EN 1870-18-2013 en Safety of woodworking machines - Circular sawing machines - Part 18 Dimension saws《木工机械安全性 圆盘锯床 第18部分 尺寸锯》.pdf

《EN 1870-18-2013 en Safety of woodworking machines - Circular sawing machines - Part 18 Dimension saws《木工机械安全性 圆盘锯床 第18部分 尺寸锯》.pdf》由会员分享，可在线阅读，更多相关《EN 1870-18-2013 en Safety of woodworking machines - Circular sawing machines - Part 18 Dimension saws《木工机械安全性 圆盘锯床 第18部分 尺寸锯》.pdf（86页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 1870-18:2013Safety of woodworking machines Circular sawing machinesPart 18: Dimension sawsIncorporating Corrigendum May 2013BS EN 1870-18:2013 BRITISH STANDARDNational fore

2、wordThis British Standard is the UK implementation of EN 1870-18:2013. Together with BS EN 1870-19, it supersedes BS EN 1870-1:2007+A1:2009 which will be withdrawn on publication of BS EN 1870-19.The UK participation in its preparation was entrusted to TechnicalCommittee MTE/23, Woodworking machines

3、.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI Standar

4、ds Limited 2013 ISBN 978 0 580 83232 1 ICS 79.120.10 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2013. Amendments/corrigenda issued since publicationDat

5、e Text affected30 June 2013 Addition of supersession detailsBS EN 1870-18:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1870-18 April 2013 ICS 79.120.10 Supersedes EN 1870-1:2007+A1:2009English Version Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws Scu

6、rit des machines pour le travail du bois - Machines scies circulaires - Partie 18: Scies au format Sicherheit von Holzbearbeitungsmaschinen - Kreissgemaschinen - Teil 18: FormatkreissgemaschinenThis European Standard was approved by CEN on 7 March 2013. CEN members are bound to comply with the CEN/C

7、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centr

8、e or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the

9、official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla

10、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploita

11、tion in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1870-18:2013: EBS EN 1870-18:2013EN 1870-18:2013 (E) 2 Contents Page Foreword . 4 Introduction 6 1 Scope 7 2 Normative references . 7 3 Terms and definitions 10 4 List of significant hazards . 14 5 Safety requ

12、irements and/or measures 17 5.1 General . 17 5.2 Controls 17 5.2.1 Safety and reliability of control systems . 17 5.2.2 Position of controls 18 5.2.3 Starting . 20 5.2.4 Normal stopping . 20 5.2.5 Emergency stop . 21 5.2.6 Mode selection . 21 5.2.7 Speed control . 22 5.2.8 Power operated adjustment

13、of the saw blade(s) and/or fence(s) . 23 5.2.9 Interlocking of guards, movements and functions . 24 5.2.10 Failure of the power supply . 24 5.2.11 Failure of the control circuits 24 5.3 Protection against mechanical hazards 24 5.3.1 Stability . 24 5.3.2 Hazard of break up during operation 25 5.3.3 T

14、ool holder and tool design . 25 5.3.4 Braking . 29 5.3.5 Devices to minimise the possibility or the effect of kickback 30 5.3.6 Workpiece supports and guides 35 5.3.7 Prevention of access to moving parts 39 5.3.8 Powered workpiece clamping 49 5.3.9 Safety appliances . 50 5.4 Protection against non-m

15、echanical hazards 53 5.4.1 Fire 53 5.4.2 Noise . 53 5.4.3 Emission of chips and dust . 54 5.4.4 Electricity 55 5.4.5 Ergonomics and handling 56 5.4.6 Pneumatics . 57 5.4.7 Electromagnetic compatibility . 57 5.4.8 Laser . 57 5.4.9 Static electricity 57 5.4.10 Errors of fitting . 58 5.4.11 Supply disc

16、onnection (Isolation) . 58 5.4.12 Maintenance . 58 6 Information for use . 59 6.1 General . 59 6.2 Marking . 59 6.2.1 Marking of the machine . 59 6.2.2 Marking of riving knives 60 BS EN 1870-18:2013EN 1870-18:2013 (E) 3 6.3 Instruction handbook . 60 Annex A (normative) Saw spindle dimensional tolera

17、nces . 65 Annex B (normative) Riving knife mounting strength test 66 Annex C (normative) Riving knife lateral stability test 67 Annex D (normative) Minimum dimensions of the machine table, extension table . 68 Annex E (normative) Saw blade guard stability test 69 E.1 General . 69 E.2 Separately from

18、 riving knife mounted saw blade guards . 69 E.2.1 Saw blade guards with lead-in . 69 E.2.2 Saw blade guards with in-feed rollers . 70 E.3 Riving knife mounted saw blade guards . 71 Annex F (normative) Impact test method for guards . 73 F.1 General . 73 F.2 Test method 73 F.2.1 Preliminary remarks .

