DIN EN 15316-5-2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5 Space heating and DHW storage systems (n.pdf

《DIN EN 15316-5-2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5 Space heating and DHW storage systems (n.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15316-5-2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5 Space heating and DHW storage systems (n.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、September 2017 English price group 22No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.140.10; 91.140.65!%mt_“2748

2、160www.din.deDIN EN 15316-5Energy performance of buildings Method for calculation of system energy requirements and system efficiencies Part 5: Space heating and DHW storage systems (not cooling), Module M37, M87;English version EN 153165:2017,English translation of DIN EN 15316-5:2017-09Energetisch

3、e Bewertung von Gebuden Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen Teil 5: Raumheizung und Speichersysteme fr erwrmtes Trinkwasser (keine Khlung), Modul M37, M87;Englische Fassung EN 153165:2017,Englische bersetzung von DIN EN 15316-5:2017-09Performance nergtique

4、 des btiments Mthode de calcul des besoins nergtiques et des rendements des systmes Partie 5: Systmes de stockage pour le chauffage et leau chaude sanitaire (sans refroidissement), Module M37, M87;Version anglaise EN 153165:2017,Traduction anglaise de DIN EN 15316-5:2017-09www.beuth.deDocument compr

5、ises 54 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.09.17 DIN EN 15316-5:2017-09 2 A comma is used as the decimal marker. National foreword This document (EN 15316-5:2017) has been prepared by Technical Committee CEN/TC 228

6、 “Heating systems and water based cooling systems in buildings” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Heiz- und Raumlufttechnik sowie deren Sicherheit (DIN Standards Committee Heating and Ventilation Technology and their Safety),

7、 Working Committee NA 041-05-01 AA “Energy performance of technical building systems (Mirror Committee to ISO/TC 205 “Building environment design”)”. This standard is part of the standard series DIN EN 15316 and has been prepared under the EPBD mandate M/480. DIN EN 15316-5 is a European Standard an

8、d CEN/TR 15316-6-10 is the accompanying Technical Report to this standard containing further informative contents for assessing the energy performance of a building. In Germany, the Directive on the energy performance of buildings (2010/31/EU) of the European Parliament and the European Council is p

9、rimarily implemented by national energy conservation law. National energy conservation law refers to dated national and European standards and national prestandards that have been specified to be implemented in Germany. In Germany, the application of this standard in relation with national energy co

10、nservation law is defined by provisions in this law. Provisions of German energy conservation law cannot be systematically fully and identically implemented with the set of standards under the EPBD mandate M/480 and the therein referenced International and European Standards. When applying the stand

11、ards of the mandate, accordance with German energy conservation law cannot be achieved, whether in terms of the procedure, the result, or assessment of the result. Currently, the set of standards of the EPBD mandate M/480 is not applicable for the purposes of German energy conservation law, even if

12、references to national regulations in the respective national annexes are considered. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15316-5 May 2017 ICS 91.140.10; 91.140.65 English Version Energy performance of buildings - Method for calculation of system energy requirements and system effic

13、iencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7 Performance nergtique des btiments - Mthode de calcul des besoins nergtiques et des rendements des systmes - Partie 5 : Systmes de stockage pour le chauffage et leau chaude sanitaire (sans refroidissement), Modu

14、le M3-7, M8-7 Energetische Bewertung von Gebuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 5: Raumheizung und Speicher fr erwrmtes Trinkwasser (keine Khlung), Modul M3-7, M8-7 This European Standard was approved by CEN on 27 February 2017. CEN members a

15、re bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to

16、 the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management C

17、entre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu

18、ania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marni

19、x 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15316-5:2017 EEN 15316-5:2017 (E) 2 Contents Page European foreword . 5 Introduction 6 1 Scope 8 2 Normative references . 10 3 Terms and definitions 10 4 Sy

20、mbols and abbreviations 11 4.1 Symbols 11 4.2 Subscripts 11 5 Description of the methods 11 5.1 Output of the method 11 5.2 Extension of the method 11 5.3 Technologies covered and schematisation of the hot water storage system . 12 5.4 Principles for hot water storage systems 13 6 Calculation of sto

21、rage systems 14 6.1 Output data . 14 6.2 Calculation time steps 17 6.3 Input data 17 6.3.1 Source of data 17 6.3.2 Product data . 17 6.3.3 System design data 19 6.3.4 Control 19 6.3.5 Operating conditions 19 6.3.6 Constants and physical data . 20 6.4 Calculation procedure 21 6.4.1 Applicable time-st

22、ep . 21 6.4.2 Operating conditions calculation . 21 6.4.3 Energy calculation (storage modelled with multi volumes Method A) . 21 6.4.4 Simplified calculation procedure (storage modelled with a single volume Method B) 26 6.4.5 Thermal losses 28 6.4.6 Calculation of the auxiliary energy 28 6.4.7 Recov

23、erable, recovered thermal losses . 28 7 Quality control 29 8 Compliance check. 29 Annex A (informative) Template for input data and choices 31 A.1 Model information . 31 A.2 Product description data . 31 A.2.1 Storage type 31 A.2.2 Type of energy use (services) 31 A.2.3 Storage fuel . 31 A.2.4 CE ma

24、rking 32 DIN EN 15316-5:2017-09 EN 15316-5:2017 (E) 3 A.2.5 Dimension . 32 A.2.6 Energy input/output . 32 A.2.7 Multiple energy input/output 33 A.2.8 Stand-by thermal losses . 33 A.2.9 Factors for energy recovery . 34 A.3 Design data . 35 A.3.1 Localization 35 A.3.2 Hydraulic connection 35 A.3.3 Sto

