DIN 5418-1993 Rolling bearings dimensions for mounting《滚动轴承 安装尺寸》.pdf

《DIN 5418-1993 Rolling bearings dimensions for mounting《滚动轴承 安装尺寸》.pdf》由会员分享，可在线阅读，更多相关《DIN 5418-1993 Rolling bearings dimensions for mounting《滚动轴承 安装尺寸》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、UDC 621.822.61.8 DEUTSCHE NORM February 1993 DIN - Mounting dimensions of rolling bearings 5418 Beuth Verlag GrnbH. Berlin, has the exclusive right of sale for German Standards (DIN-Normen). 03.95 DIN 5418 Engl. Price group 12 Sales No. O1 12 Wlzlager; Mae fr den Einbau Supersedes March 1981 edition

2、. In keeping with current practice in standards published by the International Organization for Standardization (ISO), a comma has been used throughout as the decimal marker. Dimensions in mm 1 Scope and field of application This standard gives design details of shoulders of shafts and housings, in

3、or on which rolling bearings are to be seated. Compliance with the values specified precludes distortion of the bearing as a result of inadequate fillet radii, leaves enough space for any projecting cage parts of tapered roller bearings and ensures ease of mounting and removal. Where axial loads are

4、 high and in the case of axial contact bearings, attention should be paid to the manufacturers instructions with regard to the design of adjacent machine parts. Continued on pages 2 to 20. Page 2 DIN 5418 2 Dimensions 2.1 Corner radii and shoulder heights Corner radii on shafts and housings shall pr

5、ovide the clearance required for the chamfer on the inner or oute ring of the bear- ing as a function of the chamfer dimension. The shoulder height shall be designed to ensure a seating (contact) surface of adequate size, whilst permitting easy use of withdrawal tools. h h, shoulder height on shaft

6、and housing depth of undercut (type F undercut as in DIN 509 optional, except for radial deep groove ball bearings as in DIN 625 Part 1) ras fillet radius on shaft rbs fillet radius on housing Figure 1 : Housing rs chamfer dimension on roller bearing (single value) -tt Figure 2: Shaft Figure 3: Shaf

7、t with undercut Table 1: Corner radii and shoulder heights of radial bearings (except tapered roller bearings) hi), *) Diameter series as in DIN 616 (min.) 4 8; 9; o (min.) (max.) 0,15 0,15 1 13 2 2-1 3 395 484 5,1 375 475 575 6 3 4 5 6 25 3 4 5 62 7,3 9 11,5 7 83 10 13 8 10 12 15 73 935 12 15 6 8 1

8、0 12 14 17 21 25 16 20 24 29 19 23 28 33 1) If a type F undercut as specified in DIN 509 is provided, the following condition shall be met: h - hi 2 hmin - rs max? rs max (as in DIN 620 Part 6) being the maximum value correlated to the r, min value characteristic of the bearing con- cerned. However,

9、 the maximum value of h should not exceed 1,5 times the values given in the table. those for diameter series 8, 9 and O, to diameter series 1, 2 and 3. 2) In the absence of high axial loads, the values given for diameter series 1, 2 and 3 also apply to diameter series 4 and DIN 5418 Page 3 D - 52 62

10、 72 80 90 100 110 120 130 140 150 160 170 180 190 200 215 225 240 260 280 300 320 2.2 Mounting dimensions of cylindrical roller bearings Cylindrical roller bearings consist of separable sub-units. Provided that adjacent machine parts are designed in accordance with table 2, the housings, together wi

11、th the outer rings located therein and together with the set of rollers, are capable of being separated from the shafi and from the inner rings which remain attached to it. da max. - 27 33 40 45 51 57 63 69 75 81 87 93 99 106 111 119 125 132 140 151 164 176 190 da max. - - - 44 52 57 63 69 76 82 88

12、99 103 109 111 122 db min. - - - 47 55 60 66 73 79 85 91 102 107 112 115 125 Figure 4: NU Figure 5: NJ Figure 6: NUP Table 2: Cylindrical roller bearings as specified in DIN 5412 Part 1 Bearing series NU 2, NU 2 E, NU 22, NU 22 E, NJ 2, NJ 2 E, NJ 22, NJ 22 E, NUP 2, NUP 2 E, NUP 22, NUP 22 E NU 3,

13、NU 3 E, NU 23, NU 23 E, NJ 3, NJ 3 E, NJ 23, NJ 23 E, NUP 3, NUP 3 E, NUP 23, NUP 23 E Bearing bore diameter, d 17 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 1 O0 105 110 1 20 130 140 1 50 1 60 170 180 190 200 220 240 260 NU 10, NU 20 E NU 4, NJ 4, NUP 4 - dc min. - dc min. - dc min. - D da max

