DIN EN 295-2-2013 Vitrified clay pipe systems for drains and sewers - Part 2 Evaluation of conformity and sampling German version EN 295-2 2013《排水排污用陶土管道系统 第2部分 合格和取样评价 德文版本EN 295-.pdf

《DIN EN 295-2-2013 Vitrified clay pipe systems for drains and sewers - Part 2 Evaluation of conformity and sampling German version EN 295-2 2013《排水排污用陶土管道系统 第2部分 合格和取样评价 德文版本EN 295-.pdf》由会员分享，可在线阅读，更多相关《DIN EN 295-2-2013 Vitrified clay pipe systems for drains and sewers - Part 2 Evaluation of conformity and sampling German version EN 295-2 2013《排水排污用陶土管道系统 第2部分 合格和取样评价 德文版本EN 295-.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、May 2013 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 93

2、.030!%$*Y“2010754www.din.deDDIN EN 295-2Vitrified clay pipe systems for drains and sewers Part 2: Evaluation of conformity and sampling;English version EN 295-2:2013,English translation of DIN EN 295-2:2013-05Steinzeugrohrsysteme fr Abwasserleitungen und -kanle Teil 2: Bewertung der Konformitt und P

3、robenahme;Englische Fassung EN 295-2:2013,Englische bersetzung von DIN EN 295-2:2013-05Systmes de tuyaux en grs vitrifi pour les collecteurs dassainissement et lesbranchements Partie 2: Evaluation de la conformit et chantillonnage;Version anglaise EN 295-2:2013,Traduction anglaise de DIN EN 295-2:20

4、13-05Supersedes DIN EN 295-2:1999-05;together with DIN EN 295-1:2013-05, DIN EN 295-4:2013-05, DIN EN 295-5:2013-05, DIN EN 295-6:2013-05and DIN EN 295-7:2013-05 supersedes DIN EN 295-10:2005-05Supersedes: see belowwww.beuth.deDocument comprises 42 pagesIn case of doubt, the German-language original

5、 shall be considered authoritative.04.13DIN EN 295-2:2013-05 2 A comma is used as the decimal marker. Start of application It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European

6、Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. National foreword This document (EN 295-2:2013) has been prepared b

7、y Technical Committee CEN/TC 165 “Waste water engineering” (Secretariat: DIN, Germany). The preliminary work was done by Working Group WG 2 “Vitrified clay pipes”. The responsible German body involved in its preparation was the Normenausschuss Wasserwesen (Water Practice Standards Committee), Workin

8、g Committee NA 119-05-07 AA Steinzeugrohre. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 2859-1 DIN ISO 2859-1 ISO 3951 (all parts) DIN ISO 3951 (all parts) Amendments This standard differs from DIN EN 295-2:1999-05 and DIN EN 295-10

9、:2005-05 as follows: a) clauses on the evaluation of conformity have been revised in accordance with the framework given by CEN; b) requirements for the resistance to high pressure water jetting have been added; c) requirements for water absorption have been added. Previous editions DIN 1203 to DIN

10、1206: 1926-01 DIN 1230: 1938-07, 1941-04, 1943-09 DIN 1230-2: 1958-02, 1962-07, 1972-01, 1979-09, 1986-01 DIN 1230-7: 1983-08 DIN 1230-202: 1991-03 DIN EN 295-2: 1991-11, 1999-05 DIN EN 295-10: 2005-05 DIN EN 295-2:2013-05 3 National Annex NA (informative) Bibliography DIN ISO 2859-1, Sampling proce

11、dures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection DIN ISO 3951 (all parts), Sampling procedures for inspection by variables DIN EN 295-2:2013-05 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISC

12、HE NORM EN 295-2 February 2013 ICS 93.030 Supersedes EN 295-10:2005, EN 295-2:1991English Version Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling Systmes de tuyaux en grs vitrifi pour les collecteurs dassainissement e t les b r a n c h e m e n ts - P

13、artie 2: Evaluation de la conformit et chantillonnage Steinzeugrohrsysteme fr Abwasserleitungen und -kanle -Teil 2: Bewertung der Konformitt und Probenahme This European Standard was approved by CEN on 1 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which s

