DLA SMD-5962-89553 REV B-2012 MICROCIRCUITS DIGITAL BIPOLAR ADVANCED SCHOTTKY TTL OCTAL BUS TRANSCEIVERS MONOLITHIC SILICON.pdf

《DLA SMD-5962-89553 REV B-2012 MICROCIRCUITS DIGITAL BIPOLAR ADVANCED SCHOTTKY TTL OCTAL BUS TRANSCEIVERS MONOLITHIC SILICON.pdf》由会员分享，可在线阅读，更多相关《DLA SMD-5962-89553 REV B-2012 MICROCIRCUITS DIGITAL BIPOLAR ADVANCED SCHOTTKY TTL OCTAL BUS TRANSCEIVERS MONOLITHIC SILICON.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Update to reflect latest changes in format and requirements. Editorial changes throughout. -les 05-02-28 Raymond Monnin B Update drawing as part of 5 year review. -jt 12-03-01 C. SAFFLE THE ORIGINAL FIRST PAGE OF THIS DRAWING HAS BEEN REPLACED. R

2、EV SHEET REV SHEET REV STATUS REV B B B B B B B B B B OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 PMIC N/A PREPARED BY Tim H. Noh DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.Landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES

3、 OF THE DEPARTMENT OF DEFENSE CHECKED BY Raymond Monnin APPROVED BY Michael A. Frye MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, OCTAL BUS TRANSCEIVERS, MONOLITHIC SILICON DRAWING APPROVAL DATE 89-02-01 AMSC N/A REVISION LEVEL B SIZE A CAGE CODE 67268 5962-89553 SHEET 1 OF 10 DSCC FORM 22

4、33 APR 97 5962-E205-12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89553 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing des

5、cribes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 5962-89553 01 R X Drawing number Device type (see 1.2.1) Case outline (

6、see 1.2.2) Lead finish (see 1.2.3) 1.2.1 Device type. The device type identify the circuit function as follows: Device type Generic number Circuit function 01 54AS640 Octal bus transceivers with three-state outputs 1.2.2 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follo

7、ws: Outline letter Descriptive designator Terminals Package style R GDIP1-T20 or CDIP2-T20 20 dual-in-line S GDFP2-F20 or CDFP3-F20 20 flat 2 CQCC1-N20 20 square chip carrier 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage

8、 range . -0.5 V dc minimum to +7.0 V dc maximum Input voltage range: VCCall inputs 0.0 V dc to +7.0 V dc VCCI/O ports. 0.0 V dc to +5.5 V dc Storage temperature range . -65C to +150C Continuous power dissipation (PD) 1/ . 676 mW Lead temperature (soldering, 10 seconds) . +300C Thermal resistance, ju

9、nction-to-case (JC) . See MIL-STD-1835 Junction temperature (TJ) +175C 1.4 Recommended operating conditions. Supply voltage (VCC) . +4.5 V dc minimum to +5.5 V dc maximum Minimum high level input voltage (VIH) . 2.0 V dc Maximum low level input voltage (VIL) 0.8 V dc Maximum high level output curren

10、t (IOH) -12 mA Maximum low level output current (IOL) 48 mA Case operating temperature range (TC) -55C to +125C _ 1/ Continuous power dissipation is defined as VCCx ICC, and must withstand the added PDdue to short-circuit test; e.g., IOS. Provided by IHSNot for ResaleNo reproduction or networking pe

11、rmitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING BULLETIN DATE: 12-03-01 Approved sources of supply for SMD 5962-89553 are listed below for immediate acquisition information only and shall be added to MIL-HDBK-103 and QML-38535 during the next revision. MIL-HDBK-103 and QML-38535 w

12、ill be revised to include the addition or deletion of sources. The vendors listed below have agreed to this drawing and a certificate of compliance has been submitted to and accepted by DLA Land and Maritime -VA. This information bulletin is superseded by the next dated revision of MIL-HDBK-103 and

13、QML-38535. DLA Land and Maritime maintains an online database of all current sources of supply at http:/www.Landandmaritime.dla.mil/Programs/Smcr/. Standard microcircuit drawing PIN 1/ Vendor CAGE number Vendor similar PIN 2/ 5962-8955301RA 01295 SNJ54AS640J 5962-8955301SA 01295 SNJ54AS640W 5962-895

14、53012A 01295 SNJ54AS640FK 1/ The lead finish shown for each PIN representing a hermetic package is the most readily available from the manufacturer listed for that part. If the desired lead finish is not listed contact the vendor to determine its availability. 2/ Caution. Do not use this number for

15、item acquisition. Items acquired to this number may not satisfy the performance requirements of this drawing. Vendor CAGE Vendor name number and address 01295 Texas Instruments, Inc. Semiconductor Group 8505 Forest Ln. PO Box 660199 Dallas, TX 75243 The information contained herein is disseminated for convenience only and the Government assumes no liability whatsoever for any inaccuracies in the information bulletin. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-