DIN EN 12653-2010 Footwear leather and imitation leather manufacturing machines - Nailing machines - Safety requirements German version EN 12653 1999+A2 2009《鞋靴 皮革类 人造皮革类生产设备 钉接机 安.pdf

《DIN EN 12653-2010 Footwear leather and imitation leather manufacturing machines - Nailing machines - Safety requirements German version EN 12653 1999+A2 2009《鞋靴 皮革类 人造皮革类生产设备 钉接机 安.pdf》由会员分享，可在线阅读，更多相关《DIN EN 12653-2010 Footwear leather and imitation leather manufacturing machines - Nailing machines - Safety requirements German version EN 12653 1999+A2 2009《鞋靴 皮革类 人造皮革类生产设备 钉接机 安.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、June 2010 Translation by DIN-Sprachendienst.English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 6

2、1.060!$iB“1700431www.din.deDDIN EN 12653Footwear, leather and imitation leather manufacturing machines Nailing machines Safety requirements (includes Amendment A2:2009)English translation of DIN EN 12653:2010-06Maschinen fr die Herstellung von Schuhen, Leder- und Kunstlederwaren Nagelmaschinen Siche

3、rheitsanforderungen (enthlt nderung A2:2009)Englische bersetzung von DIN EN 12653:2010-06Machines pour la fabrication des chaussures et articles en cuir et en matriauxsimilaires Machines clouer Exigences de scurit (Amendement A2:2009 inclus)Traduction anglaise de DIN EN 12653:2010-06SupersedesDIN EN

4、 12653:2001-02 andDIN EN 12653/A1:2005-09See start of validitywww.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.300 .10 5DIN EN 12653:2010-06 A comma is used as the decimal marker. Start of validity This standard takes effect on 1 Ju

5、ne 2010. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 201 “Leather and imitation leather goods and footwear manufacturing machinery Safety” (Secretariat: UNI, Italy). The responsible German body involved in its preparatio

6、n was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Section Schuh- und Ledermaschinen. Amendment of the European Machinery Directive has made it necessary to review the previously valid standard, EN 12653:1999, in terms of the essential requirements of the new Europe

7、an Machinery Directive, 2006/42/EC. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC (valid until 28 December 2009), and the “revised Machinery Directive”, Directive 2006/42/EC, which takes effect on 29 Decem

8、ber 2009, and which apply to nailing machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directives. Once this standard is cited in the Official Journal of the European Union

9、, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in clause 2 and in the bibliography of the EN have been published as the cor

10、responding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 12653:2001-02 and DIN EN 12653/A1:2005-09 as follows: a) Amendment A1:2004 has been incorporated. b) Normative references have been updated. c) Annex C “Noise test code for nailing machines”

11、has been included. d) The information for use given in 7.1 and 7.2 has been amended. e) Table 2 “Methods of verification” has been updated. f) Annex ZA “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC” has been updated. g) An informative Annex ZB “

12、Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been included. Previous editions DIN EN 12653: 2001-02 DIN EN 12653/A1: 2005-09 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12653:1999+A2 August 2009 ICS 61.060 Supersedes EN 12653:1

13、999English Version Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements Machines pour la fabrication des chaussures et articles en cuir et en matriaux similaires - Machines clouer - Exigences de scurit Maschinen fr die Herstellung von Schuhen aus Le

14、der und Kunstleder - Nagelmaschinen - SicherheitsanforderungenThis European Standard was approved by CEN on 4 September 1999 and includes Amendment 1 approved by CEN on 23 August 2004, and Amendment 2 approved by CEN on 16 July 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regu

15、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This

16、 European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are t

17、he national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerla

18、nd and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1

19、2653:1999+A2:2009: EEN 12653:1999+A2:2009 (E) 2 Contents Page Foreword 3Introduction .41 Scope 42 Normative references 43 #Terms and definitions$ .64 List of significant hazards . 105 Safety requirements and/or measures . 116 Verification of the safety requirements and/or measures 157 Information fo

20、r use . 18Annex A (normative) Stop and release control device . 20Annex B (normative) Well tried components and principles #deleted text$ . 21Annex C (normative) !Noise test code for nailing machines“ . 22Annex ZA (informative) #Relationship between this European Standard and the Essential Requireme

21、nts of EU Directive 98/37/EC$ 26Annex ZB (informative) #Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC$ 27Bibliography . 28DIN EN 12653:2010-06 EN 12653:1999+A2:2009 (E) 3 Foreword This document (EN 12653:1999+A2:2009) has been prepared by Techn

22、ical Committee CEN/TC 201 “Leather and imitation leather goods and footwear manufacturing machinery - Safety“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest

23、 by February 2010, and conflicting national standards shall be withdrawn at the latest by February 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all s

24、uch patent rights. This document supersedes EN 12653:1999. This document includes Amendment 1, approved by CEN on 2004-08-23 and Amendment 2, approved by CEN on 2009-07-16. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“ and # $. This European Stan

25、dard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). #For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.$ Accor

26、ding to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvi

27、a, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 12653:2010-06 EN 12653:1999+A2:2009 (E) 4 Introduction #This document is a type C standard as stated in EN ISO 12100. The machinery concerned and

28、 the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the

29、 provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard.$ 1 Scope This standard is applicable to nailing machines used in the footwear manufacturing industry, namely: heel attaching machines (see figure 1) heel nailing ma

30、chines (see figure 2) gang nailing machines (see figure 3) This standard does not apply to gang nailing machines which comply in all respects with the requirements for seat lasting machines: see EN 931. This standard specifies safety requirements for the design and construction of nailing machines.

