EN 12418-2000 en Masonry and stone cutting-off machines for job site - Safety (Incorporates Amendment A1 2009)《施工现场用砖石和石材切断机的安全性 包含修改件A1-2009》.pdf

《EN 12418-2000 en Masonry and stone cutting-off machines for job site - Safety (Incorporates Amendment A1 2009)《施工现场用砖石和石材切断机的安全性 包含修改件A1-2009》.pdf》由会员分享，可在线阅读，更多相关《EN 12418-2000 en Masonry and stone cutting-off machines for job site - Safety (Incorporates Amendment A1 2009)《施工现场用砖石和石材切断机的安全性 包含修改件A1-2009》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、|BRITISH STANDARDBS EN12418:2000+A1:2009ICS 91.220NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWMasonry and stonecutting-off machines forjob site SafetyThis British Standard, havingbeen prepared under thedirection of the SectorCommittee for Building and CivilEngineering was p

2、ublished underthe authority of the StandardsCommittee and comes into effecton 15 August 2000 BSI 2009ISBN 978 0 580 63118 4 BS EN 12418:2000+A1:2009Amendments/corrigenda issued since publicationDate Comments30 June 2009 Implementation of CEN amendment A1:2009National forewordThis British Standard is

3、 the UK implementation of EN 12418:2000+A1:2009.It supersedes BS EN 12418:2000 which will be withdrawn on 30 November 2009.The UK participation in its preparation was entrusted by Technical Committee B/513, Construction equipment and plant, and site safety, to Subcommitte B/513/6,Demolition, cutting

4、, roughening, smoothing and splitting machines Safety.A list of organizations represented on this subcommittee can be obtained on requestto its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application.Complian

5、ce with a British Standard cannot confer immunityfrom legal obligations.The start and finish of text introduced or altered by amendment is indicatedin the text by tags. Tags indicating changes to CEN text carry the number ofthe CEN amendment. For example, text altered by CEN amendment A1 isindicated

6、 by !“. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12418:2000+A1 March 2009 ICS 91.220 Supersedes EN 12418:2000English Version Masonry and stone cutting-off machines for job site - Safety Scies de chantier trononner les matriaux - Scurit Steintrennmaschinen fr den Baustelleneinsatz - Siche

7、rheitThis European Standard was approved by CEN on 3 May 2000 and includes Amendment 1 approved by CEN on 15 February 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wit

8、hout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other languag

9、e made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,

10、 France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMIT

11、EE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12418:2000+A1:2009: EBS EN 12418:2000+A1:2009EN 12418:2000+A1:2009 (E) 2 Contents Page Foreword 3Introduction .

12、41 Scope 42 Normative references 53 Terms and definitions .64 List of significant hazards 95 Safety requirements and/or measures . 115.1 Mechanical hazard 115.2 Electrical hazards . 155.3 Thermal hazards . 155.4 Exhaust fumes (and gas) . 165.5 Fluid containers 165.6 Protection against water splashes

13、 165.7 Rotational speed . 165.8 Noise 175.9 Maintenance 176 Verification of safety requirements and/or measures . 177 Information for use . 177.1 Marking 177.2 Accompanying documents 18Annex A (normative) Noise test code - Grade 2 of accuracy. 22Annex B (normative) Dimensions of the flanges for cutt

14、ing-off diamond wheel 25Annex C (normative) Strength of guards - State of the art concerning the characteristics of guards used with cutting-off wheels 27Annex D (normative) Pictograms . 31Annex E (normative) Verification of surface temperature . 33Annex F (normative) !Vibration test code“ 34Annex Z

15、A (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by 98/79/EC“ 38Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 39Bibliography . 40BS EN 12418:2

16、000+A1:2009EN 12418:2000+A1:2009 (E) 3 Foreword This document (EN 12418:2000+A1:2009) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines - Safety“, the secretariat of which is held by DIN. This European Standard shall be given the status of a n

17、ational standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2009-02-15. This document supersedes EN 12418:

18、2000. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s)

19、. !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ The annex A is normative and contains “Noise test code - Grade 2 of accuracy“, annex B is normative and contains “Dimensions of the flanges for cutting-off diamond wheel“, annex C

20、 is normative and contains “Strength of cutting-off wheel guards “, the annex D is normative and contains “Pictograms“, the annex E is normative and contains “Verification of surface temperature” !, the Annex F is normative and contains “Vibration text code“ and the annex ZA is informative and conta

21、ins “Relationship of this European Standard with EU Directives“; this European Standard also contains a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bu

22、lgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 12418:2000+A1:2009EN 12

23、418:2000+A1:2009 (E) 4 Introduction This European standard is a Type C-standard as stated in !EN ISO 12100-1:2003“. The machinery concerned and the extent to which hazards are covered is indicated in the scope of this standard. 1 Scope This European Standard applies to transportable masonry and ston

24、e cutting-off machines stationary during work, principally used on job site building construction for cutting-off stones, other mineral construction materials and composite materials having at least one supporting surface. The power for the tool rotation is supplied by electrical or internal combust

25、ion prime motor. This European Standard deals with all significant hazards pertinent to masonry and stone cutting-off machines for job site (see clause 4), when they are used as intended and under the conditions foreseen by the manufacturer. This European Standard specifies the appropriate technical

26、 measures to eliminate or reduce risks arising from the significant hazards. These machines are designed for use with rotating diamond cutting-off wheels with a continuous rim and/or segmented rim. This European Standard does not apply to: metal cutting-off machines; wood and timber sawing machines;

