DLA MS51506 REV B-1988 FITTINGS HYDRAULIC TUBE FLARED 37 DEGREE AND FLARELESS STEEL ELBOW PIPE TO TUBE 90 DEGREE FEMALE PIPE END 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J5.pdf

《DLA MS51506 REV B-1988 FITTINGS HYDRAULIC TUBE FLARED 37 DEGREE AND FLARELESS STEEL ELBOW PIPE TO TUBE 90 DEGREE FEMALE PIPE END 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J5.pdf》由会员分享，可在线阅读，更多相关《DLA MS51506 REV B-1988 FITTINGS HYDRAULIC TUBE FLARED 37 DEGREE AND FLARELESS STEEL ELBOW PIPE TO TUBE 90 DEGREE FEMALE PIPE END 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J5.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、MS51506 REV B q7 9999912 0010961 4 E MS5 1506B 16 supERs.EDINS FEBRUAFE 1988 MS51506A 17 January 1979 MILITARY SPECIFICATION SHEET FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED This specification is approved for use

2、 by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Defense Index of Specifications and Standards (D

3、oDISS) specified in the solicitation: MIL-F-18866. rNUT- MC51531 AMSC N/A 1 of 3 DISTRIBUTION . STATEMENT A: Approved for public release; distribution is FSC 4730 unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MSSL506 REV B L17 = 9999912

4、0030962 6 *Not recomnended f6r new design REQUIREMENTS : 1. -: Steel, carbon in accordance with procurement specification. Steel, corrosion-resisting in accordance with procurement specifica- tion. 2. -TIVE C-: Cadmium plated in accordance with procurement specifica- tion. Zinc plated in accordance

5、with procurement specifi- cation. Phosphate coated in accordance with procurement specification. Passivation treatment in accordance with procurement specification. 3. TO1.W: Dimensions and tolerances not shown shall be in accordance with the SAE Standard for 37 Degree Flared Fittings (SAE 5514). 4.

6、 m: Threads shall be in accordance with Screw-Thread Standards for The MS part number consists of the MS number plus the dash number. Federal Services, FED-STD-H28. 5. -NUMBER: a. For body only, cadmium plated, use the MS number, plus the body dash number. Example: MS51506B2. 2 Provided by IHSNot fo

7、r ResaleNo reproduction or networking permitted without license from IHS-,-,-6. 7. 8. 9. MS5150b REV B 47 9777912 0010763 A MS5 1 5 O 6B b. For complete assembly (with nut and sleeve), cadmium plated, use the MS number, plus the assembly dash number. Example: MS5 15062. For zinc coating add (Z) to t

8、he dash number. MS51506B2Z or MS51506A2Z. c. Example: d. For phosphate coating add (P) to the dash number. MS51506B2P or MS5 l506A2P. Example: e. For corrosion-resisting steel add (S) to the dash number. Example: MS51506B2S or MS51506BA2S. The illustration is for identification purposes only and is

9、not intended to restrict designs or shapes not dimensioned. After 17 January 1979 bodies will be used for production only and u be stocked for maintenance. depleted. In the event of a conflict between the text of this Military Specification Sheet and the reference cited herein, the text of this Mili

10、tary Specification Sheet shall take precedence. Referenced Government (or non-Government) documents of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation form a part of this Military Specifica- tion Sheet to the ex

11、tent specified herein. Existing stock of bodies should be used until CUSTODIAN: NAVY - OS AIR FORCE - 99 REVIEW ACTIVITIES: AIR FORCE - 82 ARMY - ER, ME DLA-CS USER ACTIVITIES: ARMY - AT NAVY - MC, YD PREPARING ACTIVITY: ARMY - AR AGENT: DU-CS (PROJECT 4730-0909) *U.S GOVERNMENT PRINTING OFFICE 1988 - 505-033/91957 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-