DLA A-A-59906-2012 SHOVEL AVALANCHE WITH PROBE REPLACEMENT KIT.pdf

《DLA A-A-59906-2012 SHOVEL AVALANCHE WITH PROBE REPLACEMENT KIT.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-59906-2012 SHOVEL AVALANCHE WITH PROBE REPLACEMENT KIT.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 AMSC N/A FSC 8465 A-A-59906 23 August, 2012 COMMERCIAL ITEM DESCRIPTION SHOVEL, AVALANCHE WITH PROBE, REPLACEMENT KIT The General Services Administration has authorized the use of this Commercial Item Description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the

2、requirements for a kit that replaces the avalanche shovel and probe that are issued in the Snow and Ice Mobility Kit (SIMK) (A-A-59872). 2. CLASSIFICATION. The Shovel, Avalanche with Probe Replacement Kit will be furnished as one kit. 3. SALIENT CHARACTERISTICS. The kit shall be composed of the foll

3、owing items in the following quantities as listed in Table I: TABLE I. List of items in kits 3.1 Dimensions. Individual item dimensions shall be in accordance with drawings and specification requirements specified in the applicable CID document (see Table I) unless item is a manufacturers part numbe

4、r/cage code then, in which manufacturers current specifications apply. 3.2 Color. Individual item colors shall be in accordance with applicable specifications (see Table I). Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support Standardization Team, 700

5、 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil/. Item Name CID Quantity Shovel,

6、 Avalanche A-A-59852 1 Probe, Avalanche A-A-59858 1 Carabiner, Type X A-A-59836 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59906 2 3.3 End item testing. Individual item test standards shall be in accordance with their related Intern

7、ational Climbing and Mountaineering Federation Standards, where applicable. 3.4 Materials. Individual item materials shall be in accordance with applicable specifications (see Table I). 3.5 Workmanship. The Shovel, Avalanche with Probe Replacement Kit shall conform to the quality of product establis

8、hed by this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The Shovel, Avalanche with Probe Replacement Kit shall have no une

9、xpected material or component failures during a continuous one-year cycle. The Shovel, Avalanche with Probe Replacement Kit shall have no unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcodi

10、ng and instruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Shovel, Avalanche With Probe, Replacement Kit shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following

11、information shall be included in the printing for the identification label: SHOVEL, AVALANCHE WITH PROBE REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any m

12、arking on the product c. The use of the product d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging

13、 i. Identification of the model, if more than one model is available 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered

14、, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5.

15、PRODUCT CONFORMANCE PROVISIONS. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59906 3 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawin

16、gs, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in

17、Table II: TABLE II. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. T

18、he preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk,

19、 Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a

20、. Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7). c. Acceptance criteria (see 5.3). d. Packaging (see 6.1). 7.3 National Stock Numbers (NSNs). The following is a list of NSNs associated for Type I, to determine the re

21、quired items for the replacement kit that corresponds to A-A-59852, Shovel, Avalanche, and A-A-59858, Probe, Avalanche, and A-A-59836 listed below: NSNs ITEM 4240-01-582-8278 Probe, Avalanche Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59906

22、4 4240-01-582-8261 Shovel, Avalanche 8465-01-578-8898 Carabiner, Type X 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2012-017 NOTE: The activities listed above were interested in t

23、his document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-