DIN EN ISO 12999-1-2014 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1 Sound insulation (ISO 12999-1 2014) German version EN .pdf

《DIN EN ISO 12999-1-2014 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1 Sound insulation (ISO 12999-1 2014) German version EN .pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 12999-1-2014 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1 Sound insulation (ISO 12999-1 2014) German version EN .pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、September 2014 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

2、ICS 91.120.20!%:M“2235842www.din.deDDIN EN ISO 12999-1Acoustics Determination and application of measurement uncertainties in buildingacoustics Part 1: Sound insulation (ISO 12999-1:2014);English version EN ISO 12999-1:2014,English translation of DIN EN ISO 12999-1:2014-09Akustik Bestimmung und Anwe

3、ndung der Messunsicherheiten in der Bauakustik Teil 1: Schalldmmung (ISO 12999-1:2014);Englische Fassung EN ISO 12999-1:2014,Englische bersetzung von DIN EN ISO 12999-1:2014-09Acoustique Dtermination et application des incertitudes de mesure dans lacoustique desbtiments Partie 1: Isolation acoustiqu

4、e (ISO 12999-1:2014);Version anglaise EN ISO 12999-1:2014,Traduction anglaise de DIN EN ISO 12999-1:2014-09SupersedesDIN EN 20140-2:1993-05www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 28 pages 08.14 DIN EN ISO 12999-1:2014-09 2 A com

5、ma is used as the decimal marker. National foreword This document (EN ISO 12999-1:2014) has been prepared by Technical Committee ISO/TC 43 “Acoustics”, Subcommittee SC 2 “Building acoustics” (Secretariat: DIN, Germany) in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of buil

6、ding elements and of buildings” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Materials Testing Standards Committee), Working Committee NA 062-02-31 AA Schalldmmung und Schallabsorption, Messung und Bewertung. The DIN St

7、andards corresponding to the International Standards referred to in this document are as follows: ISO 717 (all parts) DIN EN ISO 717 (all parts) ISO 5725-1 DIN ISO 5725-1 ISO 5725-2 DIN ISO 5725-2 ISO 10140 (all parts) DIN EN ISO 10140 (all parts) ISO 16283 (all parts) DIN EN ISO 16283 (all parts) A

8、mendments This standard differs from DIN EN 20140-2:1993-05 as follows: a) the title of the standard has been modified; b) the concept of reproducibility and repeatability has been included; c) the standard has been completely revised. Previous editions DIN EN 20140-2: 1993-05 DIN EN ISO 12999-1:201

9、4-09 3 National Annex NA (informative) Bibliography DIN EN ISO 717 (all parts), Acoustics Rating of sound insulation in buildings and of building elements DIN ISO 5725-1, Accuracy (trueness and precision) of measurement methods and results Part 1: General principles and definitions DIN ISO 5725-2, A

10、ccuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method DIN EN ISO 10140 (all parts), Acoustics Measurement of sound insulation in buildings and of building elements DIN EN IS

11、O 16283 (all parts), Acoustics Rating of sound insulation in buildings and of building elements DIN EN ISO 12999-1:2014-09 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12999-1 May 2014 ICS 17.140.01; 91.120.20 Supersedes EN 20140-2:1993English Version A

12、coustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation Acoustique - Dtermination et application des incertitudes de mesure dans lacoustique des btiments - Partie 1: Isolation acoustique (ISO 12999-1:2014) Akustik - Bestimmung und Anwend

13、ung der Messunsicherheiten in der Bauakustik - Teil 1: Schalldmmung (ISO 12999-1:2014) This European Standard was approved by CEN on 17 April 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of

14、 a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German)

15、. A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, C

16、yprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

17、Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO

18、 12999-1:2014 E(ISO 12999-1:2014) EN ISO 12999-1:2014 (E) 2 DIN EN ISO 12999-1:2014-09 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Detailed uncertainty budget .7 5 Uncertainty determination by inter-laboratory measurements .7 6 Uncertainti

19、es associated with single-number values 11 7 Standard uncertainties for typical measurands .11 8 Application of the uncertainties .14 Annex A (informative) Example of handling uncertainties in building acoustics 16 Annex B (informative) Example for the calculation of the uncertainty of single number

20、 values .19 Annex C (informative) Detailed uncertainty budget .22 Bibliography 24 EN ISO 12999-1:2014 (E) 3 Foreword This document (EN ISO 12999-1:2014) has been prepared by Technical Committee ISO/TC 43 “Acoustics“ in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of buildin

21、g elements and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawn at the

22、latest by November 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 20140-2:1993. According to the CE

23、N-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hunga

24、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 12999-1:2014 has been approved by CEN as EN ISO 12999-1:2014 without an

25、y modification. This first edition of ISO 12999-1 cancels and replaces ISO 140-2:1991, which has been technically revised. It also incorporates the Technical Corrigendum ISO 140-2:1991/Cor 1:1993. ISO 12999 consists of the following parts, under the general title Acoustics Determination and applicat

26、ion of measurement uncertainties in building acoustics: Part 1: Sound insulation A part 2 dealing with sound absorption is under preparation. DIN EN ISO 12999-1:2014-09 “ ”IntroductionAn assessment of uncertainties that is comprehensible and close to reality is indispensable for many questions in bu

