DIN EN 10270-3-2012 Steel wire for mechanical springs - Part 3 Stainless spring steel wire German version EN 10270-3 2011《机械弹簧用钢丝 第3部分 不锈钢弹簧钢丝 德文版 EN 10270-3-2011》.pdf

《DIN EN 10270-3-2012 Steel wire for mechanical springs - Part 3 Stainless spring steel wire German version EN 10270-3 2011《机械弹簧用钢丝 第3部分 不锈钢弹簧钢丝 德文版 EN 10270-3-2011》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 10270-3-2012 Steel wire for mechanical springs - Part 3 Stainless spring steel wire German version EN 10270-3 2011《机械弹簧用钢丝 第3部分 不锈钢弹簧钢丝 德文版 EN 10270-3-2011》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、January 2012 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 77.140.25!$y+c“1860864www.din.deDDIN EN 10270-3Steel wire for mechanical springs Part 3: Stainless spring steel wireEnglish translation of DIN EN 10270-3:2012-01Stahldraht fr Federn Teil 3: Nichtrostender Federstahldraht Englische bersetzung von DIN EN 10270-3:2012-01Fils en acier pour ressorts mc

3、aniques Partie 3: Fils en acier inoxydableTraduction anglaise de DIN EN 10270-3:2012-01SupersedesDIN EN 10270-3:2001-08www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.2401.12 DIN EN 10270-3:2012-01 2 A comma is used as the decimal

4、marker. National foreword This standard has been prepared by Technical Committee ECISS/TC 106 “Wire rod and wires” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Iron and Steel Standards Committee), Working Committee NA

5、021-00-06-02 UA Nichtrostende Federsthle. Amendments This standard differs from DIN EN 10270-3:2001-08 as follows: a) new steel wire grades have been included: X5CrNi18-10 (1.4301), X1NiCrMoCu25-20-5 (1.4539), X2CrNiMoN22-5-3 (1.4462); b) four different levels have been specified for the diameter to

6、lerances of wire on coils/reels and spools; c) the standard has been editorially revised. Previous editions DIN 17224: 1955-04, 1968-07, 1982-02 DIN EN 10270-3: 2001-08 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10270-3 October 2011 ICS 77.140.25; 77.140.65 Supersedes EN 10270-3:2001Englis

7、h Version Steel wire for mechanical springs - Part 3: Stainless spring steel wire Fils en acier pour ressorts mcaniques - Partie 3: Fils en acier inoxydable Stahldraht fr Federn - Teil 3: Nichtrostender Federstahldraht This European Standard was approved by CEN on 10 September 2011. CEN members are

8、bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to th

9、e CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Cent

10、re has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norw

11、ay, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form

12、and by any means reserved worldwide for CEN national Members. Ref. No. EN 10270-3:2011: EEN 10270-3:2011 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Information to be supplied by the purchaser .44 Requirements .54.1 Manufacturing process .54.2 Form of delivery .54.3 Surface fini

13、sh .54.4 Chemical composition 54.5 Mechanical properties .64.6 Technological properties 84.7 Supply conditions of wire on coils/reels and spools .84.8 Surface quality 104.9 Inner soundness . 104.10 Dimensions and dimensional tolerances . 105 Testing and inspection . 125.1 Inspection and inspection d

14、ocuments . 125.2 Extent of testing for specific testing. 125.3 Sampling 145.4 Test methods . 145.5 Retests . 156 Marking and packaging 15Annex A (informative) Additional information . 16A.1 Indications for classification of steel grades . 16A.2 Alteration of tensile strength by heat treatment 17A.3

15、Physical properties . 17A.4 Magnetic properties 17A.5 Guidelines for processing and heat treatment . 17Annex B (informative) Cross reference of steel grade designations 21Bibliography . 22DIN EN 10270-3:2012-01 EN 10270-3:2011 (E) 3 Foreword This document (EN 10270-3:2011) has been prepared by Techn

16、ical Committee ECISS/TC 106 “Wire rod and wires”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2012, and conflicting national standards shall be

17、 withdrawn at the latest by April 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10270-3:2001. This

18、 European Standard for steel wire for mechanical springs is composed of the following parts: Part 1: Patented cold drawn unalloyed spring steel wire; Part 2: Oil hardened and tempered spring steel wire; Part 3: Stainless spring steel wire. According to the CEN/CENELEC Internal Regulations, the natio