19、73 F.2.2 Testing equipment 73 F.2.3 Projectile for guards . 73 F.2.4 Sampling . 73 F.2.5 Test procedure . 73 F.3 Results 74 F.4 Assessment 74 F.5 Test report 74 F.6 Test equipment for impact test 74 Annex G (normative) Braking tests 76 G.1 Conditions for all tests . 76 G.2 Tests . 76 G.2.1 Un-braked

20、 run-down time 76 G.2.2 Braked run-down time 76 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 77 Bibliography 80 BS EN 1870-18:2013EN 1870-18:2013 (E) 4 Foreword This document (EN 1870-18:2013) has been prepared by Techni

21、cal Committee CEN/TC 142 “Woodworking machines - Safety”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2013, and conflicting national standards

22、shall be withdrawn at the latest by October 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document, together with EN 1870

23、-19, supersedes EN 1870-1:2007+A1:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is a

24、n integral part of this document. EN 1870, Safety of woodworking machines Circular sawing machines, consists of the following parts: Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws; Part 3: Down cutting cross-cut saws and dual purpose down cutting

25、 cross-cut saws/circular saw benches; Part 4: Multiblade rip sawing machines with manual loading and/or unloading; Part 5: Circular saw benches/up-cutting cross-cut sawing machines; Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benc

26、hes, with manual loading and/or unloading; Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading; Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading; Part 9: Double blade circular s

27、awing machines for cross-cutting with integrated feed and with manual loading and/or unloading; Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines; Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws); Par

28、t 12: Pendulum cross-cut sawing machines; Part 13: Horizontal beam panel sawing machines; Part 14: Vertical panel sawing machines; Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading; BS EN 1870-18:2013EN 1870-18:2013 (E) 5 Part 16

29、: Double mitre sawing machines for V cutting; Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws); Part 18: Dimension saws (the present document); Part 19: Circular saw benches (with and without sliding table) and building site saws. The European Standard

30、s produced by CEN/TC 142 are particular to woodworking machines and complement the relevant A and B Standards on the subject of general safety (see Introduction of EN ISO 12100:2010 for a description of A, B and C standards). According to the CEN-CENELEC Internal Regulations, the national standards

31、organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo

32、urg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1870-18:2013EN 1870-18:2013 (E) 6 Introduction This document has been prepared to be a harmonised standard to provide one means of conforming to the essent

33、ial safety requirements of the Machinery Directive and associated EFTA regulations. This document is a type “C“ standard as defined in EN ISO 12100:2010. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document.

34、When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of other standards, for machines that have been designed and built according to the provisions of this type C standar

35、d. The requirements of this document are directed to manufacturers and their authorised representatives of dimension saws. They are also useful for designers. This document also includes provisions and examples of information to be provided by the manufacturer to the user. Common requirements for to

36、oling are given in EN 847-1:2005+A1:2007. BS EN 1870-18:2013EN 1870-18:2013 (E) 7 1 Scope This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable dimensions saws, hereinafter referred to as “ma

37、chines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Ma

38、chines which are designed to work wood based materials may also be used for working rigid plastic materials with similar physical characteristics as wood. The machine may have any of the following features: a) facility for the saw blade and scoring saw blade (if any) to be raised and lowered; b) fac

39、ility to tilt the main saw blade and scoring saw blade (if any) for angled cutting; c) facility for scoring; d) facility for grooving with milling tool; e) demountable power feed unit; f) post-formed edge pre-cutting unit; g) power operated sliding table; h) workpiece clamping. NOTE 1 For the defini

40、tion of stationary and displaceable machine, see 3.10 and 3.11. NOTE 2 Dimension saws are used for ripping, cross cutting, dimensioning and grooving. The requirements of this document apply also to machines designed for grooving with a width not exceeding 20 mm in one pass by using a milling tool. T

41、his document is not applicable to dimension saws which are manufactured before the date of its publication as a European Standard. NOTE 3 Machines covered by this document are listed under 1.1 of Annex IV of the Machinery Directive. 2 Normative references The following documents, in whole or in part

42、, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 614-1:2006+A1:2009, Safety of machinery Ergonomi

43、c design principles Part 1: Terminology and general principles EN 847-1:2005+A1:2007, Tools for woodworking Safety requirements Part 1: Milling tools, circular saw blades EN 894-1:1997+A1:2008, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 1: Gener

44、al principles for human interactions with displays and control actuators BS EN 1870-18:2013EN 1870-18:2013 (E) 8 EN 894-2:1997+A1:2008, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 2: Displays EN 894-3:2000+A1:2008, Safety of machinery Ergonomics

45、requirements for the design of displays and control actuators Part 3: Control actuators EN 1005-1:2001+A1:2008, Safety of machinery Human physical performance Part 1: Terms and definitions EN 1005-2:2003+A1:2008, Safety of machinery Human physical performance Part 2: Manual handling of machinery and

46、 component parts of machinery EN 1005-3:2002+A1:2008, Safety of machinery Human physical performance Part 3: Recommended force limits for machinery operation EN 1005-4:2005+A1:2008, Safety of machinery Human physical performance Part 4: Evaluation of working postures and movements in relation to mac

47、hinery EN 1037:1995+A1:2008, Safety of machinery Prevention of unexpected start-up EN 1088:1995+A2:2008, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 50370-1:2005, Electromagnetic compatibility (EMC) Product family standard for machine tools

48、Part 1: Emission EN 50370-2:2003, Electromagnetic compatibility (EMC) Product family standard for machine tools Part 2: Immunity EN 50525-2-21:2011, Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) Part 2-21: Cables for general applications Flexible ca

49、bles with crosslinked elastomeric insulation EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 60439-1:19991), Low voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies (IEC 60439-1:1999) EN 60529:19912), Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN 60825-1:2007, Safety of laser products Part 1: Equipment classif