14、tipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Europe

15、an Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are

16、the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Roma

17、nia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means r

18、eserved worldwide for CEN national Members. Ref. No. EN 295-2:2013: EEN 295-2:2013 (E) 2 Contents Page Foreword . 3 1 Scope 4 2 Normative references . 4 3 Terms and definitions 5 4 Abbreviations . 5 5 Evaluation of conformity 5 5.1 General . 5 5.2 Initial type testing (ITT) and type testing (TT) . 6

19、 5.2.1 General . 6 5.2.2 Sampling procedure . 6 5.2.3 Test reports 11 5.3 Factory production control (FPC) 12 5.3.1 General . 12 5.3.2 Requirements . 12 5.3.3 Equipment 13 5.3.4 Raw materials and components 13 5.3.5 Product testing and evaluation . 13 5.3.6 Change in batch condition . 14 5.3.7 Recor

20、ds 14 5.3.8 FPC testing of pipes, special fittings, adaptors and compatible accessories manholes and inspection chambers, perforated pipes and jacking pipes 14 5.3.9 FPC testing of fittings according to EN 295-1:2013 and EN 295-5:2013 19 5.3.10 FPC testing of joint assemblies according to EN 295-1:2

21、013 23 5.3.11 FPC of polyurethane sealing elements according to EN 295-1:2013, 6.1.2 . 23 5.3.12 FPC Testing of polypropylene sleeve couplings according to EN 295-1:2013, 6.1.3 24 5.3.13 FPC of rigid fairing materials according to EN 295-1:2013, 6.1.4 . 26 5.3.14 FPC testing of adaptors and connecto

22、rs to EN 295-4:2013, 5.7 . 26 5.3.15 FPC testing of metal banded flexible couplings and adaptors according to EN 295-4:2013, Annex A 27 5.3.16 FPC testing of connectors, insertable fittings and sealing rings for cut pipes for making connections to existing pipelines, manholes or building works accor

23、ding to EN 295-4:2013, Annex B . 28 5.3.17 FPC testing of heatshrinkable sleeves according to EN 295-4:2013, Annex C . 28 5.3.18 FPC testing of watertightness of manholes and inspection chambers . 29 5.3.19 FPC testing of compressive strength of jacking pipes according to EN 295-7:2013 29 5.3.20 FPC

24、 testing of joint assemblies of jacking pipes according to EN 295-7:2013 . 29 Annex A (normative) Acceptability determination and switching rules . 31 A.1 General . 31 A.2 Inspection by attributes . 31 A.2.1 Acceptability determination . 31 A.2.2 Operation of switching rules . 32 A.2.3 Tightened ins

25、pection for rejected batches . 32 A.3 Inspection by variables 32 A.3.1 Distribution . 32 A.3.2 Acceptability determination . 33 A.3.3 Operation of switching rules . 33 Bibliography 38 DIN EN 295-2:2013-05 EN 295-2:2013 (E) 3 Foreword This document (EN 295-2:2013) has been prepared by Technical Commi

26、ttee CEN/TC 165 “Wastewater engineering”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2013, and conflicting national standards shall be withdraw

27、n at the latest by August 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 295-2:1991 and together wi

28、th EN 295-1:2013, EN 295-4:2013, EN 295-5:2013, EN 295-6:2013 and EN 295-7:2013 it supersedes EN 295-10:2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. The main changes with respect to the previous edition are lis

29、ted below: clauses on Evaluation of conformity revised in accordance with the framework given by the CEN Construction sector; requirements for the resistance to high pressure water jetting added; requirements for water absorption added. The standard series EN 295 “Vitrified clay pipe systems for dra

30、ins and sewers“ consists of the following parts: Part 1: Requirements for pipes, fittings and joints Part 2: Evaluation of conformity and sampling (the present document) Part 3: Test methods Part 4: Requirements for adaptors, connectors and flexible couplings Part 5: Requirements for perforated pipe

31、s and fittings Part 6: Requirements for components of manholes and inspection chambers Part 7: Requirements for pipes and joints for pipe jacking According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European St

