EN 1492-4-2004 en Textile slings - Safety - Part 4 Lifting slings for general service made from natural and man-made fibre ropes (Incorporates Amendment A1 2008)《纺织吊索 安全性 第4部分 通用天然.pdf

《EN 1492-4-2004 en Textile slings - Safety - Part 4 Lifting slings for general service made from natural and man-made fibre ropes (Incorporates Amendment A1 2008)《纺织吊索 安全性 第4部分 通用天然.pdf》由会员分享，可在线阅读，更多相关《EN 1492-4-2004 en Textile slings - Safety - Part 4 Lifting slings for general service made from natural and man-made fibre ropes (Incorporates Amendment A1 2008)《纺织吊索 安全性 第4部分 通用天然.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 1492-4:2004 Textile slings Safety Part 4: Lifting slings for general service made from natural and man-made fibre ropes ICS 53.020.30 +A1:2008BS EN 1492-4:2004+A1:2008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 14

2、June 2004 BSI 2009 ISBN 978 0 580 60266 5 Amendments/corrigenda issued since publication 30 June 2009 Implementation of CEN amendment A1:2008 Date Comments National foreword This British Standard is the UK implementation of EN 1492-4:2004+A1:2008. It supersedes BS EN 1492-4:2004 which is withdrawn.

3、The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by The UK participation in its preparation was entrusted to Technica

4、l Committee MHE/15, Textile slings. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British

5、 Standard cannot confer immunity from legal obligations. ! “. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1492-4:2004+A1 November 2008 ICS 53.020.30 Supersedes EN 1492-4:2004 English Version Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made

6、fibre ropes Elingues textiles - Scurit - Partie 4: Elingues de levage en cordage en fibres naturelles et chimiques pour service gnral Textile Anschlagmittel - Sicherheit - Teil 4: Anschlag- Faserseile fr allgemeine Verwendung aus Natur- und Chemiefaserseilen This European Standard was approved by CE

7、N on 12 February 2004 and includes Amendment 1 approved by CEN on 11 September 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a

8、nd bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons

9、ibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icel

10、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de

11、 Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1492-4:2004+A1:2008: EEN 1492-4:2004+A1:2008 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definition

12、s .6 4 Hazards .8 5 Safety requirements 9 6 Verification .18 7 Marking .20 8 Manufacturers certificate .21 9 Instructions for use .21 Annex A (normative) Information for use and maintenance to be provided by the manufacturer22 Annex B (informative) Working load limits for various modes of use24 Anne

13、x C (informative) Suggested content of information to be provided by the manufacturer with fibre rope slings.36 Annex ZA (informative) ! ! ! !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“ “ “ “.40 Annex ZB (informative) ! ! ! !Relationship betwe

14、en this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ “ “ “.41 Bibliography 42 BS EN 1492-4:2004+A1:2008EN 1492-4:2004+A1:2008 (E) 3 Foreword This document (EN 1492-4:2004+A1:2008) has been prepared by Technical Committee CEN/TC 168 “Chains, ropes, webbing, slings and

15、accessories - Safety”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009 and conflicting national standards shall be withdrawn at the latest by Dece

16、mber 2009. This document supersedes EN 1492-4:2004. This document includes Amendment 1, approved by CEN on 2008-09-11. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Com

17、mission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ This European Standard is one of a series of standards related to safety for

18、 textile slings as listed below: Part 1: Specification for flat woven webbing slings, made of man-made fibres, for general purpose use Part 2: Specification for roundslings, made of man-made fibres, for general purpose Part 4: Specification for lifting slings for general service made from natural an

19、d man-made fibre rope In this standard: Annex A is normative, and gives the requirements for information on use and maintenance to be provided by the manufacturer with fibre rope slings conforming to this standard. Annex B is informative, and gives the working load limits for different configuration

20、s and types of material for fibre rope slings to this standard. Annex C is informative, and provides some detailed information for use and maintenance which may be appropriate in compiling the information in accordance with annex A. According to the CEN/CENELEC Internal Regulations, the national sta

21、ndards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

22、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 1492-4:2004+A1:2008EN 1492-4:2004+A1:2008 (E) 4 Introduction This European Standard has been prepared to be a harmonized standard providing one means of complying with the essential safety requirements of the

23、 Machinery Directive and associated EFTA regulations. This European Standard is a type C standard as specified in EN ISO 12100-2. The lifting accessories concerned and the extent to which hazards are covered is indicated in the scope of this standard. NOTE For hazards that are not covered by this st

24、andard, lifting accessories should be in accordance with EN ISO 12100-2. BS EN 1492-4:2004+A1:2008EN 1492-4:2004+A1:2008 (E) 5 1 Scope This European Standard specifies the requirements related to safety, including methods of rating and testing single-, two-, three-, four-leg and endless slings, with

25、 or without fittings, made of sisal, hemp and manila 3- and 4-strand laid construction natural fibre ropes and polyamide, polyester and polypropylene 3- and 4-strand laid construction and 8-strand plaited construction man-made fibre ropes having a reference number in the range of 16 to 48 inclusive.