31、No specific requirements are included for transport, commissioning and decommissioning. It takes account of intended use, #foreseeable misuse and component$ and system failure. This standard covers all hazards relevant to the footwear manufacturing industry. Use of the machines within the scope of t

32、his standard in different industries may give rise to hazards which were not taken into account at the time of its preparation. #This document is not applicable to nailing machines which are manufactured before the date of its publication as EN.$ 2 Normative references #The following referenced docu

33、ments are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.$ #deleted text$ EN 294:1992, Safety of machinery Safety distance to prevent da

34、nger zones being reached by the upper limbs EN 547-1, Safety of machinery Human body measurements Part 1: Principles for determining the dimensions required for openings for whole body access into machinery DIN EN 12653:2010-06 EN 12653:1999+A2:2009 (E) 5 EN 547-2, Safety of machinery Human body mea

35、surements Part 2: Principles for determining the dimensions required for access openings #deleted text$ EN 574:1996, Safety of machinery Two-hand control devices Functional aspects Principles for design EN 894-1, Safety of machinery Ergonomic requirements for the design of displays and control actua

36、tors Part 1: General principles for human interaction with displays and control actuators EN 894-2, Safety of machinery Ergonomic requirements for the design of displays and control actuators Part 2: Displays #EN 894-3$, Safety of machinery Ergonomic requirements for the design of displays and contr

37、ol actuators Part 3: Control actuators EN 931, Footwear manufacturing machines Lasting machines Safety requirements EN 953:1997, Safety of machinery Guards General requirements for the design and the construction of fixed and movable guards #deleted text$ EN 982:1996, Safety of machinery Safety requ

38、irements for fluid power systems and components Hydraulics EN 983:1996, Safety of machinery Safety requirements for fluid power systems and components Pneumatics #EN 999$, Safety of machinery The positioning of protective equipment in respect of approach speeds of parts of the human body #EN 1005-2,

39、 Safety of machinery Human physical performance Part 2: Manual handling of machinery and component parts of machinery$ #EN 1005-3$, Safety of machinery Human physical performance Part 3: Recommended force limits for machinery operation EN 1037:1995, Safety of machinery Prevention of unexpected start

40、-up #deleted text$ EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection #EN 1760-2:2001$, Safety of machinery Pressure sensitive protective devices Part 2: general principles for the design and testing of pressure sensitive edges and press

41、ure sensitive bars #deleted text$ EN ISO 11688-1, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO TR 11688-1:1998) #deleted text$ #EN ISO 121001:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology,

42、 methodology (ISO 12100-1:2003)$ DIN EN 12653:2010-06 EN 12653:1999+A2:2009 (E) 6 #EN ISO 121002:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003)$ #EN ISO 13732-1:2008, Ergonomics of the thermal environment Methods for the assess

43、ment of human responses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1:2006)$ #EN ISO 13849-1, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2006)$ #EN 12545:2000$, Footwear, leather and imitation leather goods manufacturin

44、g machines Noise test code Common requirements #EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005 (modified)$ #deleted text$ EN 60947-4-1, Low-voltage switchgear and control gear Part 4 Contactors and motor-starters Section 1: Electr

45、omechanical contactors and motor-starters #(IEC 60947-4-1:2000)$ EN 60947-5-1, Low-voltage switchgear and control gear Part 5-1: Control circuit devices and switching elements Electro-mechanical control circuit devices #(IEC 60947-5-1:2003)$ #EN 61310-1, Safety of machinery Indication, marking and a

46、ctuation Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007)$ 3 #Terms and definitions$ #For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003 and the following apply.$ 3.1 heel attaching machine (see figure 1) machine which attaches t

47、he heel to the shoe by means of a screw while it is still on the last. The heel can be positioned on the shoe in advance by the use of an adhesive 3.2 heel nailing machine (see figure 2) machine which nails the heel onto the unlasted shoe (shoe with no last) by means of nails and screw 3.3 gang nail

48、ing machine (see figure 3) machine which nails the sole onto the shoe in the heel area using nails while it is still on the last 3.4 hold down (see zone 1 in figures 1, 2 and 3) camping device to hold the heel during positioning on the unit sole and nailing process 3.5 nailing jack (see zone 2 in fi

49、gures 1, 2 and 3) device into which nails are fed before being nailed into the sole/heel by the drivers 3.6 loader arm (see zone 3 in figures 1, 2 and 3) device which carries the nails into the nailing jack 3.7 DIN EN 12653:2010-06 EN 12653:1999+A2:2009 (E) 7 loader (see zone 4 in figures 1, 2 and 3) a box which supplies nails to the loader arm 3.8 thermocement melting chamber (see zone 5 in figures 1 a