CLC TS 50083-2-3-2018 Cable networks for television signals sound Signals and interactive services - Part 2-3 LTE (4G) Interference Mitigation Filters.pdf

《CLC TS 50083-2-3-2018 Cable networks for television signals sound Signals and interactive services - Part 2-3 LTE (4G) Interference Mitigation Filters.pdf》由会员分享，可在线阅读，更多相关《CLC TS 50083-2-3-2018 Cable networks for television signals sound Signals and interactive services - Part 2-3 LTE (4G) Interference Mitigation Filters.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Cable networks for television signals, sound signals and interactive servicesPart 2-3: LTE (4G) Interference Mitigation FiltersPD CLC/TS 50083-2-3:2018TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKAT

2、ION CLC/TS 50083-2-3 March 2018 ICS 33.060.40 English Version Cable networks for television signals, sound Signals and interactive services - Part 2-3: LTE (4G) Interference Mitigation Filters Rseaux de distribution par cbles pour signaux de tlvision, signaux de radiodiffusion sonore et services int

3、eractifs - Partie 2-3 : Filtres dattnuation du brouillage pour les rseaux LTE (4G) Kabelnetze fr Fernsehsignale, Tonsignale und interaktive Dienste - Teil 2-3: LTE (4G) Filter zur Vermeidung von Strungen This Technical Specification was approved by CENELEC on 2017-12-25. CENELEC members are required

4、 to announce the existence of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulg

5、aria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

6、 Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploi

7、tation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. CLC/TS 50083-2-3:2018 E National forewordThis Published Document is the UK implementation of CLC/TS 50083-2-3:2018.The UK participation in its preparation was entrusted to Technical Committee EPL/100/4, Cable distri

8、bution equipment and systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution

9、 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 98776 2ICS 33.060.40Compliance with a British Standard cannot confer immunity from legal obligations.This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrig

10、enda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CLC/TS 50083-2-3:2018TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50083-2-3 March 2018 ICS 33.060.40 English Version Cable networks for television signals, sound Signals and interactive services - P

11、art 2-3: LTE (4G) Interference Mitigation Filters Rseaux de distribution par cbles pour signaux de tlvision, signaux de radiodiffusion sonore et services interactifs - Partie 2-3 : Filtres dattnuation du brouillage pour les rseaux LTE (4G) Kabelnetze fr Fernsehsignale, Tonsignale und interaktive Die

12、nste - Teil 2-3: LTE (4G) Filter zur Vermeidung von Strungen This Technical Specification was approved by CENELEC on 2017-12-25. CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate fo

13、rm. It is permissible to keep conflicting national standards in force. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,

14、Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotech

15、nique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. CLC/TS 50083-2-3:2018 E PD CLC/TS 50083-2-3:2018CLC/TS 500

16、83-2-3:2018 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms, definitions and abbreviations . 5 3.1 Terms and definitions 5 3.2 Abbreviations . 6 4 LTE Filter Characteristics . 6 4.1 General 6 4.2 Pass-band and stop-band of a LTE filter (800 M

17、Hz band) 6 4.3 Types of standard for a LTE filter 7 4.4 LTE filter specifications 7 4.5 Connections, EMC, environmental and other factors 8 4.5.1 Connections . 8 4.5.2 EMC Screening effectiveness . 8 4.5.3 DC and 50 Hz line power considerations . 8 4.5.4 Climate and operating temperature range . 8 4

18、.5.5 Drop test . 9 4.5.6 Fixings 9 4.6 Information to be supplied by the manufacturer or responsible vendor 9 Annex A (informative) Signal protection from LTE signals 10 A.1 Frequency allocation of LTE signals in the 800 MHz band . 10 A.2 LTE-UE field strength in the 800 MHz band 10 A.3 LTE-BS field

19、 strength in the 800 MHz band 11 PD CLC/TS 50083-2-3:2018CLC/TS 50083-2-3:2018 (E) 3 European foreword This document (CLC/TS 50083-2-3:2018) has been prepared by CLC/TC 209 “Cable networks for television signals, sound signals and interactive services”. Attention is drawn to the possibility that som

