DIN EN 15016-4-2006 Technical drawings - Railway applications - Part 4 Data exchange English version of DIN EN 15016-4 2006-06《技术制图 轨道交通 第4部分 数据交换》.pdf

《DIN EN 15016-4-2006 Technical drawings - Railway applications - Part 4 Data exchange English version of DIN EN 15016-4 2006-06《技术制图 轨道交通 第4部分 数据交换》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15016-4-2006 Technical drawings - Railway applications - Part 4 Data exchange English version of DIN EN 15016-4 2006-06《技术制图 轨道交通 第4部分 数据交换》.pdf（27页珍藏版）》请在麦多课文档分享上搜索。

1、 DEUTSCHE NORM June 2006DIN EN 15016-4 ICS 01.100.01; 35.240.10 Technical drawings Railway applications Part 4: Data exchange English version of DIN EN 15016-4:2006-06 Technische Zeichnungen Bahnanwendungen Teil 4: Datenaustausch Englische Fassung DIN EN 15016-4:2006-06 Document comprises 27 pages N

2、o part of this standard may be reproduced without prior permission of DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). English price group 12 www.din.de www.beuth.de !,o$7“10.06 9760120DIN EN

3、 15016-4:2006-06 2 National foreword This standard has been prepared by CEN/TC 256 Railway applications (Secretariat: Germany), Working Group WG 19 Technical drawings (Chairmanship: Denmark). The responsible German body involved in its preparation was the Normenausschuss Schienenfahrzeuge (Rail Vehi

4、cles Standards Committee), Technical Committee 04-10 AA (former designation: AA 4.10) Datenaus-tausch technischer Dokumente. The EN ISO 21267 series of standards has been withdrawn and is now published as the EN 15016 series of standards, which is based upon the former. EUROPEAN STANDARDNORME EUROPE

5、NNEEUROPISCHE NORMEN 15016-4February 2006ICS 01.100.01; 45.020English VersionTechnical drawings - Railway applications - Part 4: DataexchangeApplications ferroviaires - Dessins techniques - Partie 4:Echange des donnesTechnische Zeichnungen - Bahnanwendungen - Teil 4:DatenaustauschThis European Stand

6、ard was approved by CEN on 21 December 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning s

7、uch nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language a

8、nd notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net

9、herlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation i

10、n any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15016-4:2006: EEN 15016-4:2006 (E) 2 Contents Page Foreword 3 Introduction4 1 Scope .5 2 Normative references .5 3 Terms and definitions.6 4 Administration of distributed information.6 5 Exchange of parts lists data.7

11、 5.1 General 7 5.2 Transfer structure .14 5.3 Data security .14 6 Exchange of technical documents 14 6.1 List of technical documents.14 6.2 Table of technical documents15 Annex A (informative) Example for layout of a table of documents .16 A.1 General 16 A.2 Front page .16 A.3 Following pages16 A.4

12、Description of data fields and entering rules18 A.5 Description of data fields and entering rules20 Annex B (informative) Example for entries in a table of documents 22 B.1 Front page .22 B.2 Following pages23 Bibliography.25 EN 15016-4:2006 (E) 3 Foreword This European Standard (EN 15016-4:2006) ha

13、s been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2006, and conflicting nati

14、onal standards shall be withdrawn at the latest by August 2006. This European Standard has been prepared under a mandate M/024 given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This European Standard has been prep

15、ared under Mode 4 co-operation with CENELEC/TC9X. In the event of an amendment being required to this European Standard, the co-op TC shall be consulted before proceeding to amend this European Standard. Particular considerations were made to standardize the computerised transfer of the content of t

16、he documents, its output on conventional information carrier and its reproduction without loss of quality. Remarks in International Standards with regard to document handling are respected and supported by this European Standard and if necessary adopted or completed to the well-established procedure

17、s in the European railway business. This standard “Technical drawings Railway applications” consists of the following parts: EN 15016-1: General principles EN 15016-2: Parts lists EN 15016-3: Handling of modifications of technical documents EN 15016-4: Data exchange According to the CEN/CENELEC Inte