25、rage control type 35 A.3.3.1 Type of control 35 A.3.3.2 Adaptation of thermal losses for monthly or annual step time . 36 A.4 Operative conditions for method A hourly calculation time step . 36 A.5 Operative conditions for Method B - bin, monthly or annual calculation time step . 37 Annex B (informa

26、tive) Default Input data 38 B.1 Model information . 38 B.2 Product description data . 38 B.2.1 Storage type 38 B.2.2 Type of energy use (services) 38 B.2.3 Storage fuel . 38 B.2.4 CE marking 38 B.2.5 Dimension . 38 B.2.6 Energy input/output . 38 B.2.7 Multiple energy input/output 39 B.2.8 Stand-by t

27、hermal losses . 39 B.2.9 Factors for energy recovery . 41 B.3 Design data . 41 B.3.1 Localization 41 B.3.2 Hydraulic connection 41 B.3.3 Storage control type 41 B.3.3.1 Type of control 41 B.3.3.2 Adaptation of thermal losses for monthly or annual step time . 41 B.4 Operative conditions for method A

28、hourly calculation time step . 41 B.5 Operative conditions for Method B - bin, monthly or annual calculation time step 42 DIN EN 15316-5:2017-09 EN 15316-5:2017 (E) 4 Annex C (normative) Selection of methods . 43 C.1 Method A - Model based on a representation of stratified temperature in the storage

29、 . 43 C.1.1 Applicability of the stratified model . 43 C.1.2 Selection of the number of volumes to model the storage unit . 43 C.2 Method B - Model based on a representation of an homogenous temperature in the storage . 43 Annex D (informative) Alternative presentation for Method A 44 D.1 Step 2 - D

30、irect withdrawal of a heat quantity (volume to withdraw) . 44 D.1.1 General . 44 D.1.2 Additional . 46 D.2 Step 3 - Temperature of the storage after volume withdrawal . 46 D.3 Step 6 - indirect heat input and output 47 D.4 Rearrange temperatures in the storage to a natural state 49 D.5 Heat exchange

31、r - additional . 50 D.5.1 General . 50 D.5.2 Indirect heat input in the storage, using a solar collector loop. 50 D.5.3 Indirect heat output from the storage to the space heating service. . 51 Bibliography . 52 DIN EN 15316-5:2017-09 EN 15316-5:2017 (E) 5 European foreword This document (EN 15316-5:

32、2017) has been prepared by Technical Committee CEN/TC 228 “Heating systems and water based cooling systems in buildings”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at

33、 the latest by November 2017 and conflicting national standards shall be withdrawn at the latest by November 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying an

34、y or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this

35、 European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia,

36、Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 15316-5:2017-09 EN 15316-5:2017 (E) 6 Introduction This European Standard is part of a series of standards aiming at international harmonization of the methodology for the assessment of the energy performance of bu

37、ildings, called “set of EPB standards”. All EPB standards follow specific rules to ensure overall consistency, unambiguity and transparency. All EPB standards provide a certain flexibility with regard to the methods, the required input data and references to other EPB standards, by the introduction

38、of a normative template in Annex A and Annex B with informative default choices. EPB standards deal with energy performance calculation and other related aspects (like system sizing) to provide the building services considered in the EPBD. This standard specifies two methods to take into account the

39、 energy performance of storage systems for heating of domestic hot water coupled to generation system(s) producing hot water or using independent energy input to the storage unit. This standard presents two methods applicable to the different technologies of water based storage system and related co

40、ntrols systems: method A applies when the hot water is thermally stratified; method B applies when the hot water contained in the storage unit(s) is thermally homogeneous. The standard covers typically hourly time-step but can be adapted to different time steps accordingly with the scenarios used fo

41、r energy use and energy delivered. The subjects covered by CEN/TC 228 are the following: design of heating systems (water based, electrical etc.); installation of heating systems; commissioning of heating systems; instructions for operation, maintenance and use of heating systems; methods for calcul

42、ation of the design heat loss and heat loads; methods for calculation of the energy performance of heating systems. For the correct use of this standard, Annex A is to be used to specify the choices with the required input data for use with method A (hourly calculation time step) or Method B (other

43、calculation time steps). Default values for use of the Method A and B monthly and annual methods are provided in Annex B. In case the standard is used in the context of national or regional legal requirements, mandatory choices may be given at national or regional level for such specific application

44、s, in particular for the application within the context of EU Directives transposed into national legal requirements. These choices can be made available as National Annex or as separate (e.g. legal) document. It is expected, if the default values and choices in Annex A are not followed due to natio

45、nal regulations, policy or traditions, that: either the national standardization body will consider the possibility to add or include a National Annex in agreement with the template of Annex A; or the national or regional authorities will, in the building regulations, reference the standard and prep

46、are data sheets containing the national or regional choices and values, in agreement with the template of Annex A. Heating systems also include the effect of attached systems such as hot water production systems. DIN EN 15316-5:2017-09 EN 15316-5:2017 (E) 7 All these standards are systems standards,

47、 i.e. they are based on requirements addressed to the system as a whole and not dealing with requirements to the products within the system. Where possible, reference is made to other European or International Standards, a.o product standards. However, use of products complying with relevant product

48、 standards is no guarantee of compliance with the system requirements. The requirements are mainly expressed as functional requirements, i.e. requirements dealing with the function of the system and not specifying shape, material, dimensions or the like. The guidelines describe ways to meet the requ

49、irements, but other ways to fulfil the functional requirements might be used if fulfilment can be proved. Heating systems differ among the member countries due to climate, traditions and national regulations. In some cases, requirements are given as classes so national or individual needs may be accommodated. In cases where the standards contradict with national regulations, the latter should be followed. Table 1 shows the relative