14、. db min. D da max. 21 26 31 37 - db min. db min. D - 42 47 55 - 25 30 35 - 27 32 38 40 47 52 62 25 29 34 40 46 52 57 62 - 27 32 37 44 - 30 37 44 - 33 40 48 62 68 75 80 41 46 52 57 44 49 54 59 72 80 85 90 43 49 54 58 50 56 61 67 48 55 60 67 53 60 66 73 1 O0 110 120 130 61 67 74 81 90 95 1 O0 110 63

15、68 73 78 66 71 76 82 1 O0 110 120 125 65 71 77 82 87 94 99 105 - 68 75 81 86 90 97 104 1 o9 - 73 80 87 92 96 104 110 116 - 72 79 85 92 97 105 110 117 1 24 132 137 145 - - 80 86 93 1 O0 106 114 119 127 - 140 150 160 180 190 200 210 225 - 87 94 1 O0 112 118 124 128 139 - 115 125 130 140 145 150 1 60 1

16、70 - 83 90 95 1 o1 106 111 118 1 24 - 87 94 99 106 111 116 122 128 - 130 140 150 160 170 180 190 200 - 111 117 124 130 116 122 129 135 146 1 58 171 184 - 123 130 137 144 134 143 149 1 58 240 250 260 280 149 156 162 173 1 80 200 21 o 225 134 146 156 167 178 190 203 213 226 248 268 292 - - 138 151 161

17、 173 21 5 230 250 270 141 151 166 179 156 168 182 196 156 1 69 182 195 171 184 198 21 3 31 O 340 360 380 190 208 222 237 240 260 280 290 31 O 340 360 400 - 184 197 209 219 233 254 275 300 - 290 31 O 320 340 360 400 440 480 - 192 204 214 227 240 266 293 318 197 21 1 221 234 247 273 298 323 - 210 223

18、233 247 261 289 316 343 - 21 1 223 235 248 263 - - - - 228 24 1 255 268 283 - - - - I (continued) Page 4 DIN 5418 42 42 Table 2 (concluded) max. min. min. max. min. min. min. 22 21 36 36 38 2 3 22 21 35 36 38 2 4 2.3 Mounting dimensions of tapered roller bearings In the case of tapered roller bearin

19、gs, the cage protrudes beyond the face of the outer rings. In order to preclude any risk of the protruding cage grazing against machine parts, the dimensions specified in table 3 shall be complied with. 40 40 47 47 o“ I 23 23 22 23 25 23 24 23 Figure 7: Tapered roller bearing (sectional view) Table

20、3: DIN 720 tapered roller bearing 34 34 40 39 il 34 34 41 41 Bearing bore diameter, d 15 17 20 22 2 3 2 3 I I I I I I 2 3 3 4 I I I I I I I 37 37 42 43 52 52 40 26 44 27 24 25 26 26 25 27 27 26 27 32 36 40 39 37 44 43 - 37 41 41 41 45 45 34 39 43 43 44 47 47 I I 3 4 2 3 4 3 3,5 ras max Ybs max. Symb

21、ol 1 1 1 1 303 02 323 02 302 O3 322 O3 303 O3 323 O3 329 O4 320 O4 X 302 O4 322 O4 322 04 B 303 04 323 04 329122 320122 X DIN 5418 Page 5 Table 3 (continued) - da max. 29 30 30 31 31 30 30 34 34 33 32 33 33 33 - - Ca min. - 2 3 3 2 3 3 4 2 3 3 cb min ras mar rbs max Da db min. 30 30 30 31 31 31 31 3

22、2 32 32 32 34 34 34 Db min. 39 44 44 48 48 49 49 57 59 57 D - 42 47 47 52 52 52 52 62 62 62 45 52 58 58 Symbol min. 37 40 41 44 44 41 43 54 47 53 41 45 46 49 max. - - 42 42 46 46 46 46 55 55 55 - 46 52 52 3 3,5 3 3 4 4 4 3 5 5 329 05 320 05 X 330 05 302 05 322 05 322 05 B 332 05 303 05 313 05 323 05

23、 42 49 55 55 329128 320128 X 322128 B 332128 329 06 320 06 X 330 06 302 06 322 06 322 06 B 332 06 303 06 313 06 323 06 323 06 B 2 3 3 4 2 3 3 2 3 3 5 3 3 4 4 3 3 3 4 4 4 3 4 4 5 3 4 4 3 4 4 5,5 4,5 65 5,5 5,5 47 55 55 62 62 62 62 72 72 72 72 34 35 35 37 37 36 36 40 40 39 38 34 36 36 36 36 36 36 37 3

