CLC TR 62453-515-2009 Field device tool (FDT) interface specification - Part 515 Communication implementation for common object model - IEC 61784 CPF 15《现场装置工具(FDT)接口规范 第515部分 公共对象.pdf

《CLC TR 62453-515-2009 Field device tool (FDT) interface specification - Part 515 Communication implementation for common object model - IEC 61784 CPF 15《现场装置工具(FDT)接口规范 第515部分 公共对象.pdf》由会员分享，可在线阅读，更多相关《CLC TR 62453-515-2009 Field device tool (FDT) interface specification - Part 515 Communication implementation for common object model - IEC 61784 CPF 15《现场装置工具(FDT)接口规范 第515部分 公共对象.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 515: Communication implementation for common object model - IEC 61784 CPF 15PD CLC/TR 62453-515:2009National forewordThis Publ

2、ished Document is the UK implementation of CLC/TR 62453-515:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this committee can be obtained onr

3、equest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62574 9ICS 25.040.40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal obligat

4、ions.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDPD CLC/TR 62453-515:2009TECHNICAL REPORT CLC/TR 62453-515 RAPPORT TECHNIQUE TECHNISCHER BERICHT

5、 November 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any me

6、ans reserved worldwide for CENELEC members. Ref. No. CLC/TR 62453-515:2009 E ICS 25.040.40; 35.100.05; 35.110 English version Field device tool (FDT) interface specification - Part 515: Communication implementation for common object model - IEC 61784 CPF 15 (IEC/TR 62453-515:2009) Spcification des i

7、nterfaces des outils des dispositifs de terrain (FDT) - Partie 515: Implmentation des communications pour le modle objet commun - CEI 61784 CPF 15 (CEI/TR 62453-515:2009) Field Device Tool (FDT) -Schnittstellenspezifikation - Teil 515: Kommunikationsimplementierung mit dem allgemeinen Objektmodell (

8、COM) -Kommunikationsprofilfamilie (CPF) 15 nach IEC 61784 (IEC/TR 62453-515:2009) This Technical Report was approved by CENELEC on 2009-10-01. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Ge

9、rmany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. PD CLC/TR 62453-515:2009CLC/TR 62453-515:2009 - 2 - Foreword The text of document 65E/71/C

10、DV, future edition 1 of IEC/TR 62453-515, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as CLC/TR 62453-515 on 2009-10-01. This standa

11、rd is to be used in conjunction with EN 62453-3xy series. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Technical Report IEC/TR 62453-515:2009 was approved by CENELEC as a Technical Report without any modification. In the official version, for Bibliography, the following n

12、ote has to be added for the standard indicated: IEC 61158-5-15 NOTE Harmonized as EN 61158-5-15:2008 (not modified). _ PD CLC/TR 62453-515:2009- 3 - CLC/TR 62453-515:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The follow

13、ing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by

14、 common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61131-3 -1)Programmable controllers - Part 3: Programming languages EN 61131-3 20032)IEC 61784-2 -1) Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for re

15、al-time networks based on ISO/IEC 8802-3 EN 61784-2 20082)IEC 62453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidance EN 62453-1 2009 IEC 62453-2 2009 Field device tool (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 2009 IEC/

16、TR 62453-41 2009 Field device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model CLC/TR 62453-41 2009 IEC 62453-315 2009 Field device tool (FDT) interface specification - Part 315: Communication profile integration - IEC 61784 CPF 15 EN 62453-315 200

17、9 _ 1)Undated reference. 2)Valid edition at date of issue. PD CLC/TR 62453-515:2009 2 TR 62453-515 IEC:2009(E) CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, definitions, symbols, abbreviated terms and conventions 7 3.1 Terms and definitions 7 3.2 Symbols and abbreviated terms.