20、e of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. PD CLC/TS 50083-2-3:2018CLC/TS 50083-2-3:2018 (E) 4 Introduction Standards and deliverables of EN 60728 series and EN 50083 series deal with ca

21、ble networks including equipment and associated methods of measurement for headend reception, processing and distribution of television and sound signals and for processing, interfacing and transmitting all kinds of data signals for interactive services using all applicable transmission media. These

22、 signals are typically transmitted in networks by frequency-multiplexing techniques. This includes for instance: a) regional and local broadband cable networks; b) extended satellite and terrestrial television distribution systems; c) individual satellite and terrestrial television receiving systems

23、; and all kinds of equipment, systems and installations used in such cable networks, distribution and receiving systems. The extent of this standardization work is from the antennas and/or special signal source inputs to the headend or other interface points to the network up to the terminal input o

24、f the customer premises equipment. The standardization work will consider coexistence with users of the RF spectrum in wired and wireless transmission systems. The standardization of any user terminals (i.e. tuners, receivers, decoders, multimedia terminals etc.) as well as of any coaxial, balanced

25、and optical cables and accessories thereof is excluded. PD CLC/TS 50083-2-3:2018CLC/TS 50083-2-3:2018 (E) 5 1 Scope This Technical Specification provides requirements to passive filters intended to reduce RF interference from LTE Base Stations (LTE-BS) and LTE User Equipment (LTE-UE) to receiving eq

26、uipment and cable distribution systems of broadcast DVB-T and DVB-T2 signals in the VHF and UHF bands. While primarily intended to be used with VHF/UHF DVB-T and DVB-T2 receivers and signal distribution systems, filters can also be useful for mitigation of interference to VHF FM or DAB radio. 2 Norm

27、ative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any a

28、mendments) applies. EN 50083-2:2012, Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment EN 60529:1991, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN 60728-11, Cable networks for television s

29、ignals, sound signals and interactive services Part 11: Safety (IEC 60728-11) EN 61169-2, Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 (IEC 61169-2) EN 61169-24, Radio-frequency connectors - Part 24: Sectional specification - Radio fr

30、equency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) (IEC 61169-24) 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databa

31、ses for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1.1 bandwidth width of a frequency band over which a given characteristic of an equipment or transmission channel d

32、oes not differ from its reference value by more than a specified amount or ratio 3.1.2 pass-band frequency band throughout which the attenuation is less than a specified value 3.1.3 stop-band frequency band throughout which the attenuation is greater than a specified value PD CLC/TS 50083-2-3:2018CL

33、C/TS 50083-2-3:2018 (E) 6 3.2 Abbreviations For the purposes of this document, the following abbreviations apply. BS Base Station DC direct current EMC electromagnetic compatibility LTE long term evolution RF radio frequency MATV Master Antenna Television TV television UHF ultra high frequency UE us

34、er eqipment VHF very high frequency 4 LTE Filter Characteristics 4.1 General To comply with this specification a filter shall pass a range of frequencies (the pass-band) which includes a number of VHF and UHF TV channels and shall attenuate a range of LTE frequencies (the stop-band). In all cases th

35、e stop-band lies above the pass-band. 4.2 Pass-band and stop-band of a LTE filter (800 MHz band) Pass-band (terrestrial broadcasting service): a) the lower boundary of the pass-band shall lie between 0 Hz (DC) and 174 MHz; b) the upper boundary of the pass-band shall lie on the upper edge of a TV ch

36、annel, UHF channel N, such that the pass-band upper bound frequency is (8*N+310) MHz. The value of N shall be in the range 58 to 60. It should be noted that a filter of the band-stop (or band-reject) type can be used to meet this specification. Where this type of filter is used, the range of frequen

37、cies lying above the defined stop-band is not considered to be part of the pass-band for the purpose of this specification. NOTE 1 What the filter does above 862 MHz might be advantageous and could offer some roll-off in the 900 MHz mobile spectrum, but this is outside the scope of this specificatio