27、ilding acoustics. Whether a requirement is met, a laboratory delivers correct results or the acoustic properties of a product are better than the same properties of some other product can be decided only by adequately assessing the uncertainties associated with the quantities under consideration.Unc

28、ertainties should preferably be determined following the principles of ISO/IEC Guide 98-3. This Guide specifies a detailed procedure for the uncertainty evaluation that is based upon a complete mathematical model of the measurement procedure. At the current knowledge, it seems to be impossible to fo

29、rmulate these models for the different quantities in building acoustics. Therefore, only the principles of such an uncertainty assessment are explained.To come to uncertainties all the same, the concept of reproducibility and repeatability is incorporated which is the traditional way of uncertainty

30、determination in building acoustics. This concept offers the possibility to state the uncertainty of a method and of measurements carried out according to the method, based on the results of inter-laboratory measurements.EN ISO 12999-1:2014(E)DIN EN ISO 12999-1:2014-09 41 ScopeThis part of ISO 12999

31、 specifies procedures for assessing the measurement uncertainty of sound insulation in building acoustics. It provides for a detailed uncertainty assessment; a determination of uncertainties by inter-laboratory tests; an application of uncertainties.Furthermore, typical uncertainties are given for q

32、uantities determined according to ISO 10140, ISO 140-4, ISO 140-5, ISO 140-7 and ISO 717 (all parts).2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited

33、 applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 140-4, Acoustics Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between roomsISO 140-5, Acoustics Meas

34、urement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of faade elements and faadesISO 140-7, Acoustics Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of fl

35、oorsISO 717 (all parts), Acoustics Rating of sound insulation in buildings and of building elementsISO 5725-1:1994, Accuracy (trueness and precision) of measurement methods and results Part 1: General principles and definitionsISO 5725-2:1994, Accuracy (trueness and precision) of measurement methods

36、 and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement methodISO 10140 (all parts), Acoustics Laboratory measurement of sound insulation of building elements3 Terms and definitionsFor the purposes of this document, the following terms a

37、nd definitions apply.NOTE Whenever applicable, they are equivalent to those given in ISO 5725-1, in the ISO/IEC Guide 98-31and in ISO/IEC Guide 99.2Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation DIN EN ISO 12999-1:2014-09 5EN ISO 1

38、2999-1:2014 (E) 3.1measurandparticular quantity subject to measurement, e.g. the airborne sound insulation of a particular window pane determined in accordance with ISO 101403.2measurement resultvalue attributed to a measurand, obtained by following the complete set of instructions given in a measur

39、ement procedureNote 1 to entry: The measurement result may be a frequency band level or a single number value determined according to the rating procedures of ISO 717 (all parts).3.3uncertaintyparameter, associated with the result of a measurement, that characterizes the dispersion of the values tha

40、t can reasonably be attributed to the measurand3.4standard uncertaintyuuncertainty of the result of a measurement expressed as a standard deviation3.5combined standard uncertaintyucstandard uncertainty of the result of a measurement when that result is obtained from the values of a number of other q

41、uantities, equal to the positive square root of a sum of terms, the terms being the variances or covariances of these other quantities weighted according to how the measurement result varies with changes in these quantities3.6expanded uncertaintyUquantity defining an interval about the result of a m

42、easurement that may be expected to encompass a large fraction of the distribution of values that can reasonably be attributed to the measurand3.7coverage factorknumerical factor used as a multiplier of the combined standard uncertainty in order to obtain an expanded uncertainty3.8repeatability condi

43、tioncondition of measurement that includes the same measurement procedure, same operators, same measuring system, same location (laboratory or usual building), and replicate measurements on the same object over a short period of time3.9repeatability standard deviationrstandard deviation of measureme

44、nt results obtained under repeatability conditions3.10reproducibility conditioncondition of measurement that includes different locations (laboratories or usual buildings), operators, measuring systems, and replicate measurements on the same or similar objectsEN ISO 12999-1:2014(E)DIN EN ISO 12999-1

45、:2014-09 63.11reproducibility standard deviationRstandard deviation of measurement results obtained under reproducibility conditions3.12in-situ conditioncondition of measurement that includes the same location (laboratory or usual building), and replicate measurements on the same object by different

46、 operators using different measuring systems3.13in-situ standard deviationsitustandard deviation of measurement results obtained under in-situ conditions4 Detailed uncertainty budgetThe derivation of a detailed uncertainty budget is desirable to find out which uncertainty contributions are the most

47、important ones and how these contributions can be reduced. Furthermore, such a budget reflects the individual sound fields during the measurement. Consequently, the uncertainty is valid for an individual measurement result and not for a whole family of results. Annex C gives provisions on the deriva

48、tion of such uncertainty budgets.5 Uncertainty determination by inter-laboratory measurements5.1 GeneralStandard deviations determined by inter-laboratory measurements may serve as an estimate for the standard uncertainty. The general concept and the procedure for determining these standard deviations are given in ISO 5725-1 and ISO 5725-2, respectively. As many operators and laboratories as possible should participate in such inter-laboratory measurements in order to obtain reliable results