DLA MS51515 REV A (1)-1998 TEE TUBE BULKHEAD ON BRANCH 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式三岔管 舱壁转移》.pdf

《DLA MS51515 REV A (1)-1998 TEE TUBE BULKHEAD ON BRANCH 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式三岔管 舱壁转移》.pdf》由会员分享，可在线阅读，更多相关《DLA MS51515 REV A (1)-1998 TEE TUBE BULKHEAD ON BRANCH 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式三岔管 舱壁转移》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 MS51515 REV A (3) = 9999932 0090373 02T I INCH-POUND I MS51515A AMENDMENT 1 9 April 1998 MILITARY STANDARD TEE, TUBE, BULKHEAD ON BRANCH, 37 DEGREE FLARED This amendment forms a part of MS51515A, dated 17 January 1979, and is approved for use by all Departments and Agencies of the Department of Def

2、ense. PAGE 1 NOTES: Add new note as follows: “9. MS51515A parts shall not be supplied with the undercut, as defined by dimension GI , on the bulkhead end of the fitting.” Parts manufactured prior to the date of this amendment are acceptable for use until exhausted. Custodians: Amy - AR Navy - OS Pre

3、paring Activity: DIA - CC (Project 4730-0832) Review Activities: Army - AT, CR-4 Navy - MC, YD-I AMSC NIA I of 1 FSC 4730 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-