32、andard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

33、Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 295-2:2013-05 EN 295-2:2013 (E) 4 1 Scope This European Standard specifies requirements for the evaluation of conformity of products manufactured from vitrified clay and other materials (referred to as “products“) specified in the fol

34、lowing standards: pipes, fittings and joints according to EN 295-1; adapters, connectors and flexible couplings according to EN 295-4; perforated pipes and fittings according to EN 295-5; components of manholes and inspection chambers according to EN 295-6; and pipes and joints for pipe jacking acco

35、rding to EN 295-7. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (

36、including any amendments) applies. EN 295-1:2013, Vitrified clay pipe systems for drains and sewers Part 1: Requirements for pipes, fittings and joints EN 295-3:2012, Vitrified clay pipe systems for drains and sewers Part 3: Test methods EN 295-4:2013, Vitrified clay pipe systems for drains and sewe

37、rs Part 4: Requirements for adaptors, connectors and flexible couplings EN 295-5:2013, Vitrified clay pipe systems for drains and sewers Part 5: Requirements for perforated pipes and fittings EN 295-6:2013, Vitrified clay pipes systems for drain and sewers Part 6: Requirements for components of manh

38、oles and inspection chambers EN 295-7:2013, Vitrified clay pipe systems for drains and sewers Part 7: Requirements for pipes and joints for pipe jacking EN 681-1, Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber EN 681-4,

39、 Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications Part 4: Cast polyurethane sealing elements EN ISO 10012, Measurement management systems Requirements for measurement processes and measuring equipment (ISO 10012) ISO 2859-1, Sampling procedures fo

40、r inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection ISO 3951 (all parts), Sampling procedures for inspection by variables DIN EN 295-2:2013-05 EN 295-2:2013 (E) 5 3 Terms and definitions For the purposes of this document, the follow

41、ing terms and definitions apply. 3.1 initial type testing complete set of tests or other procedures (e.g. calculation) described in the harmonised technical specification, to determine the performance of samples of products representative of the product type Note 1 to entry: In the case of a CE mark

42、ed product, the initial type testing provides the reference for the declared performance concerning the essential characteristics. 3.2 type testing test or series of tests aimed at approving a project to determine that the element designed is able to fulfil the requirements of the product specificat

43、ion 3.3 factory production control permanent internal control of production exercised by the manufacturer 3.4 batch clearly identifiable collection of units manufactured essentially from the same materials and under the same conditions 3.5 isolated batch clearly identifiable collection of unassessed

44、 units manufactured essentially from the same materials but not necessarily all manufactured or fired at the same time 4 Abbreviations AQL Acceptance quality limit MDV Manufacturers declared value FPC Factory production control PU Polyurethane PP Polypropylene 5 Evaluation of conformity 5.1 General

45、The conformity of the products covered by this European Standard, with the requirements of the corresponding specific product standards (i.e. EN 295-1:2013, EN 295-4:2013, EN 295-5:2013, EN 295-6:2013 and EN 295-7:2013) and with the declared values (including classes) shall be demonstrated by: initi

46、al type testing and type testing, factory production control by the manufacturer, including product assessment. The manufacturer shall always retain the overall control and shall have the necessary means to take responsibility for the product. DIN EN 295-2:2013-05 EN 295-2:2013 (E) 6 5.2 Initial typ

47、e testing (ITT) and type testing (TT) 5.2.1 General Initial type testing and type testing shall be performed to demonstrate compliance of the products with the relevant specific product standards. All essential characteristics in bold in Table 1 for which the manufacturer declares performances, are

48、subject to initial type testing. In addition, the need to perform Type Tests applies to the characteristics according to 5.2.2 and 5.2.3 when the manufacturer claims compliance, unless the standard gives provisions (e.g. use of previously existing data, CWFT and conventionally accepted performance)

49、for declaring performances without performing tests. Tests previously performed in accordance with the provisions of this standard may be taken into account provided that they were made to the same or a more rigorous test method, under the same system of attestation of conformity on the same product or products of similar design, construction and functionality, such that the results are applicable to the product in question. ITT shall be performed at the beginning of the production of a ne