DLA MIL-DTL-3661 41 C-2008 LAMPHOLDERS INDICATOR LIGHTS INDICATOR-LIGHT HOUSINGS AND INDICATOR-LIGHT LENSES INDICATOR-LIGHT (NON-REMOVABLE) STYLE LHC83 (ELECTROMAGNETIC INTERFERENC.pdf

《DLA MIL-DTL-3661 41 C-2008 LAMPHOLDERS INDICATOR LIGHTS INDICATOR-LIGHT HOUSINGS AND INDICATOR-LIGHT LENSES INDICATOR-LIGHT (NON-REMOVABLE) STYLE LHC83 (ELECTROMAGNETIC INTERFERENC.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-DTL-3661 41 C-2008 LAMPHOLDERS INDICATOR LIGHTS INDICATOR-LIGHT HOUSINGS AND INDICATOR-LIGHT LENSES INDICATOR-LIGHT (NON-REMOVABLE) STYLE LHC83 (ELECTROMAGNETIC INTERFERENC.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 INCH-POUND INCH-POUND MIL-DTL-3661/41C 09 October 2008 SUPERSEDING MIL-L-3661/41B 14 July 1969 MILITARY SPECIFICATION SHEET LAMPHOLDERS, INDICATOR LIGHTS, INDICATOR-LIGHT HOUSINGS AND INDICATOR-LIGHT LENSES INDICATOR-LIGHT (NON-REMOVABLE), STYLE LHC83 (ELECTROMAGNETIC INTERFERENCE AND NON-ELECTROMA

2、GNETIC TYPES) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-3661. AMSC N/A FSC 6210 Provided by IHSNot for ResaleNo reproduction or

3、 networking permitted without license from IHS-,-,-MIL-DTL-3661/41C REQUIREMENTS: 1. Design and construction. See figure one. 2. Dielectric withstanding voltage: Sea level 500 Volts r.m.s. at 60Hz. 3. Bushing torque: 8 pound-inches. 4. Lamp (non-replaceable): MIL-DTL-6363/5 “Part number M6363/5-1AS1

4、5” 5. Shock: Method II 6. Wire leads shall be in accordance with SAE-AS22759/11. 7. Threaded stud case shall be fabricated from a corrosion-resistant steel. The finish is optional. 8. Effective lens face: 0.1925 dia. .0175 9. Weight: 0.005 pound maximum. 10. Marking: Type designation to be stamped o

5、n the wire or insulating sleeve. 11. If Electromagnetic Interference (EMI) shielded; case must be grounded. TABLE I. Conformance Inspection.Type Designation Tests MIL-DTL-3661 Extent of Approval LHC83 / 1WT2 (12 Sample units) All test of Table IV LHC83 / 1RT2 LHC83 / 1GT2 LHC83 / 1BT2 LHC83 / 1YT2 L

6、HC83 / 2WT2 LHC83 / 2RT2 LHC83 / 2GT2 LHC83 / 2BT2 LHC83 / 2YT2 (2 Sample units each) Group I of Table IV (visual and mechanical examination only) ALL 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3661/41C TABLE II. Type Designation.Type

7、Designation Lens Material Electromagnetic Interference(EMI) Transmittance Lens Color LHC83 / 1WT2 Plastic Not EMI* Translucent White LHC83 / 1RT2 Plastic Not EMI* Translucent Red LHC83 / 1GT2 Plastic Not EMI* Translucent Green LHC83 / 1BT2 Plastic Not EMI* Translucent Blue LHC83 / 1YT2 Plastic Not E

8、MI* Translucent Yellow LHC83 / 2WT2 Plastic EMI* Translucent White LHC83 / 2RT2 Plastic EMI* Translucent Red LHC83 / 2GT2 Plastic EMI* Translucent Green LHC83 / 2BT2 Plastic EMI* Translucent Blue LHC83 / 2YT2 Plastic EMI* Translucent Yellow * Not Electromagnetic interference shielded. * Electromagne

9、tic interference shielded. Case must be grounded. CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Army - CR Navy - AS Air Force - 99 DLA GS-2 (Projec

10、t 6210-2008-009) Review Activities: Army CR4 Navy - MC Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at http:/assist.daps.dla.mil/. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-