18、7 3.3 Conventions 7 3.3.1 Data type names and references to data types 7 3.3.2 Vocabulary for requirements7 4 Bus category 7 5 Access to instance and device data7 6 Protocol specific usage of general data types.7 7 Protocol specific common data types8 8 Network management data types8 8.1 General .8

19、8.2 Modbus device address - FDTModbusAddressSchema8 9 Communication data types - FDTModbusCommunicationSchema.9 10 Channel parameter data types - FDTModbusChannelParameterSchema 17 11 Device identification .19 11.1 Device type identification data types - FDTModbusIdentSchema .19 11.2 Topology scan d

20、ata types - DTMModbusDeviceSchema20 11.3 Scan identification data types - FDTModbusScanIdentSchema21 11.4 Device type identification data types - FDTModbusDeviceTypeIdentSchema.23 11.5 XSLT Transformation 24 Bibliography30 Figure 1 Part 515 of the IEC 62453 series .5 Table 1 Protocol specific usage

21、of general data types8 PD CLC/TR 62453-515:2009TR 62453-515 IEC:2009(E) 5 INTRODUCTION This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) components for function control and data access within a client/server architecture. The specification is a result of

22、an analysis and design process to develop standard interfaces to facilitate the development of servers and clients by multiple vendors that need to interoperate seamlessly. With the integration of fieldbusses into control systems, there are a few other tasks which need to be performed. In addition t

23、o fieldbus- and device-specific tools, there is a need to integrate these tools into higher-level system-wide planning- or engineering tools. In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous definition of engineerin

24、g interfaces that are easy to use for all those involved is of great importance. A device-specific software component, called DTM (Device Type Manager), is supplied by the field device manufacturer with its device. The DTM is integrated into engineering tools via the FDT interfaces defined in this s

25、pecification. The approach to integration is in general open for all kind of fieldbusses and thus meets the requirements for integrating different kinds of devices into heterogeneous control systems. Figure 1 shows how IEC/TR 62453-515 is aligned in the structure of IEC 62453 series. Part 515Communi

26、cationimplementationfor common object model IEC 61784 CPF 15Figure 1 Part 515 of the IEC 62453 series PD CLC/TR 62453-515:2009 6 TR 62453-515 IEC:2009(E) FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 515: Communication implementation for common object model IEC 61784 CPF 15 1 Scope IEC/TR 624

27、53-515, which is a technical report, provides information for integrating IEC 61784-2 CPF 15 (Modbus TCP) and Modbus Serial Line1)protocol support into FDT systems based on COM implementation. This part is to be used in conjunction with IEC/TR 62453-41. NOTE This part of IEC 62453 only specifies the

28、 mapping of Modbus parameters to FDT data types. For restrictions of protocol specific parameters concerning allowed values and concerning limitations of arrays used in the definition of FDT data types, refer to IEC 61158-5-15 and the MODBUS Application Protocol Specification. This part of IEC 62453

29、 specifies communication and other services. This specification neither contains the FDT specification nor modifies it. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated

30、references, the latest edition of the referenced document (including any amendments) applies. IEC 61131-3, Programmable controllers Part 3: Programming languages IEC 61784-2, Industrial communication networks Profiles Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-

31、3 IEC 62453-1:2009,Field Device Tool (FDT) interface specification Part 1: Overview and guidance IEC 62453-2:2009,Field Device Tool (FDT) interface specification Part 2: Concepts and detailed description IEC/TR 62453-41:2009, Field Device Tool (FDT) interface specification Part 41: Object model inte

32、gration profile Common object model IEC 62453-315:2009, Field Device Tool (FDT) interface specification Part 315: Communication profile integration IEC 61784 CPF 15 1)Modbus is the trademark of Schneider Automation Inc. It is registered in the United States of America. This information is given for

33、the convenience of users of this International Standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trademark Modbus. Use of the trademark Modbus requires permission from Schneider Automation Inc

34、.PD CLC/TR 62453-515:2009TR 62453-515 IEC:2009(E) 7 3 Terms, definitions, symbols, abbreviated terms and conventions 3.1 Terms and definitions For the purpose of this document, the terms and definitions given in IEC 62453-1, IEC 62453-2 and the following apply. 3.2 Symbols and abbreviated terms For

35、the purpose of this document, the symbols and abbreviations given in IEC 62453-1, IEC 62453-2 and the following apply. CP Communication Profile IEC 61784-1 CPF Communication Profile Family IEC 61784-1 3.3 Conventions 3.3.1 Data type names and references to data types The conventions for naming and r

36、eferencing of data types are explained in IEC 62453-2 Clause A.1 3.3.2 Vocabulary for requirements The following expressions are used when specifying requirements. Usage of “shall” or “Mandatory” No exceptions allowed. Usage of “should” or “Recommended” Strong recommendation. It may make sense in sp

