EN 12312-8-2005 en Aircraft ground support equipment - Specific requirements - Part 8 Maintenance stairs and platforms (Incorporates Amendment A1 2009)《航空地面辅助设备 特殊要求 第8部分 楼梯和平台 包含修.pdf

《EN 12312-8-2005 en Aircraft ground support equipment - Specific requirements - Part 8 Maintenance stairs and platforms (Incorporates Amendment A1 2009)《航空地面辅助设备 特殊要求 第8部分 楼梯和平台 包含修.pdf》由会员分享，可在线阅读，更多相关《EN 12312-8-2005 en Aircraft ground support equipment - Specific requirements - Part 8 Maintenance stairs and platforms (Incorporates Amendment A1 2009)《航空地面辅助设备 特殊要求 第8部分 楼梯和平台 包含修.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDAircraft ground support equipment Specificrequirements Part 8: Maintenance stairs and platformsICS 49.100g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g4

2、4g42g43g55g3g47g36g58BS EN 12312-8:2005+A1:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 8 July 2005 BSI 2009National forewordThis British Standard is the UK implementation of EN 12312-8:2005+A1:2009. It supersedes BS EN 12312-8:2005, w

3、hich is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by a b.The UK participation in its preparation was

4、 entrusted to Technical Committee ACE/57, Air cargo and ground support equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its co

5、rrect application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationISBN 978 0 580 61077 6Date Comments June 2009 Implementation of CEN amendment A1:2009BS EN 12312-8:2005+A1:200930EUROPEAN STANDARD NORME EUROPENNE EUROPISC

6、HE NORM EN 12312-8:2005+A1 April 2009 ICS 49.100 Supersedes EN 12312-8:2005English Version Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms Matriel au sol pour aronefs - Exigences particulires - Partie 8: Escabeaux et plate-formes de maintenance Lu

7、ftfahrt-Bodengerte - Besondere Anforderungen - Teil 8: Wartungstreppen und -bhnen This European Standard was approved by CEN on 25 March 2005 and includes Amendment 1 approved by CEN on 1 March 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condit

8、ions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three

9、 official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Au

10、stria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN CO

11、MMITTEE FOR STANDARDIZATION C O M I T E U R O P E N D E N O R M A LI S A T I O N EUR OP IS C HES KOM ITEE FR NOR M UNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12312-

12、8:2005+A1:2009: EEN 12312-8:2005+A1:2009 (E) 2 Contents Page Foreword 3g3Introduction . 4g31g3 Scope 5g32g3 Normative references 5g33g3 Terms and definitions . 6g34g3 List of hazards 7g35g3 Safety requirements and/or measures 7g35.1g3 General requirements 7g35.2g3 Stair flight . 8g35.3g3 Platforms 8

13、g35.4g3 Guard rails 9g35.5g3 Lifting devices 9g35.6g3 Controls, monitoring devices and displays 9g35.7g3 Auxiliary means for powered maintenance stairs and platforms . 9g36g3 Information for use 10g36.1g3 Marking . 10g36.2g3 Additional marking 10g36.3g3 Warnings . 10g36.4g3 Instructions 10g37g3 Veri

14、fication of requirements . 11g3Annex A (informative) Examples of typical maintenance stairs and platforms 12g3Annex B (normative) List of hazards in addition to those of EN 1915-1 13g3Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98

15、/37/EC, amended by Directive 98/79/EC 15g3Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 16g3Bibliography 17g3BS EN 12312-8:2005+A1:2009 EN 12312-8:2005+A1:2009 (E) 3 Foreword This document (EN 12312-8:2005+A1:2009) ha

16、s been prepared by Technical Committee CEN/TC 274 “Aircraft ground support equipment“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and co

17、nflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2009-03-01. This document supersedes EN 12312-8:2005. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This docu

18、ment has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). !For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this docu-ment.“ The Par

19、ts of EN 12312 Aircraft ground support equipment Specific requirements are: Part 1: Passenger stairs Part 2: Catering vehicles Part 3: Conveyor belt vehicles Part 4: Passenger boarding bridges Part 5: Aircraft fuelling equipment Part 6: Deicers and deicing/antiicing equipment Part 7: Aircraft moveme

20、nt equipment Part 8: Maintenance stairs and platforms Part 9: Container/Pallet loaders Part 10: Container/Pallet transfer transporters Part 11: Container/Pallet dollies and loose load trailers Part 12: Potable water service equipment Part 13: Lavatory service equipment Part 14: Disabled/Incapacitate

21、d passenger boarding equipment Part 15: Baggage and equipment tractors Part 16: Air start equipment Part 17: Air conditioning equipment Part 18: Nitrogen or Oxygen units Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions Part 20: Ground power equipment This European Standard includes

22、a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-tries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland

23、, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 12312-8:2005+A1:2009 EN 12312-8:2005+A1:2009 (E) 4 Introduction This European Standard specifies health and safety requirem

24、ents, as well as some functional and performance requirements for maintenance stairs and platforms including a built-in source of power (see Clause 1, Scope) intended for maintenance purposes on all aircraft types commonly in service in civil air transport. The minimum essential criteria are conside

25、red to be of primary importance in providing safe, serviceable, economical and practical maintenance stairs and platforms. Deviations from the recommended criteria should occur only after careful consideration, extensive testing, risk assessment and thorough service evaluation have shown alternative

26、 methods or conditions to be satisfactory. This European Standard is a Type C standard as stated in !EN ISO 12100“. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standar

27、d different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. BS EN 12312-8:2005+A1:2009 EN 12312