27、 machines with a feed or descent mechanism other than manual, or with a pedal; mobile machines on a trolley travelling on the ground; hand-held portable grinding and cutting-off machines; hand-held portable grinding and cutting-off machines mounted on a support to be used in a fixed position. This E

28、uropean Standard does not cover the operation of transportable masonry and stone cutting-off machines in potential explosive atmospheres. This European Standard covers electrical hazards making reference to relevant European Standards (see 5.2). Those hazards that are relevant for all mechanical, el

29、ectrical, hydraulic, pneumatic and other equipment of machinery and that are dealt with in standards for common use are not covered by this European Standard. Reference to pertinent standards of this kind is made where such standards are applicable and so far necessary. In this standard, the masonry

30、 and stone cutting-off machines for job site construction are called: “cutting-off machines“ or “machines“, and cutting-off wheels are also called: “tools“. This standard applies primarily to the machines which are manufactured after the date of approval of the standard by CEN. BS EN 12418:2000+A1:2

31、009EN 12418:2000+A1:2009 (E) 5 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) app

32、lies.“ !deleted text“ !EN 953“, Safety of machinery - General requirements for the design and construction of guards (fixed, movable) !deleted text“ !EN 12096:1997, Mechanical vibration Declaration and verification of vibration emission values“ !EN 13218:2002“, Machine tools Safety Stationary grindi

33、ng machines !EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified)“ !EN 60335-1:2002, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60033-1:2001, modified)“ !EN 60335-2-41:2003, Household

34、 and similar electrical appliances Safety Part 2-41: Particular requirements for pumps (IEC 60335-2-41:2002)“ !EN 61029-1:2000“, Safety of transportable motor operated electric tools Part 1: General requirements (IEC 61029-1:1990, modified) prEN 61029-2-7:1992, Safety of transportable motor operated

35、 electric tools Part 2-7: Particular requirements for diamond saws with water supply !prEN ISO 3744:2006, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO/DIS 3744:

36、2006)“ !EN ISO 5349-2:2001, Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace (ISO 5349-2:2001) EN ISO 8041:2005, Human response to vibration Measuring instrumentation (ISO 8041:2005)“ EN ISO 11

37、201:1995, !Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995)“ !EN ISO 12100-1:2003, Safety of machinery Basic con

38、cepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) EN ISO 13732-1:2008, Ergonomics of the thermal environment Methods for

39、 the assessment of human responses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1:2006) EN ISO 13857:2008, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) BS EN 12418:2000+A1:2009EN 12418:2000+A1:2009 (E) 6 EN ISO 20643

40、:2008, Mechanical vibration Hand-held and hand-guided machinery Principles for evaluation of vibration emission (ISO 20643:2005) ISO 5348:1998, Mechanical vibration and shock Mechanical mounting of accelerometers ISO 7000:2004, Graphical symbols for use on equipment Index and synopsis ISO 16063-1:19

41、98, Methods for the calibration of vibration and shock transducers Part 1: Basic concepts“ 3 Terms and definitions For the purposes of this Standard the terms and definitions stated in !EN ISO 12100-1:2003“ apply. Additional terms and definitions specifically needed for this Standard are added below

42、. 3.1 cutting-off machine transportable machine used in building and site construction, operating at a stationary position and is intended for cutting primarily construction material of different weight, shape and dimensions, for example natural stone, concrete (reinforced or otherwise), bricks, con

43、crete blocks (breeze blocks), paving slabs or cobblestones, roof tiles and ceramic tiles. The feed of the material or of the table where it is placed is made by hand. The cutting head, if movable, is moved manually or by a pedal. The power source of a cutting-off machine is an electrical motor or an

44、 internal combustion engine with built-in tank. 3.2 types of cutting-off machines cutting-off machines can be basically classified in four different types defined below: Type 1: Machine with a movable table having a fixed (permanently or by means of clamps) or swinging moveable cutting head (tiltabl

45、e or not) which is located over the table; Type 2: Machine with a fixed table having a horizontal moving cutting head and, if applicable, vertically adjustable and tiltable cutting head located over the table; Type 3: Machine with a fixed table having a vertically moving cutting head; Type 4: Machin

46、e with a fixed or movable and/or inclinable table having a fixed cutting head, and only intended for use with continuous rim tools having a maximum diameter of 250 mm. The motor is located under the table BS EN 12418:2000+A1:2009EN 12418:2000+A1:2009 (E) 7 Figure 1 Sketches of the different types of

47、 cutting-off machines BS EN 12418:2000+A1:2009EN 12418:2000+A1:2009 (E) 8 3.3 parts of a cutting-off machine cutting-off machine comprising the following parts: frame; electric motor or an ICE (internal combustion engine) to drive the cutting-off wheel in rotation; cutting head; rotating cutting-off

48、 wheel (see clause 1); material-carrying table (movable and/or tiltable or not); cutting-off wheel guard; self containing water tank with an electrical or mechanical water pump or an alternative water supply See also figure 2. Cutting-off machine with internal combustion engine Cutting-off machine with electric motor 1 frame (incorporating the water tank) 2 legs (demountable or otherwise) 3 cutting head 4 cutting-off wheel 5 electric motor (or engine) 6 handle for moving the cutting head 7 foot pedal for lowering the cutting head (if any) 8 cutting-of