24、7 37 37 43 48 48 53 52 50 53 62 55 59 59 - 49 49 56 56 56 56 65 65 65 65 44 52 52 57 59 60 59 66 68 66 67 49 55 60 61 62 70 52 58 65 65 65 75 36 38 39 38 38 40 37 38 38 40 38 40 47 50 56 52 55 57 - 52 59 59 59 68 329132 320132 X 302132 322132 B 332132 323132 B 329 07 320 07 X 330 07 302 07 322 07 32

25、2 07 B 332 07 303 07 313 07 323 07 323 07 B 55 62 62 72 72 72 72 80 80 80 80 40 40 41 44 43 42 42 45 44 44 42 52 59 59 67 67 68 68 74 76 74 76 59 65 65 71 74 75 76 76 82 86 82 85 3 4 4 3 3 3 5 3 4 4 4 3 4 4 4 3 3 4 5 3 4 4 4 3 4 4 3 595 5 6 485 7,5 7,5 7,5 3 4,5 4 595 33 53 5,5 7 5 8 8 8 40 41 41 42

26、 42 42 42 44 44 44 44 45 46 46 47 47 47 47 47 49 49 49 49 50 51 51 52 52 50 54 55 62 61 56 61 70 62 66 61 57 60 61 65 69 68 65 67 77 71 73 69 50 56 56 65 65 65 65 71 71 71 71 57 62 62 68 73 73 73 73 81 81 81 81 329 08 320 08 X 330 08 331 08 302 08 322 08 322 08 B 332 08 303 08 313 08 323 08 323 08 B

27、 45 46 46 47 49 48 48 47 52 51 50 50 51 51 51 52 54 62 68 68 75 80 80 80 80 90 90 90 90 68 75 75 80 85 62 67 67 69 74 63 69 69 73 78 64 72 71 77 80 3 4,5 5 5,5 4,5 329 O9 320 O9 X 330 O9 331 O9 302 O9 (continued) Page 6 DIN 5418 Table 3 (continued) 3earing bori diameter, d D da max. db min Db min. C

28、a min. cb min. ras max. bs max Symbol max. min. 85 85 85 1 O0 1 O0 1 O0 1 O0 53 53 52 59 56 56 55 52 52 52 54 54 54 54 73 70 72 86 79 82 76 78 78 78 91 91 91 91 80 82 81 92 95 93 94 535 5,5 7 5 9 8 8 3 4,5 5 6 475 575 65 7.5 6 10 9 9 322 O9 322 O9 B 332 o9 303 O9 313 O9 323 O9 323 O9 B 329 10 320 10

29、 X 330 10 331 10 302 10 322 10 322 10 B 332 10 303 10 313 10 323 10 323 10 B 45 72 80 80 85 90 90 90 90 110 110 110 110 55 56 56 56 58 58 57 57 65 62 62 60 55 56 56 57 57 57 57 57 60 60 60 60 66 72 72 74 79 78 76 77 95 87 90 83 67 74 74 78 83 83 83 83 1 O0 1 O0 1 O0 1 O0 69 77 76 82 85 85 87 87 102

30、104 102 1 03 3 4 4 4 3 3 4 5 4 4 5 5 50 80 90 90 95 100 1 O0 100 120 1 20 120 1 20 61 63 63 62 64 63 62 71 68 68 65 61 62 62 62 64 64 64 65 65 65 65 73 81 81 83 88 87 85 104 94 99 91 74 83 83 88 91 91 91 110 110 110 110 76 86 86 91 94 95 96 111 113 111 112 4 4 5 5 4 4 6 4 4 5 5 3 575 6 7 475 5,5 8 6

31、.5 10,5 10,5 10.5 329 11 320 11 X 330 11 331 11 302 11 322 11 332 11 303 11 313 11 323 11 323 11 B 55 85 95 95 100 110 110 110 130 1 30 130 130 66 67 67 67 70 69 69 77 73 74 71 79 88 88 93 1 o1 1 O1 1 O1 118 118 118 118 66 67 67 67 69 69 69 72 72 72 72 71 72 72 72 74 74 74 77 77 77 77 3 5,5 6 7 4,5