18、rnal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nethe

19、rlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 15016-4:2006 (E) 4 Introduction In railway business, the customer very often requires, as part of a contract, technical documents in a certain form. In order to support co-operation and e

20、ffective exchange of information between customers, suppliers and partners, it is necessary to have the document requirements precisely defined. This European Standard refers to EN, ISO or IEC standards dealing with data fields. In cases where ISO or IEC standards are not sufficiently precise, this

21、European Standard gives specific details. These additions to EN, ISO and IEC standards facilitate the exploitation and the administration of the data exchange. These requirements have been drawn up in order to accommodate: the large variety of users; ease of transfer of documents; any specific serie

22、s of documentation related to the railway material they define. Special consideration has been given to those producing drawings by computer or micro-copying and their reproduction without loss of quality. NOTE The range of documents covers documents such as specifications, conditions for acceptance

23、 or further technical specifications that may not be graphically represented. This is meant to highlight the difference between “graphical representation“ and “verbal description“. EN 15016-4:2006 (E) 5 1 Scope This European Standard specifies the basis of an administrative process for exchange of d

24、ata such as technical drawings, design parts lists (see EN 15016-2) and other related technical documents for railway applications. This European Standard applies to all railway organisations and parties concerned with the exchange of technical documents like drawings, parts lists and related techni

25、cal documents that are officially numbered. Furthermore, it applies to suppliers preparing these documents on behalf of the railway companies or railway network users. The basic requirements apply to all drawings, parts lists and related technical documents independently of the type of data e.g. gra

26、phical information (images), database types or types of data carriers. These rules are applied by all railway companies and railway industry in the countries of the European Union (EU). Alternatively, the application of these rules can be agreed between contract partners who are settled in the EU an

27、d partners who are not settled in the EU by means of a contract and/or mutual agreement. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest

28、 edition of the referenced document (including any amendments) applies. EN 15016-2, Technical drawings Railway applications Part 2: Parts lists EN 15016-3, Technical drawings Railway applications Part 3: Handling of modifications of technical documents EN 61346-1:1996, Industrial systems, installati

29、ons and equipment and industrial products Structuring principles and reference designations Part 1: Basic rules (IEC 61346-1:1996) EN 61346-2:2000, Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 2: Classification of obje

30、cts and codes for classes (IEC 61346-2:2000) EN 61355:1997, Classification and designation of documents for plants, systems and equipment (IEC 61355:1997) EN 82045-2:2005, Document management Part 2: Metadata elements and information reference model (IEC 82045-2:2004) EN ISO 5457:1999, Technical pro

31、duct documentation Sizes and layout of drawing sheets (ISO 5457:1999) ISO 639-1, Codes for the representation of names of languages Part 1: Alpha-2 code ISO/IEC 6523-1:1998, Information technology Structure for the identification of organizations and organization parts Part 1: Identification of orga

32、nization identification schemes ISO/IEC 8859-1:1998, Information technology 8-bit single-byte coded graphic character sets Part 1: Latin alphabet No. 1 ISO 8601:2004, Data elements and interchange formats Information interchange Representation of dates and times EN 15016-4:2006 (E) 6 3 Terms and def

33、initions For the purposes of this European Standard, the following terms and definitions apply. 3.1 document information on a data medium. Normally a document is designated in accordance with the type of information and the form of presentation, for example overview diagram, connection table, functi

34、on chart EN 61082-1:1993 3.2 drawing list list of drawings in no particular order. Possible structural correlations are neither visible nor comprehensible 3.3 table of drawings list of drawings to which parts lists are referred to in particular order. The structural correlations among the documents

35、are visible and comprehensible 3.4 technical document (general) necessary information, which is as complete as possible, gathered to form a unit for technical purposes. The information is stored on an information medium in a non-volatile memory and is legible directly or by means of optical or elect

36、ronic aids. NOTE Technical documents are part of the complete documentation and are necessary e.g. for manufacturing, maintenance, procurement and application of products 3.5 technical document (specific) document that contains important and main data of the technical product, which are not included

