CSA T568 1-2-2005 Commercial building telecommunications cabling standard Part 1 General requirements Addendum 2 Grounding and bonding specifications for screened balanced twist.pdf

《CSA T568 1-2-2005 Commercial building telecommunications cabling standard Part 1 General requirements Addendum 2 Grounding and bonding specifications for screened balanced twist.pdf》由会员分享，可在线阅读，更多相关《CSA T568 1-2-2005 Commercial building telecommunications cabling standard Part 1 General requirements Addendum 2 Grounding and bonding specifications for screened balanced twist.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、 T568.1-2-05(ANSI/TIA-568-B.1-2-2003)Commercial building telecommunications cabling standard Part 1: General requirements Addendum 2 Grounding and bonding specifications for screened balanced twisted-pair horizontal cabling CSA Standard T568.1-2-05 (ANSI/TIA-568-B.1-2-2003) Commercial building telec

2、ommunications cabling standard Part 1: General requirements Addendum 2 Grounding and bonding specifications for screened balanced twisted-pair horizontal cabling Published in May 2005 by Canadian Standards Association A not-for-profit private sector organization 5060 Spectrum Way, Suite 100, Mississ

3、auga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044 Visit our Online Store at www.ShopCSA.ca Commercial building telecommunications cabling standard Part 1: General requirements Addendum 2 Grounding and bonding T568.1-2-05 specifications for screened balanced twisted-pair horizontal cabling CSA

4、/2 Canadian Standards Association May 2005 T568.1-2-05 Commercial building telecommunications cabling standard Part 1: General requirements Addendum 2 Grounding and bonding specifications for screened balanced twisted-pair horizontal cabling CSA Preface This is the first edition of CSA T568.1-2, Com

5、mercial building telecommunications cabling standard Part 1: General requirements Addendum 2 Grounding and bonding specifications for screened balanced twisted-pair horizontal cabling. This Standard is an adoption of the identically titled ANSI/TIA (American National Standards Institute/Telecommunic

6、ations Industry Association) Standard 568-B.1-2-2003 and is the product of the Telecommunications Industry Association TR-42 Technical Committee, which included a number of Canadian members in order to ensure that Canadian perspectives and requirements were addressed. It is written in SI (metric) un

7、its with yard/pound (imperial) units in parentheses. This Standard has been adopted with no technical deviations. Where code requirements or regulations necessitate changes from US to Canadian references, they should be made by the user, as follows: (a) Throughout this Standard, replace the term “Am

8、erican” with “Canadian”, as applicable. (b) Throughout this Standard, replace the term “state” with “provincial or territorial”, as applicable. (c) Throughout this Standard, replace “NEC” with “CE Code, Part I” (Canadian Electrical Code), as applicable. In addition, (i) where reference is made to “c

9、onduit”, replace it with “conduit/EMT” (electrical metallic tubing) because, in accordance with the Canadian Electrical Code, Part I, EMT is not considered a type of conduit; and (ii) the definitions of the following terms are to be taken from the Canadian Electrical Code, Part I: “Bonding”, “Ground

10、”, and “Raceway”. (d) Throughout this Standard, where reference is made to “FCC”, replace it with “CRTC” (Canadian Radio-television and Telecommunications Commission), or “Industry Canada”, as applicable. (e) The following Standards, published by the Canadian Standards Association, are adoptions of

11、TIA/EIA Standards. The requirements of these CSA Standards take precedence over the TIA/EIA Standards on which they are based; any reference in CSA T568.1-2 to the TIA/EIA Standard is to be replaced by a reference to the equivalent Canadian Standard: (i) T568.1-05, Commercial building telecommunicat

12、ions cabling standard Part 1: General requirements; and Commercial building telecommunications cabling standard Part 1: General requirements Addendum 2 Grounding and bonding T568.1-2-05 specifications for screened balanced twisted-pair horizontal cabling May 2005 Canadian Standards Association CSA/3

13、 (ii) T568.2-05, Commercial building telecommunications cabling standard Part 2: Balanced twisted-pair cabling components. (f) Throughout this Standard, replace the term “Listed” with “Approved as applied to electrical equipment”. This Standard was reviewed for Canadian adoption by the CSA Technical

14、 Committee on Telecommunications Wiring Systems, under the jurisdiction of the Strategic Steering Committee on Information and Communications Technology, and has been formally approved by the Technical Committee. A list of the members of the Technical Committee is available upon request. May 2005 Ca

15、nadian Standards Association 2005 All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. TIA material is reprinted with permission. Inquiries regarding this CSA Standard should be addressed to Canadian Standards Associ

16、ation 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 1-800-463-6727 416-747-4044 www.csa.ca TIA STANDARD ANSI/TIA-568-B.1-2-2003 Approved: February 25, 2003 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 2 Grounding and Bonding Speci

17、fications for Screened Balanced Twisted-Pair Horizontal Cabling TIA-568-B.1-2 (Addendum No. 2 to TIA/EIA-568-B.1) FEBRUARY 2003 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance NOTICE TIA Engineering Standards

18、 and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their

19、particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their

20、voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obl

21、igation whatever to parties adopting the Standard or Publication. Further details of the development process are available in the TIA Engineering Manual, located at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm This Standard does not purport to address all safety problems associated w

22、ith its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-4425-AD2-A, formulated under t

23、he cognizance of the TIA TR-42.1 Subcommittee on Commercial Building Telecommunications Cabling.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2003 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. All rights reserved NOTICE OF DISCLAIMER AND LIMITATION OF

24、LIABILITY The document to which this Notice is affixed (the “Document”) has been prepared by one or more Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). TIA is not the author of the Document contents, but publishes and claims copyright to the Docu

25、ment pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.

