences IS0 2020, Aerospace - Mechacical system parts - Preformed flexible steel wire rope for aircraft controls - Technical specification. :SO 5855/1, Aerospace construction - MJ threads - Part 1 : Basic profile IS0 5855/2, Aerospace ccnstruction - MJ threads -

11、Part 2 : Dimensions for bolts and nuts EN 2012, EN 2013, EN 2014, EN 2363, EN 2462, EN 2516, EN 2569, Bearings - airframe rolling, rigid, single row ball bearings, in steel - Diameter series O and 2 - Dimensions and loads - Aerospace series Bearings - airframe rolling, rigid, single row ball bearing

12、s, in steel, cadmium plated - Diameter series O and 2 - Dimensions and loads - Aerospace series Bearings - airframe rolling, rigid, single row ball bearings, in corrosion resisting steel - Diameter series O and 2 - Dimensions and loads - Aerospace series Aerospace series - Locking clips for turnbuck

13、les of control cables - Dimensions Steel FE-PA13 - Softened - Bars De CnN O Ln 03 N N N cn n 0-0- - +i - LO CD W 4 c - c N m o- c +I a- c 00 cn O b I I l- CEN EN*2356 88 m 3i.104589 O002208 5 m i3 2356 Page 6 4 Designation Each threaded fork-end for rolling bearings shall only be designated as in Ch

14、e following example : Description block FORK-END THREADED Identity block -JI L = Thread direction code 06 = Thread code, see table 1 S = Length code, see table Where the following codes are applied for the thread direction : R : right-hand thread L : left-hand thread Note : If necessary, originator

15、code S9005 may be introduced between the description block and identity block. 5 Marking In addition to the manufacturers own marking, each threaded fork-end for rolling bearings shall be marked (see figure) using the identity block as defined in clause 4 of this standard. The marking method is to t

16、he manufacturers option. 6 Technical specification The threaded fork-ends for rolling bearings supplied according to this standard shall conform with the requirements of EN 2569. British Standard EN 2356 : 1989 National appendix A National appendix B The United Kingdom participation in the preparati

17、on of this European Standard was entrusted by the Aerospace Standards Policy Committee (ACE/-) to Technical Committee ACE/14 upon which the following bodies were represented: British Independent Steel Producers Association Civil Aviation Authority (Airworthiness Division) Federation of Wire Rope Man

18、ufacturers of Great Britain Ministry of Defence Society of British Aerospace Companies Ltd. Stainless Steel Wire Export Group The British Standards corresponding to the European and International Standards referred to in the text are identical in number and title to those given in clause 2 with the

19、exception of IS0 2020, IS0 5855/1 and IS0 5855/2 for which the corresponding British Standards are British Standard W13 (related), BS 6293 : Part 1 (identical) and BS 6293 : Part 2 (identical) respectively. CEN EN*2356 88 This British Standard, having been prepared under the direction of the Aerospa

20、ce Standards Policy Committee, was published under the authority of the Board of BSI and comes into effect on 31 October 1989 O British Standards Institution, 1989 ISBN O 580 17726 2 The following BSI references relate to the work on this standard: Committee reference ACE/14 Draft for comment 88/704

21、02 DC British Standards Institution. Incorporated by Royal Charter, BSI is the independent national body for the preparation of British Standards. It is the UK member of the International Organization for Standardization and UK sponsor of the British National Committee of the International Electrote

22、chnical Commission. In addition to the preparation and promulgation of standards, BSI offers specialist services including the provision of information through the BSI Library and Standardline Database; Technical Help to Exporters; and other services. Advice can be obtained from the Enquiry Section,

23、 BSI, Milton Keynes MK14 6LE, telephone 0908 221166, telex 825777. Copyright. Users of British Standards are reminded that copyright subsists in all BSI publications. No part of this publication may be reproduced in any form without the prior permission in writing of BSI. This does not preclude the

24、free use, in the course of 3404589 O002220 3 = British Standard EN2356:1989 implenienting the standard, of necessary details such as symbols and size, type or grade designations. Enquiries should be addressed to the Publications Manager, BSI, Linford Wood, Milton Keynes MK14 6LE. The number for tele

25、phone enquiries is 0908 220022 and for telex 825777. Contract requirements. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Revision of British Standards. British Standards are revise

26、d, when necessary, by the issue either of amendments or of revised editions. It is important that users of British Standards should ascertain that they are in possession of the latest amendments or editions. Automatic updating service. BCI provides an economic, individual and automatic standards upd

27、ating service called PLUS. Details are available from BSI Enquiry Section at Milton Keynes, telephone 0908 221 166, telex 825777. Information on.all BSI publications is in the BSI Catalogue, supplemented each month by BSI News which is available to subscribing members of BSI and gives details of new

28、 publications, revisions, amendments and withdrawn standards. Any person who, when making use of a British Standard, encounters an inaccuracy or ambiguity, is requested to notify BSI without delay in order that the matter may be investigated and appropriate action taken. Cooperating organizations Th

29、e European Committee for Standardization, under whose supervision this European Standard was prepared, comprises the national standards organizations of the following Western European countries. Austria Oesterreichisches Normungsinstitut Belgium Institut belge de normalisation Denmark Dansk Standard

30、iseringsraad Finland Suomen Standardisoimisliito, r.y. France Association francaise de normalisation Germany Greece Hellenic Organization for Standardization Ireland Italy Netherlands Nederlands Normalisatie-inctituut Norway Norges Standardiseringsforbund Portugal Instituto Portugus da Qualidade Spa

31、in Instituto Espaol de Normalizacin Sweden Standardiseringskommissionen i Sverige Switzerland Association suisse de normalisation United Kingdom British Standards Institution Deutsches Institut fr Normung e.V. National Standards Authority of Ireland Ente Nazionale Italiano di Unificazione Amendments issued since publication Amd. No. Date of issue Text affected British Standards Institution 2 Park Street London WIA 2BS - Telephone 01-629 9000 Telex 266933 ACE114 8910-4-1.25k- B