19、nal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

20、Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 10270-3:2012-01 EN 10270-3:2011 (E) 4 1 Scope 1.1 This European Standard applies to the grades of stainless steels listed in Table 1, which are usually used in the cold drawn condition in

21、 the form of wire of circular cross-section up to 10,00 mm in diameter, for the production of springs and spring parts that are exposed to corrosive effects and sometimes to slightly increased temperatures (see A.1). 1.2 In addition to the steels listed in Table 1 certain of the steel grades covered

22、 by EN 10088-3 e.g. 1.4571, 1.4539, 1.4028 are also used for springs, although to much lesser extent. In these cases the mechanical properties (tensile strength, etc.) should be agreed between purchaser and supplier. Similarly, diameters between 10,00 mm and 15,00 mm may be ordered according to this

23、 standard; in this case the parties should agree upon the required mechanical characteristics. 1.3 In addition to this European Standard the general technical delivery requirements of EN 10021 are applicable. 2 Normative references The following referenced documents are indispensable for the applica

24、tion of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10021, General technical delivery conditions for steel products EN 10027-1:2005, Designation systems for steels Pa

25、rt 1: Steel names EN 10027-2:1992, Designation systems for steels Part 2: Numerical system EN 10088-3, Stainless steels Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes EN 10204:2004, Metallic products Types of inspection documents EN 102

26、18-1, Steel wire and wire products General Part 1: Test methods EN 10218-2, Steel wire and wire products General Part 2: Wire dimensions and tolerances CEN/TR 10261, Iron and steel Review of available methods of chemical analysis EN ISO 377, Steel and steel products Location and preparation of sampl

27、es and test pieces for mechanical testing (ISO 377:1997) EN ISO 6892-1, Metallic materials Tensile testing Part 1: Method of test at room temperature (ISO 6892-1:2009) EN ISO 14284, Steel and iron Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) 3 In

28、formation to be supplied by the purchaser The purchaser shall clearly state in his enquiry or order the product and following information: a) the desired quantity; DIN EN 10270-3:2012-01 EN 10270-3:2011 (E) 5 b) the term spring steel wire or straightened and cut lengths; c) the number of this Europe

29、an Standard: EN 10270-3; d) the steel grade (see Table 1) and for grade 1.4301, 1.4310 and 1.4462 also the tensile strength level (see Table 2); e) the nominal wire diameter (see Table 4) and for cut length the length and the length tolerance class (see Table 6); f) the surface finish (see 4.3, i.e.

30、 coating); g) the form of delivery (see 4.2); h) the type of inspection document to be supplied (see 5.1); i) any particular agreement made. EXAMPLE 2 t stainless steel spring wire according to this standard, grade 1.4310, normal tensile strength level and nominal diameter 2,50 mm, nickel coated in

31、coils with inspection document 3.1 according to EN 10204:2004: 2 t spring steel wire EN 10270-3 1.4310-NS 2,50 - Ni-coated in coils, EN 10204:2004 3.1 4 Requirements 4.1 Manufacturing process Unless otherwise agreed in the order, the manufacturing process used in the making of the stainless steel wi

32、re is left to the discretion of the manufacturer. The starting condition (+AT: solution annealed) of the wire (rod) is specified in EN 10088-3. 4.2 Form of delivery The wire shall be supplied in coils, on spools, on spoolless cores or carriers. Several coils may be assembled on a carrier. Unless oth

33、erwise specified the form of delivery shall be at the manufacturers discretion. They shall however inform the purchaser about the form of delivery. The delivery requirements are specified in 4.7. Wire in straight lengths is normally supplied in bundles. 4.3 Surface finish The wire may be coated or n

34、ot. The specific coating and finish for stainless steel spring wire shall be agreed upon at the time of enquiry and order - e.g. uncoated, polished finish, nickel coated. 4.4 Chemical composition 4.4.1 The requirements for the chemical composition given in Table 1 apply to the heat analysis. 4.4.2 T

35、he permissible deviation of the product analysis from the values specified in Table 1 shall be in accordance with the provision in EN 10088-3. For a single heat the deviation of an element in the product analysis may be only below the minimum or only above the maximum value of the range specified fo

36、r the heat analysis, but not both at the same time. DIN EN 10270-3:2012-01 EN 10270-3:2011 (E) 6 Table 1 Chemical composition Heat analysisa(% by mass) Steel grade C Si Mn P S Cr Mo Ni Other elements max. max. max. max. NamebNumber bX10CrNi18-81.43100,05 to 0,15 2,00 2,00 0,045 0,015 16,0 to 19,0 0,