26、 The fibre rope slings covered by this part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or working load limits specified. Lifting operations not covered by thi

27、s standard would include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply. Fibre rope slings conforming to this European Standard are suitable for use and storage in the follow

28、ing temperature ranges: a) polyester and polyamide -40C to 100C, b) manila, sisal, hemp and polypropylene -40C to 80C. This European Standard does not apply to fibre rope sling assemblies rated by the trigonometric method. This European Standard deals with the technical requirements to minimize the

29、hazards listed in clause 4 which can arise during the use of fibre rope slings when carried out in accordance with the instructions and specification given by the manufacturer or authorized representative. 2 Normative references This European Standard incorporates, by dated or undated reference, pro

30、visions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it

31、 by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 696, Fibre ropes for general service Polyamide EN 697, Fibre ropes for general service Polyester EN 698, Fibre ropes for general service Manila and sisal EN 699, Fib

32、re ropes for general service - Polypropylene EN 1050:1996, Safety of machinery Principles of risk assessment EN 1261, Fibre ropes for general service - Hemp EN 1677-1, Components for slings Safety Part 1: Forged steel components, Grade 8 EN 1677-2, Components for slings Safety Part 2: Forged steel l

33、ifting hooks with latch, Grade 8 EN 1677-3, Components for slings Safety Part 3: Forged steel self-locking hooks, Grade 8 EN 1677-4, Components for slings Safety Part 4: Links, Grade 8 EN 1677-5, Components for slings Safety Part 5: Forged steel lifting hooks with latch, Grade 4 BS EN 1492-4:2004+A1

34、:2008EN 1492-4:2004+A1:2008 (E) 6 EN 1677-6, Components for slings Safety Part 6: Links, Grade 4 EN 13411-1, Terminations for steel wire ropes Safety Part 1: Thimbles for steel wire rope slings EN ISO 1968:2004, Fibre ropes and cordage - Terms and definitions (ISO 1968:2004 EN ISO 7500-1:1999, Metal

35、lic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines (ISO 7500-1:1999) EN ISO 12100-2, Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003) 3 Terms and definitions For the purp

36、oses of this European Standard, the terms and definitions given in EN ISO 1968:2004 and the following apply. 3.1 fibre rope sling flexible sling comprising one or more parts of identical fibre rope, terminating in spliced eyes with or without thimbles and fittings, or in the case of an endless sling

37、, joined to itself with a splice 3.2 multi-leg sling fibre rope sling assembly, consisting of two, three or four identical legs attached to a master link 3.3 splice specified method of laying the tail end strands of the rope into the strands of the standing part of the rope to form an eye or join th

38、e ends of the rope together 3.4 soft eye eye made by forming the end of the rope into a loop and by splicing the free end to the standing part 3.5 thimbled or hard eye spliced eye containing a rigid thimble BS EN 1492-4:2004+A1:2008EN 1492-4:2004+A1:2008 (E) 7 3.6 thimble rigid, shaped component for

39、 insertion into an eye for the purpose of protecting the eye from contact damage, abrasion and deformation, see Figure 1 a) Heart shaped b) Reeving Figure 1 Thimble 3.7 fitting loadbearing metal component, designed to be fitted and supplied as part of the sling, so as to permit the sling to be attac

40、hed to other lifting accessories or connected to the load NOTE Thimbles are not included within the term fitting. 3.8 master link link, or link assembly, forming the upper terminal fitting of a multi-leg sling assembly by means of which the sling assembly is attached to the hook of a crane, other li

41、fting machine or accessory 3.9 reference number number quoted in documentation which specifies the mass/metre, breaking force and other parameters of the fibre rope. The reference number corresponds to the approximate diameter in millimetres; minimum breaking force in daN. NOTE See EN 696, 697, 698,

42、 699 and 1261. 3.10 nominal diameter specified diameter of the rope, which is usually used as the reference value for a given product 3.11 nominal length specified length of the sling, inclusive of fittings, from bearing point to bearing point NOTE See figures 2 to 5. 3.12 effective working length (

43、EWL) actual finished length of the fibre rope sling, inclusive of fittings, from bearing point to bearing point BS EN 1492-4:2004+A1:2008EN 1492-4:2004+A1:2008 (E) 8 3.13 coefficient of utilization ratio of the specified tensile strength of the rope to the WLL of the single part of spliced rope, tak

44、ing into account the acceleration due to gravity (9,80665 m/s 2 ) and is equal to 7 NOTE 1 Fittings may have a different coefficient of utilization from that of the rope to which they are connected. NOTE 2 This term has the same meaning as the term working coefficient used in the Machinery Directive

45、. 3.14 Assembly Factor (A) factor used in the calculation of the WLL of the sling assembly that takes into account the assembly of the sling, the number of legs and the inclination angles (), see Figure 10 3.15 Mode Factor (M) factor to be applied by the user to the WLL of a fibre rope sling in orde

46、r to arrive at the maximum load that maybe lifted for a given mode of use 3.16 Working load limit (WLL) maximum mass which a fibre rope sling is designed to sustain in straight pull or at the rated angle, in general service 3.17 competent person designated person, suitably trained and qualified by k

47、nowledge and practical experience, and with the necessary instructions to enable the required tests and examination to be carried out 4 Hazards The accidental release of a load, or release of a load due to failure of a component puts at risk, either directly or indirectly, the safety or health of th

48、ose persons within the danger zone. In order to provide the necessary strength and durability of lifting accessories this part of EN 1492 specifies requirements for the design, manufacture and testing to ensure the specified levels of performance are met. Endurance has not been identified as a hazar

49、d when fibre rope slings having the specified levels of performance given in this part of EN 1492 are used in general lifting service. Since failure can be caused by the incorrect choice of WLL and specification of lifting accessory. This Part of EN 1492 also gives the requirements for marking and the manufacturers certificate. Aspects of safe use associated with good practice are given in annex A (normative) and annex C (informative). Table 1 lists those