38、n. Stop-band: shall be from 791 MHz to 862 MHz, divided in two parts: 1) Stop-band 1: 791 MHz to 821 MHz (LTE Base Station (LTE-BS) 2) Stop-band 2: 832 MHz to 862 MHz (LTE User Equipment (LTE-UE) NOTE 2 It is intended to add an extended stop-band option in a future revision of this specification, al

39、lowing the option to cover the proposed 700 MHz LTE band once the extent of that band is agreed. PD CLC/TS 50083-2-3:2018CLC/TS 50083-2-3:2018 (E) 7 4.3 Types of standard for a LTE filter Three types of standard for a LTE filter are defined, considering the stop-band attenuation performance, as defi

40、ned below. a) Standard 1 LTE filter “Professional” filter for use in large cable systems incorporating distribution amplifiers and/or where greater attenuation of LTE interference is required in the case that channel 60 is not distributed. b) Standard 2 LTE filter “Consumer” filter intended for use

41、with a single receiver or a number of receivers fed via a passive distribution network. c) Standard 3 LTE filter “Typical” filter for use in MATV systems incorporating distribution amplifiers and/or where a typical attenuation for LTE interference mitigation is required. 4.4 LTE filter specification

42、s The nominal characteristic impedance for the LTE filters is 75 , to be used also in measurements. The main LTE filter characteristics are specified in Table 1. Table 1 LTE filter specifications Parameter Requirement Note Standard 1 filter Standard 2 filter Standard 3 filter Pass-band (excluding an

43、y band edge relaxation) 1 UHF channel N 58 59 59 Insertion loss 1,5 dB 2,0 dB 1,5 dB 2 Input/output return loss 16 dB 14 dB 16 dB 3 Maximum amplitude response variation within channel N UHF 4 dB 6 dB 4 dB 4 Maximum group delay variation within channel N UHF 50 ns 50 ns 50 ns 4 Pass-band (optional ba

44、nd edge relaxation) aUHF channel N 59 60 60 Insertion loss 4,0 dB 5,0 dB 4,0 dB 2 Input/output return loss 12 dB 10 dB 12 dB 3 Maximum amplitude response variation within channel N UHF 6 dB 8 dB 6 dB 4 Maximum group delay variation within channel N UHF 250 ns 250 ns 250 ns 4 Stop-band1 (791 MHz to 8

45、21 MHz)(LTE-BS) Insertion loss 55 dB 25 dB 30 dB 2 Stop-band2 (832 MHz to 862 MHz)(LTE-UE) Insertion loss 30 dB 15 dB 15 dB 2 PD CLC/TS 50083-2-3:2018CLC/TS 50083-2-3:2018 (E) 8 aThe relaxed figures given may be applied optionally to the upper part of the pass-band. The extent of the relaxed band, i

46、f used, shall not exceed 8 MHz. NOTE 1: The pass-band is defined less the amount of any upper band edge relaxation used (see footnote a.). NOTE 2: Insertion loss is measured between a matched source and load (impedance 75 ), equivalent to |S21| in S-parameter terms. NOTE 3: Return loss (equivalent t

47、o |S11| or |S22)| is measured at the input and output ports; the output port is intended to be connected to the receiver. NOTE 4: The maximum variation is intended in the 8 MHz band around the centre frequency of channel N UHF. 4.5 Connections, EMC, environmental and other factors 4.5.1 Connections

48、A Standard 1 filter and a Standard 3 filter shall be fitted with two female IEC type connectors complying with EN 61169-2 or two female Type-F connectors complying with EN 61169-24. A screw terminal capable of accepting a 4 mm2stranded conductor shall also be provided to facilitate protective equipo

49、tential bonding in accordance with EN 60728-11. A Standard 2 filter shall have an input port marked with the letter A and an output port marked with the letter B intended for direct connection to a receiver or similar equipment. The A port may be either a female Type-F connector complying with EN 61169-24, or a female IEC type 9,52-connector complying with EN 61169-2. The B port shall consist of a male IEC type 9,52-connector complying with EN 61169-2 and mounted on a flexible coaxia