37、80 6,0 to 9,5 N 0,11 X5CrNiMo17-12-21.4401 c 0,07 1,00 2,00 0,045 0,015 16,5 to 18,5 2,00 to 2,50 10,0 to 13,0 N 0,11 X7CrNiAl17-71.4568 d 0,09 0,70 1,00 0,040 0,015 16,0 to 18,0 - 6,5 to 7,8 Al: 0,70 to 1,50 X5CrNi18-10 1.4301 0,07 1,00 2,00 0,045 0,015 17,5 to 19,5 - 8,0 to 10,5 N 0,11 X1NiCrMoCu2

38、5-20-51.4539 0,020 0,70 2,00 0,030 0,010 19,0 to 21,0 4,0 to 5,0 24,0 to 26,0 N 0,15 Cu: 1,20 to 2,00 X2CrNiMoN22-5-31.4462 e 0,030 1,00 2,00 0,035 0,015 21,0 to 23,0 2, 50 to 3,5 4,5 to 6,5 N: 0,10 to 0,22 aAlternative compositions may be used by agreement. b“Name“ and “Number“ are derived in accor

39、dance with EN 10027-1 and -2 respectively. cSteel 1.4436 may be used to provide increased corrosion resistance compared with 1.4401, with the specification of this part of EN 10270 applicable for steel 1.4401. dFor better cold formability the upper limit of nickel content may be increased up to 8,30

40、 %. e Duplex grades. 4.5 Mechanical properties 4.5.1 For the tensile strength in the as drawn condition the data of Table 2 shall apply. DIN EN 10270-3:2012-01 EN 10270-3:2011 (E) 7 Table 2 Tensile strength in the drawn condition Tensile strength (MPa) a b c d e f for the following steel grades 1.43

41、10 1.4401 1.4568 1.4301 1.4539 1.4462 Nominal diameter mm gNormal tensile strength (NS) - High tensile strength (HS) - min. max. min. max. Normal tensile strength (NS) min. High tensile strength (HS) min. max. min. max. Normal tensile strength (NS) - High tensile strength (HS) - min. max. min. max.

42、min. max. min. max. d 0,20 2 200 2 530 2 350 2 710 1 725 1 990 1 975 2 280 2 000 2150 2 300 1 600 1 840 2 150 2 480 2 370 2 730 0,20 3 mm o 5.4.5 4.6.3 6 Wire cast characteristics All m 10 % c1 1 5.4.7 4.7.34.7.47 Testing for surface quality All o To be agreed at the order 5.4.6 4.8 8 Check on dimen

43、sions All m 100 % 1 1 EN 10218-2 4.10 a m (= mandatory): the test is to be carried out in each case / o (= optional): the test is carried out only if so agreed at the time of ordering.bThe results of the cast analysis for the elements listed in Table 1 for the grade concerned shall be notified to th

44、e customer in all cases.c10 % of the wire units in the production batch, at least 2 but no more than 10 coils/reels or spools.dA production batch is defined as a quantity of production originating from the same cast, which has been subjected to the same conditions of heat treatment, and with the sam

45、e reduction in cross-section and with the same surface finish.DI N EN 10270- 3: 2012- 01 EN 10270-3:2011 (E) 14 5.3 Sampling Sampling and testing preparation shall be in accordance with EN ISO 377 and EN ISO 14284. Samples shall be taken at the end of the coils, reels or spools or at random for wire

46、 in the form of straightened and cut lengths. Table 7/column 8 gives further details. 5.4 Test methods 5.4.1 Chemical composition Unless otherwise agreed at the time of ordering the choice of a suitable physical or chemical method of analysis for the determination of product analysis shall be at the

47、 discretion of the supplier. In cases of dispute the analysis shall be carried out by a laboratory approved by the two parties. The method of analysis to be applied shall be agreed upon, where possible in accordance with CEN/TR 10261. 5.4.2 Tensile test The tensile test shall be carried out accordin

48、g to EN ISO 6892-1, on samples with the full cross-section of the wire. For the calculation of the tensile strength the actual cross-section based on the actual wire diameter is applied. 5.4.3 Coiling test The coiling test shall be carried out in the following manner: A test piece - approximately 500 mm in length - shall be closely wound, under slight but reasonably uniform tension on a mandrel three to three and a half times th