26、tiaonline.org/standards/sfg/engineering_manual.cfm. TIAs function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). TIA does not evaluate,

27、test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In publishing the Document, TIA disclaims any undertaking to perform any duty owed to or for anyone. The use or practice of contents of this Document may involve the use of intellectual

28、property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder ther

29、eof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, i

30、nspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRI

31、ATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE W

32、ITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO

33、ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEG

34、LIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. PLEASE! DONT VIOLATE THE LAW! This do

35、cument is copyrighted by the TIA and may not be reproduced without prior permission of the Telecommunications Industry Association. For information consult our website at http:/www.tiaonline.org/about/faqDetail.cfm?id=18 Organizations may obtain permission to reproduce a limited number of copies thr

36、ough entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 U.S.A. or call U.S.A. and Canada 1-800-854-7179, International (303) 397-7956 TIA-568-B.1-2 GROUNDING AND BONDING SPECIFICATIONS FOR SCREENED BALANCED TWISTED

37、-PAIR HORIZONTAL CABLING TABLE OF CONTENTS 1 INTRODUCTION.1 2 PURPOSE AND SCOPE.1 3 NORMATIVE REFERENCES .1 4 DEFINITIONS, ACRONYMS parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated. ANSI and TIA

38、 maintain registers of currently valid national standards published by them. ANSI/TIA/EIA-568-B.1, Commercial Building Telecommunications Standard Part 1: General Requirements, 2001 ANSI/TIA/EIA-568-B.2, Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Co

39、mponents, 2001 ANSI/TIA/EIA-569-A, Commercial Building Standard for Telecommunications Pathways and Spaces, 1998 ANSI/TIA/EIA-606-A, Administration Standard for the Telecommunications Infrastructure of Commercial Buildings, 2002 ANSI/TIA/EIA-J-STD-607-A, Commercial Building Grounding (Earthing) & Bo

40、nding Requirements for Telecommunications standard, 2002 4 DEFINITIONS, ACRONYMS & ABBREVIATIONS 4.1 Definitions The generic definitions in this section have been formulated for use by the entire family of telecommunications infrastructure standards. As such, the definitions do not contain mandatory

41、 requirements of the Standard. Specific requirements are found in the normative sections of this Standard. bonding: The permanent joining of metallic parts to form an electrically conductive path that will ensure electrical continuity and the capacity to conduct safely any current likely to be impos

42、ed. bonding conductor: A conductor that interconnects the screened balanced twisted-pair horizontal cabling infrastructure to the telecommunications grounding busbar. earthing: See grounding. effectively grounded: For a definition see the NEC. ground: A conducting connection, whether intentional or

43、accidental, between an electrical circuit (e.g., telecommunications) or equipment and the earth, or to some conducting body that serves in place of earth. grounding: The act of creating a conducting connection, whether intentional or accidental, between an electrical circuit (e.g., telecommunication

44、s) or equipment and the earth, or to some conducting body that serves in place of earth. 1 TIA-568-B.1-2 telecommunications grounding busbar: A common point of connection for telecommunications system and equipment bonding to ground, and located in the telecommunications room or equipment room. 4.2

45、Acronyms and abbreviations EMC Electromagnetic compatibility NRTL Nationally recognized testing laboratory TGB Telecommunications grounding busbar TO Telecommunications outlet 5 GROUNDING CONSIDERATIONS 5.1 Corrections and revisions to ANSI/TIA/EIA-568-B.1 The purpose of this clause is to revise cla

46、use 4.6 of ANSI/TIA/EIA-568-B.1. These revisions are identified in the following text with additions shown in bold italics and deletions shown as strikeout. 4.6 Grounding considerations Grounding systems are an integral part of the signal or telecommunications cabling system that they support. In ad

47、dition to helping protect personnel and equipment from hazardous voltages, a proper grounding system may improve the EMC performance of the reduce electromagnetic interference (EMI) to and from the telecommunications cabling system. Improper grounding can produce induced voltages and those voltages

48、can disrupt other telecommunications circuits. Grounding and bonding shall meet the requirements and practices of applicable authorities or codes. In addition, telecommunications grounding/bonding shall conform to ANSI/TIA/EIA-J-STD-607-A ANSI/TIA/EIA-607 requirements. The screen shield of ScTP cabl

49、es shall be bonded through a conducting path to the telecommunications grounding busbar (TGB) in the telecommunications room (see subclause 10.2.5). Grounding of equipment at the work area is usually accomplished through the ground conductor of the equipment power connection. If present, screen Shield connections to at the work area equipment shall be are accomplished through the screen of an ScTP work area patch cord extending from the TO to the equipment. At the work area end of the horizontal cabling, the voltage measured be