DLA MIL-PRF-20 36 G-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING) ESTABLISHED AND NON-ESTABLISHED RELIABILITY STYLES CCR06 AND CC06.pdf

《DLA MIL-PRF-20 36 G-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING) ESTABLISHED AND NON-ESTABLISHED RELIABILITY STYLES CCR06 AND CC06.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-PRF-20 36 G-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING) ESTABLISHED AND NON-ESTABLISHED RELIABILITY STYLES CCR06 AND CC06.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 5910 MIL-PRF-20/36G 21 April 2011 SUPERSEDING MIL-PRF-20/36F 21 June 2001 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING), ESTABLISHED AND NON-ESTABLISHED RELIABILITY, STYLES CCR06 AND CC06 This specification is approved for use by all De

2、partments and Agencies of the Department of Defense. The requirements for acquiring the capacitors described herein shall consist of this specification sheet and MIL-PRF-20. FIGURE 1. Styles CCR06 and CC06 capacitors. INCH-POUND Style CC06 is inactive for new design after 19 September 1983. Use CCR0

3、6. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-20/36G 2 OPTIONAL CONFIGURATION WITH STANDOFFS (CCR06 ONLY) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Lead diameter shall be .023 (0.58 mm)

4、to .029 (0.74 mm). 4. Optional standoffs for style CCR06 shall be of triangular shape so that the standoffs will provide line contact with surface upon which the capacitor is mounted. The shape of the triangle is optional. 5. Thickness of standoffs shall be .075 (1.90 mm) to the body thickness. 6. L

5、ead length may be a minimum of .625 (15.88 mm) for use in tape and reel automatic insertion equipment, when specified. 7. At the option of the user, the standoff configuration may be furnished as a replacement for the nonstandoff configuration of the same style. FIGURE 1. Styles CCR06 and CC06 capac

6、itors - Continued. Inches mm .010 0.25 .015 0.38 .026 0.66 .045 1.14 .090 2.29 .100 2.54 .200 5.08 .290 7.37 1.250 31.80 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-20/36G 3 REQUIREMENTS: Dimensions and configuration: see figure 1. Lead t

7、ype: Radial. Case type: Molded. DC rated voltage: See table I. Operating temperature range: -55C to +125C. Characteristic: CG. Failure rate level (CCR06 only): M (1.0 percent), P (0.1 percent), R (.01 percent) or S (.001 percent). Thermal shock and voltage conditioning (CCR06 only): In accordance wi

8、th MIL-PRF-20. Capacitance: Within tolerance specified (see table I). Dissipation factor: In accordance with MIL-PRF-20. TABLE I. Capacitor characteristics. PIN 1/ Rated voltage (volts, dc) Nominal capacitance (pF) Capacitance tolerance PIN 1/ Rated voltage (volts, dc) Nominal capacitance (pF) Capac

9、itance tolerance CC-06CG361- CC-06CG391- CC-06CG431- CC-06CG471- CC-06CG511- CC-06CG561- CC-06CG621- CC-06CG681- CC-06CG751- CC-06CG821- CC-06CG911- CC-06CG102- CC-06CG112- CC-06CG122- CC-06CG132- CC-06CG152- CC-06CG162- CC-06CG182- CC-06CG202- CC-06CG222- 200 200 200 200 200 200 200 200 200 200 200

10、 200 200 200 200 200 200 200 100 100 360 390 430 470 510 560 620 680 750 820 910 1,000 1,100 1,200 1,300 1,500 1,600 1,800 2,000 2,200 FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ CC-06CG242- CC-06CG272- CC-06CG302- CC-06CG332- CC-06CG362- CC-06CG392- CC-06CG432- C

11、C-06CG472- CC-06CG512- CC-06CG562- CC-06CG622- CC-06CG682- CC-06CG752- CC-06CG822- CC-06CG912- CC-06CG103- CC-06CG123- CC-06CG153- CC-06CG183- 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 2,400 2,700 3,000 3,300 3,600 3,900 4,300 4,700 5,100 5,600 6,200 6,800 7,500 8,200 9,100 10

12、,000 12,000 15,000 18,000 FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJK FGJK FGJK FGJK FGJK FGJK FGJK FGJK FGJK FGJK FGJK 1/ Complete PIN will include the following: 1st dash - Symbol “R” (for style CCR06) or dash will be deleted (for style CC06). 2nd dash - Applicable capacitance tolerance symbol. 3rd dash

13、- Applicable failure rate level symbol (CCR06 only) or dash will be deleted (for style CC06). 4th dash - Symbol “V” for standoffs CCR06 only) or dash will be deleted (for style CCR06 without standoffs and style CC06). Provided by IHSNot for ResaleNo reproduction or networking permitted without licen

14、se from IHS-,-,-MIL-PRF-20/36G 4 Dielectric withstanding voltage: In accordance with MIL-PRF-20. Body insulation: Test II. Solderability: The leads shall be solderable up to .020 inch (0.51 mm) from the body egress. Resistance to soldering heat: In accordance with MIL-PRF-20. Workmanship: For style

15、CCR06 with standoff, exposed copper or bare leads shall be permitted to a maximum of .020 inch (0.51 mm) from the body egress. For style CCR06 without standoffs and style CC06, workmanship shall be in accordance with MIL-PRF-20. Life: In accordance with MIL-PRF-20, operating condition 2. Part or Ide

16、ntifying Number (PIN): In accordance with MIL-PRF-20 and table I. Marking: Method I of MIL-STD-1285. At the option of the manufacturer, the marking may be placed on one side of the capacitor, or the marking may be placed on two lines as long as it is in the same order as shown in the following examp

17、les: ER NON-ER FRONT WITHOUT STANDOFFS BACK FRONT BACK DATE & DATE & LOT CODE LOT CODE CAGE CAGE PIN “J” BRAND PIN LOT CODE & VOLTAGE FRONT WITH STANDOFFS PIN Referenced documents. In addition to MIL-PRF-20, this specification sheet references the following document: MIL-STD-1285 Changes from previo

18、us issue: The margins of this specification sheet are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are ca

19、utioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. CCR06 CG242 FM 1120A J200V 12345 CC06 CG 242F 1120A CG 12345 CCR06 CG242 FMV Provided by IHSNot for ResaleNo reproduction or networkin

20、g permitted without license from IHS-,-,-MIL-PRF-20/36G 5 Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5910-2011-017) DLA - CC Review activities: Navy - AS, MC, OS, SH Air Force - 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-