28、-8:2005+A1:2009 (E) 5 1 Scope This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of maintenance stairs and platforms when carried out in accordance with the specifications given by

29、 the manufacturer or his authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and maintenance and handling agencies. This European Standard applies to:

30、 self-propelled maintenance stairs and platforms; towable maintenance stairs and platforms equipped with powered means, e.g. for height adjustment, stabi-lizers, designed for aircraft maintenance purposes including access to the aircraft (Examples see Annex A). NOTE 1 Powered should be also understo

31、od as manual effort stored in springs or hydraulic accumulators, etc., the danger-ous action of which can be produced or can continue after the manual effort has ceased or directly applied manual effort for lifting or lowering loads. NOTE 2 Those clauses of this European Standard that can apply may

32、also be used as a guideline for the design of towable maintenance stairs and platforms without powered means. This European Standard does not apply to: maintenance docks either fixed to the ground or moveable only for docking procedure. This European Standard does not establish requirements for nois

33、e and vibration. Noise and vibration are dealt with respectively in EN 1915-4 and EN 1915-3. This European Standard does not deal with hazards in respect to a standard automotive chassis and from other vehicles on the apron. This Part of EN 12312 is not applicable to maintenance stairs and platforms

34、 which are manufactured before the date of publication of this standard by CEN. !This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehi-cles) and EN 1915-4.“ 2 Normative references The following referenced documents are indispensable for the applic

35、ation of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text“ EN 1050:1996, Safety of machinery Principles for risk assessment EN 1175-1, Safety of industrial truc

36、ks Electrical requirements Part 1: General requirements for battery pow-ered trucks EN 1386, Aluminium and aluminium alloys Tread plate Specifications EN 1837, Safety of machinery Integral lighting of machines BS EN 12312-8:2005+A1:2009 EN 12312-8:2005+A1:2009 (E) 6 EN 1915-1:2001, Aircraft ground s

37、upport equipment General requirements Part 1: Basic safety requirements EN 1915-2, Aircraft ground support equipment General requirements Part 2: Stability and strength requirements, calculations and test methods !EN 1915-3, Aircraft ground support equipment General requirements Part 3: Vibration me

38、asurement methods and reduction EN 1915-4, Aircraft ground support equipment General requirements Part 4: Noise measurement methods and reduction“ EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic termi-nology, methodology (ISO 12100-1:2003) EN ISO

39、12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) !EN ISO 13850:2008, Safety of machinery Emergency stop Principles for design (ISO 13850:2006)“ 3 Terms and definitions For the purposes of this European Standard, the terms

40、 and definitions given in EN ISO 12100:2003 and EN 1915-1:2001 and the following apply. 3.1 maintenance stair stair designed for: entering and leaving the aircraft for maintenance purposes; reaching and/or access to elevated parts of the aircraft; carrying out maintenance work on aircraft 3.2 mainte

41、nance platform elevating work platform designed for: reaching and/or access to elevated parts of the aircraft; carrying out maintenance work on aircraft 3.3 maintenance dock installed assembly, either fixed to the ground or moveable only for the docking procedure, designed for: reaching elevated par

42、ts of the aircraft; carrying out maintenance work on defined aircraft types 3.4 stair flight series of steps between ground level and platform or between two platforms 3.5 riser height (R) distance between the surface of the tread of one step and the surface of a step above or below when measured pe

43、rpendicularly between the tread surfaces BS EN 12312-8:2005+A1:2009 EN 12312-8:2005+A1:2009 (E) 7 3.6 tread depth (T) distance from one step nosing to the adjacent step nosing when measured parallel to the tread surface 3.7 step width maximum usable width measured along the nose of the step 3.8 hand

44、rail height distance to the top surface of the handrail as measured at the nose of the step or platform and perpendicular to the tread surface 3.9 incline angle of stair flight to a horizontal plane, measured across the noses of the steps 3.10 inclination angle of platform and steps to a horizontal

45、plane, measured at a right angle to the noses of the steps 4 List of hazards The list of risks and hazards (see Annex B) is based on EN 1050 and contains the hazards and hazardous situa-tions, as far as they are dealt with in this document, identified by risk assessment as significant for maintenanc

46、e stairs and platforms and which require action to eliminate or reduce risks. 5 Safety requirements and/or measures 5.1 General requirements 5.1.1 !Maintenance stairs and platforms shall conform to the relevant requirements of EN 1915-1, EN 1915-2, EN 1915-3 and EN 1915-4 unless otherwise specified

47、in this standard.“ They shall also conform to the specific requirements of this European Standard. 5.1.2 Strength calculations shall be carried out in accordance with EN 1915-2. 5.1.3 Stability calculations shall be carried out according to EN 1915-2. For maintenance stairs and platforms intended on

48、ly for indoor use, the stability calculation may be carried out with-out regard to wind and snow loads. NOTE For special purposes the wind speed used for stability calculation may be different from 20,58 m/s (40 knots; see Clause 0 of EN 1915-1:2001-negotiations) 5.1.4 Self-propelled maintenance sta

49、irs and platforms shall be equipped with driver accommodation. NOTE This clause is not valid for pedestrian controlled self-propelled maintenance stairs and platforms. 5.1.5 Parking brakes or equivalent devices of maintenance stairs and platforms shall be dimensioned so as to take into account the forces induced during work under intended use conditions in accordance with EN 1915-1:2001, 5.7.2, requirement to hold on a slope of at least 7 %. 5.1.6 Deviating from the requirements of EN 1915-1 lights and reflect