37、ecial exceptional cases to differ from the described behavior. Usage of “can or “Optional Function or behavior may be provided, depending on defined conditions. 4 Bus category IEC 61784 CPF 15 protocol is identified by the attribute definition busCategory as specified in IEC 62453-315 (protocol iden

38、tifiers). 5 Access to instance and device data Used at methods: IDtmParameter:GetParameters() IDtmParameter:SetParameters() These methods shall provide access to at least to all parameters defined in the IEC 62453-315. 6 Protocol specific usage of general data types Table 1 shows how general data ty

39、pes are used with IEC 61784 CPF 15 devices. PD CLC/TR 62453-515:2009 8 TR 62453-515 IEC:2009(E) Table 1 Protocol specific usage of general data types Attribute Description for use fdt:address fdt:protocolId fdt:deviceTypeId fdt:deviceTypeInformation fdt:deviceTypeInformationPath fdt:manufacturerId f

40、dt:semanticId fdt:applicationDomain fdt:tag All these attributes of the FDTDatatype schema are used as defined in IEC 62453-315. 7 Protocol specific common data types This clause specifies the protocol specific common data types, which are used in the definition of other data types. 8 Network manage

41、ment data types 8.1 General The data types specified in this clause are used at following methods: IDtmParameter:GetParameters IDtmParameter:SetParameters 8.2 Modbus device address - FDTModbusAddressSchema The address of a Modbus device is available at the element . PD CLC/TR 62453-515:2009TR 62453-

42、515 IEC:2009(E) 9 9 Communication data types - FDTModbusCommunicationSchema The data types specified in this clause are used with the methods of IFdtCommunication. PD CLC/TR 62453-515:2009 10 TR 62453-515 IEC:2009(E) PD CLC/TR 62453-515:2009TR 62453-515 IEC:2009(E) 11 PD CLC/TR 62453-515:2009 12 TR

43、62453-515 IEC:2009(E) PD CLC/TR 62453-515:2009TR 62453-515 IEC:2009(E) 13 PD CLC/TR 62453-515:2009 14 TR 62453-515 IEC:2009(E) PD CLC/TR 62453-515:2009TR 62453-515 IEC:2009(E) 15 PD CLC/TR 62453-515:2009 16 TR 62453-515 IEC:2009(E) PD CLC/TR 62453-515:2009TR 62453-515 IEC:2009(E) 17 10 Channel param

44、eter data types - FDTModbusChannelParameterSchema The data types specified in this clause are used with the following methods: IFdtChannel:GetChannelParameters() IFdtChannel:SetChannelParameters() PD CLC/TR 62453-515:2009 18 TR 62453-515 IEC:2009(E) PD CLC/TR 62453-515:2009TR 62453-515 IEC:2009(E) 1

45、9 11 Device identification 11.1 Device type identification data types - FDTModbusIdentSchema PD CLC/TR 62453-515:2009 20 TR 62453-515 IEC:2009(E) 11.2 Topology scan data types - DTMModbusDeviceSchema Used at IDtmEvents:OnScanResponse() PD CLC/TR 62453-515:2009TR 62453-515 IEC:2009(E) 21 11.3 Scan id

46、entification data types - FDTModbusScanIdentSchema This schema defines the XML document provided by a scan response of a Modbus network. PD CLC/TR 62453-515:2009 22 TR 62453-515 IEC:2009(E) PD CLC/TR 62453-515:2009TR 62453-515 IEC:2009(E) 23 11.4 Device type identification data types - FDTModbusDevi

47、ceTypeIdentSchema This subclause defines data types that are used to protocol specific information for device types. PD CLC/TR 62453-515:2009 24 TR 62453-515 IEC:2009(E) 11.5 XSLT Transformation PD CLC/TR 62453-515:2009TR 62453-515 IEC:2009(E) 25 Modbus not applicable Vendor Name PD CLC/TR 62453-515

48、:2009 26 TR 62453-515 IEC:2009(E) Product Code MajorMinorRevision not applicable not applicable not applicable ModbusSerial ModbusTCP PD CLC/TR 62453-515:2009TR 62453-515 IEC:2009(E) 27 Modbus not applicable not applicable PD CLC/TR 62453-515:2009 28 TR 62453-515 IEC:2009(E) Vendor Name Product Code MajorMinorRevision PD CLC/TR 62453-515:2009