37、 in drawings and parts lists NOTE 1 This definition is applied in clause 6 NOTE 2 Technical documents are, inter alia, data sheets, descriptions, instructions/directions and manuals. 4 Administration of distributed information Documents and information in a general sense can be sent in a variety of

38、physical and electronic forms. It shall be indicated in the administrating system in what form the information was sent. When information is dispatched electronically it shall also be indicated in which format the files are written and which version of the application is used. To avoid misunderstand

39、ing between contract partners, non-contract partners and customers, administrative procedures shall be set in force to keep track of information distributed. Therefore, the following points are to be considered important for storage and maintenance in a companys database or administrative system. NO

40、TE Documents can be sent for a variety of reasons and purposes e.g. just for information, to get a feedback of the status, to get an approval, to inform the client/customer etc. The status of the information sent shall be administrated to ensure that in case of a disagreement or evaluation of the da

41、ta etc., both partners shall discuss the same issues and subject(s). It shall be clearly indicated, e.g. by a contract, if data may be modified, changed or distributed to third parties by the receiver (not owner of the intellectual property rights). EN 15016-4:2006 (E) 7 5 Exchange of parts lists da

42、ta 5.1 General To exchange (electronic) parts list data between various companies, partners, clients and customers, it shall be ensured that the data sent are also received by the other party. All data should be structured in a form agreed by both parties without being bound to computer system relat

43、ed formats. Therefore, it is recommended to send the data in a standardised ASCII format. Tables 1 to 6 describe the parts list database fields accordingly to the fields defined in the Parts 1, 2 and 3 of this standard. Table 1 Shipment statistic Field no.Metadata identifier according to EN 82045-2

44、EN82045-2 NodField identifier Field name Data typeb Datalength Value space / pattern Value source LanguagedependentImportancec Remark 1 OrganizationIdISO6523Owner29 Organization identification according to ISO/IEC 6523 of legal ownera C 78 4 “/“ 35 “/“ 35 “/“ 1 ISO/IEC 6523-1 No C The 2 elements ICD

45、 and OI with together 40 characters are obligatory. 2 DistributionDate 113 Shipment date D 17 YYYYMMDDThhmmss ISO 8601 No C 3 NUPLIT Number of structural items N 6 No C 4 NUPLH Number of structure headings N 6 No C 5 NUMOD Number of main object data N 6 No C 6 NUDOC Number of documents N 6 No C 7 NU

46、TXT Number of text records N 6 No C 8 RepresentationCharacterSet 102 Character set C 25 IEC 82045-2 No C concerns Tables 1 to 6 Example: “ISO/IEC 8859-1“ aprimary key of the table bC=alphanumerical, D=date and/or time, N=numerical cC=compulsory, R=recommended, I=informatived xx means that the metada

47、ta identifier was composed of the basic element with the number xx in Clause 8 and applying the formation rule in subclause 4.4 of EN 82045-2 EN 15016-4:2006 (E) 8 Table 2 Parts list structural items Field no.Metadata identifier according to EN 82045-2 EN82045-2Nod Field identifier Field name Data t

48、ypebDatalength Value space / pattern Value source LanguagedependentImportancecRemark 1 OrganizationIdISO6523Owner29 Organization identification acc. ISO/IEC 6523 of legal owneraC 78 4 “/“ 35 “/“ 35 “/“ 1 ISO/IEC 6523-1 No C The 2 elements ICD and OI with together 40 characters are obligatory. 2 Docu

49、ment Id Parts List Manufacturer2 Identification number parts listaC 20 No C 3 ITNO parts list item numberaC 6 No C 4 QNOP Quantity, number of pieces N 10 6 “.“ 3 No C 5 LanguageCode1 5 Language code 1 C 2 “aa“-“zu“ ISO 639-1 No C 6 UNIT1 unit quantity of item language 1 C 3 ISO 2955 Yes C basic quantity unit in language 1 7 LanguageCode2 5 Language code 2 C 2 “aa“-“zu“ ISO 639-1 No I 8 UNIT2 unit quantity of item language 2 C 3 ISO 2955 Yes I basic quantity unit in language 2 9 INP