32、595 9 7,5 11,5 11,5 11,5 3 5.5 6 775 475 5.5 9 8 13 12 12 1 175 175 175 2 2 2 3 3 3 3 1 1,5 175 175 2 2 2 3 3 3 3 329 12 320 12 X 330 12 331 12 302 12 322 12 332 12 303 12 313 12 323 12 323 12 B 329 13 320 13 X 330 13 331 13 302 13 322 13 332 13 303 13 313 13 323 13 323 13 B 78 85 85 88 96 95 93 112

33、 103 1 07 1 O0 83 90 89 96 1 06 104 102 122 111 117 1 o9 81 91 90 96 103 104 105 120 1 23 120 122 86 97 96 106 113 115 115 130 132 130 133 4 4 5 5 4 4 6 5 5 6 6 4 4 5 6 4 4 6 5 5 6 6 60 84 93 93 1 03 111 111 111 1 28 1 28 1 28 1 28 90 100 100 110 1 20 1 20 1 20 140 140 140 1 40 100 110 110 1 20 125

34、1 25 125 150 150 150 150 71 72 72 73 77 76 74 83 79 80 77 76 78 78 79 81 80 79 89 84 86 83 65 70 1 1,5 1.5 2 2 2 2 3 3 3 3 76 77 77 79 79 79 79 82 82 82 82 93 98 99 104 110 108 107 130 118 125 117 96 105 105 115 118 119 120 140 141 140 143 94 1 03 1 03 111 116 116 116 138 1 38 1 38 138 4 5 5 6 4 4 7

35、 5 5 6 7 4 6 5,5 8 5 6 9 8 13 12 12 329 14 320 14 X 330 14 331 14 302 14 322 14 332 14 303 14 313 14 323 14 323 14 B (continued) DIN 5418 Page 7 Table 3 (continued) learing bore diameter, d Da da max. 81 83 83 84 86 85 83 95 91 91 90 db min. 81 82 82 84 84 84 84 87 87 87 87 86 87 87 89 90 90 90 92 9

36、2 92 92 cb min. - 4 6 5,5 8 5 6 10 9 14 13 14 4 7 65 8 6 7 11 9,5 15,5 13,5 13,5 Db min. 101 110 110 120 124 124 125 149 151 149 151 Ca min. 4 5 6 6 4 4 7 5 6 7 7 4 6 6 6 4 5 7 5 6 7 7 5 6 6 7 5 5 7 6 6 8 7 D - 105 115 115 125 130 130 130 160 160 1 60 160 Symbol min. 98 103 104 1 o9 115 115 111 139

37、127 133 124 max. 99 108 108 116 121 121 121 148 148 148 148 104 117 117 121 130 130 130 158 158 158 158 - 329 15 320 15 X 330 15 331 15 302 15 322 15 332 15 303 15 313 15 323 15 323 15 B 329 16 320 16X 330 16 331 16 302 16 322 16 332 16 303 16 313 16 323 16 323 16 B 75 110 125 125 130 140 140 140 17

38、0 170 170 170 86 89 90 89 91 90 89 102 97 98 96 102 112 112 114 1 24 122 119 148 134 142 130 106 120 119 126 132 134 135 1 59 1 59 1 59 1 60 80 1 20 130 130 140 150 1 50 1 50 180 180 180 1 80 92 94 94 95 97 96 95 107 103 103 102 92 92 92 95 95 95 95 99 99 99 99 111 117 118 122 132 130 128 156 143 1

39、50 138 113 122 122 130 140 140 140 166 166 166 166 115 125 125 135 141 142 144 167 1 69 167 1 69 5 7 63 9 6.5 83 12 10,5 16,5 14,5 14.5 329 17 320 17 X 330 17 331 17 302 17 322 17 332 17 303 17 313 17 323 17 323 17 B 85 125 140 140 150 1 60 1 60 1 60 190 190 1 90 97 1 O0 1 O0 1 O0 103 102 101 113 1

40、o9 108 97 99 99 1 O0 1 O0 1 O0 1 O0 104 104 104 116 125 127 130 140 138 135 165 151 1 57 131 131 131 140 150 150 150 176 176 176 120 134 135 144 1 50 152 1 54 176 179 177 5 6 7 7 5 5 9 6 6 8 5 8 6,s 10 63 83 13 10,5 16,5 14.5 1,5 1,5 13 2 2 2 2 3 3 3 329 18 330 18 331 18 302 18 322 18 332 18 303 18

