DLA A-A-59812 1-2008 HOLDER ELECTRICAL CARD METAL CARD GUIDE MULTIPLE PIECE CENTER MOUNTING WITH 2 3 OR 4 MOUNTING HOLES AND SUPPORT HOUSING FOR CHASSIS OR COLD PLATE MOUNTING APPL.pdf

《DLA A-A-59812 1-2008 HOLDER ELECTRICAL CARD METAL CARD GUIDE MULTIPLE PIECE CENTER MOUNTING WITH 2 3 OR 4 MOUNTING HOLES AND SUPPORT HOUSING FOR CHASSIS OR COLD PLATE MOUNTING APPL.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-59812 1-2008 HOLDER ELECTRICAL CARD METAL CARD GUIDE MULTIPLE PIECE CENTER MOUNTING WITH 2 3 OR 4 MOUNTING HOLES AND SUPPORT HOUSING FOR CHASSIS OR COLD PLATE MOUNTING APPL.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 A-A-59812/1 INCH-POUND26 June 2008 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, MULTIPLE PIECE, CENTER MOUNTING, WITH 2, 3, OR 4 MOUNTING HOLES AND SUPPORT HOUSING FOR CHASSIS OR COLD PLATE MOUNTING APPLICATIONS The General Services Administration has a

2、uthorized the use of this commercial item description (CID) for all federal agencies. The complete requirements for procuring electrical card guides described herein shall consist of this document and the latest issue in effect of AA59812. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This CID

3、 specification sheet uses a classification system which is included in the Part Identification Number (PIN) as shown in the following example (see NOTES). AA59812 CID number /01 Applicable CID specification sheet Configuration (see table I) # # Length$ Insert material AA59812/01#$ AA59812/01#$ AA598

4、12/01#$& 1/ Manufacturers 2/ Configuration “” Housing length “#” Insert material “$” Finish “&” CAGE 07556 B 80 B C P 3/ UNBC1008-8.0S* UNSS1008-8.0S* UNPB1008-8.0S* A 85 B C P 3/ UNBC1008-8.5H* UNSS1008-8.5H* UNPB1008-8.5H* B 85 B C P 3/ UNBC1008-8.5S* UNSS1008-8.5S* UNPB1008-8.5S* A 90 B C P 3/ UN

5、BC1008-9.0H* UNSS1008-9.0H* UNPB1008-9.0H* B 90 B C P 3/ UNBC1008-9.0S* UNSS1008-9.0S* UNPB1008-9.0S* A 95 B C P 3/ UNBC1008-96.5H* UNSS1008-9.5H* UNPB1008-9.5H* B 95 B C P 3/ UNBC1008-9.5S* UNSS1008-9.5S* UNPB1008-9.5S* A A0 B C P 3/ UNBC1008-10.0H* UNSS1008-10.0H* UNPB1008-10.0H* B A0 B C P 3/ UNB

6、C1008-10.0S* UNSS1008-10.0S* UNPB1008-10.0S* A A5 B C P 3/ UNBC1008-10.5H* UNSS1008-10.5H* UNPB1008-10.5H* B A5 B C P 3/ UNBC1008-10.5S* UNSS1008-10.5S* UNPB1008-10.5S* 1/ See Classification/Part or Identification Number (PIN) for symbol representation. 2/ The manufacturers part number shall not be

7、used for procurement to the requirements of this CID specification sheet. At the time of preparation of this CID, the aforementioned commercial products were reviewed and could be replaced by the CID PINs shown. For actual part marking requirements, see the marking paragraph of AA59812. 3/ Finish ma

8、terials designators “B” (black anodize), “C” (clear anodizel), “G” (gold anodize), “F” (clear chemical film), “Y” (gold chemical film), or “N” (no finish) are applicable to these housing material types. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,

9、-AA59812/1 9 Guidance on use of alternative parts with less hazardous or nonhazardous materials. This CID specification sheet provides for a number of alternative corrosion prevention finishes via the PIN. Users should select the PIN with the least hazardous material that meets the form, fit, and fu

10、nction requirements of their application. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA FSS: Army CR Navy EC Preparing Activity Air Force 11 DLA CC DLA CC Review activity: Project: 59982007039 Air Force 99 NOTE: The activities listed above were interested in this document a

11、s of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-