41、313 18 323 18 320 ia x 90 130 145 145 160 170 170 170 200 200 200 102 105 104 106 110 108 107 118 114 115 102 104 1 04 105 107 107 107 1 o9 1 o9 1 o9 121 130 131 138 149 145 144 172 157 166 123 136 136 1 50 1 58 1 58 158 186 186 186 125 140 139 1 54 1 59 161 163 184 187 186 5 6 7 8 5 5 9 6 6 8 5 8 6

42、3 11 7,5 83 14 11,5 17,5 16,5 13 2 2 23 3 3 3 4 4 4 1,5 1 ,5 1 ,5 2.5 2,5 2,5 2 3 3 3 329 19 320 19 X 330 19 331 19 302 19 322 19 332 19 303 19 313 19 323 19 95 140 150 150 165 180 180 180 21 5 21 5 215 1 o9 1 o9 108 111 116 114 112 127 121 1 23 107 1 o9 1 o9 110 112 112 112 114 114 114 131 134 135

43、142 157 154 151 184 168 177 131 141 141 1 55 1 68 1 68 1 68 20 1 201 20 1 135 144 143 1 59 1 68 171 172 197 202 200 5 6 7 8 5 5 10 6 7 8 5 8 65 12 8 10 15 12,5 21,5 17,5 15 2 2 2,s 3 3 3 4 4 4 329 20 320 20 X 330 20 331 20 302 20 322 20 332 20 303 20 313 20 X 323 20 1 O0 (cor iued) Page 8 DIN 5418 T

44、able 3 (continued) - Ca min. - 5 6 7 9 6 5 10 7 7 9 5 7 7 9 6 6 8 7 9 6 7 6 9 6 7 10 9 9 6 8 8 7 7 8 9 6 8 7 9 8 8 9 7 8 9 8 9 9 a - ob min. 140 154 153 169 177 180 182 206 21 1 209 145 163 161 174 187 190 220 224 222 - - cb min. 5 9 9 12 9 10 16 12.5 22 18,5 Bearing bore diameter, d 105 110 1 20 13

45、0 140 150 1 60 170 da max. 114 116 116 116 122 1 20 117 132 127 128 118 122 123 121 1 29 126 141 135 137 128 131 132 133 140 136 152 145 148 141 144 143 152 146 1 64 157 1 50 1 53 152 1 63 1 59 176 169 162 164 1 64 175 171 189 181 - db min. - 112 115 115 115 117 117 117 119 119 119 117 120 120 120 1

46、22 122 124 124 124 D 145 160 160 175 190 190 190 225 225 225 150 170 170 180 200 200 240 240 240 165 180 180 200 21 5 21 5 260 260 260 i ao 200 200 230 230 280 280 190 21 o 21 o 250 250 300 300 Symbol min. 135 143 145 150 165 161 1 59 193 176 185 - max. 136 1 50 1 50 165 178 178 21 1 21 1 21 1 141 1

47、 60 1 60 170 - i 78 i aa i aa 226 226 226 - 170 170 190 203 203 246 246 246 171 190 190 21 6 21 6 262 262 181 200 200 236 236 282 282 - 213 213 256 256 302 302 329 21 320 21 X 330 21 331 21 302 21 322 21 332 21 303 21 313 21 X 323 21 329 22 320 22 X 330 22 331 22 302 22 322 22 303 22 313 22 X 323 22

48、 329 24 320 24 X 330 24 331 24 302 24 322 24 303 24 313 24 X 323 24 329 26 320 26 X 330 26 302 26 322 26 303 26 313 26 X 329 28 320 28 x 330 28 302 28 322 28 303 28 313 28 X 329 30 320 30 X 330 30 302 30 322 30 303 30 313 30 X 5 9 10 13 9 10 12,5 25 19,5 140 152 152 155 174 170 206 188 198 154 161 1

49、60 172 187 181 221 203 21 3 167 178 178 203 193 239 21 8 177 187 186 21 9 21 o 255 235 194 200 200 234 226 273 251 204 21 3 252 242 290 6 9 10 14 9,5 11,5 13,5 26 21,5 7 11 12 9.5 13.5 14,5 28 7 11 12 9,5 13,5 14,5 30 8 12 13 11 17 17 32 127 130 130 130 132 132 134 1 34 134 139 140 140 144 144 148 149 150 150 154 1 54 1 58 1 58 1 60 162 162 164 1 64 1 68 1 68 170 172 174 174 178 i 48 160 173 171 192 20 1 204 237 244 239 173 192 192 21 7 219 255 26 1 184 202 202 234 273 238 280 202 216 21 7 250 254 292 300 21 2 231 269 274 310 222 249 288 294 329 1.5 2 2 3 3 4 4 13 2 2 3 3 4 4 2 25 23