CGSB 98 3-M91-CAN CGSB-1991 Drapeau National Du Canada (Pour Une Seule Occasion)《加拿大国旗(单独场合使用)》.pdf

《CGSB 98 3-M91-CAN CGSB-1991 Drapeau National Du Canada (Pour Une Seule Occasion)《加拿大国旗(单独场合使用)》.pdf》由会员分享，可在线阅读，更多相关《CGSB 98 3-M91-CAN CGSB-1991 Drapeau National Du Canada (Pour Une Seule Occasion)《加拿大国旗(单独场合使用)》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、CAN/CGSB-98.3-M91Reaffirmed December 2002 Reaffirmed May 2012National Flag of Canada (One-event-only use)ICS 03.160National Standard of CanadaCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from I

2、HS-,-,-The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this National Standard of Canada has been developed is a government agency within Public Works and Government Services Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through th

3、e media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research and te

4、sting organizations. Any given standard is developed on the consensus of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada as a national standards-development organization. The standards that it develops and offers as National Standards of Canada co

5、nform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sector

6、s. Both CGSB standards and CGSB national standards are developed in conformance with the policies described in the CGSB Policy Manual for the Development and Review of Standards. CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. Suggestions

7、 for their improvement, which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues an

8、d amendments, and ordering instructions, is found in the CGSB Catalogue, which is published annually and is available without charge upon request. More information is available about CGSB products and services at our Web site www.ongc-cgsb.gc.ca. Although the intended primary application of this sta

9、ndard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be h

10、azardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirem

11、ents prior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB

12、 shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility. Further information on CGSB and its services and standards may be obtained fro

13、m: The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6 The STANDARDS COUNCIL OF CANADA is the coordinating body of the National Standards System, a coalition of independent, autonomous organizations working towards the further development and improvement of volun

14、tary standardization in the national interest. The principal objects of the SCC are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and

15、international trade, and furthering international cooperation in the field of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approval does no

16、t refer to the technical content of the standard; this remains the continuing responsibility of the SDO. A NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers,

17、regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard, which is capable of making a significant and timely contribution to the national interest. Those who have a need to apply standards are encouraged to

18、use NSCs. These standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO, which publishes the standard. The responsibility for approving standards as National Standards of Canada rests with the: Standards Council of Canada 200-270 Albert Street

19、Ottawa, Ontario K1P 6N7 How to order Publications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongctpsgc-pwgsc.gc.ca on the Web www.tp

20、sgc-pwgsc.gc.ca/ongc-cgsb Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NATIONAL STANDARD OF CANADA CAN/CGSB-98.3-M91Reaffirmed December 2002 Reaffirmed May 2012National Flag of Can

21、ada (One-event-only use)NATIONAL STANDARD OF CANADA CAN/CGSB-3.14-2006Prepared by the Approved by the Canadian General Standards Board Standards Council of CanadaPublished May 1991 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 Minister of Supply and Services Canada 1991 No part of

22、 this publication may be reproduced in any form without the prior permission of the publisher.CETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONSFRANAISE ET ANGLAISE.Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking p

23、ermitted without license from IHS-,-,-CAN/CGSB-98.3-M91CANADIAN GENERAL STANDARDS BOARDCommittee on the National Flag of Canada One-event-only use(Voting membership at date of reaffirmation)Chair Horne, L.1University of ManitobaGeneral Interest CategoryBatcheller, J. University of AlbertaCarrick, D.

24、 ConsultantDavie, N. ConsultantGagnon, M. Canadian Heritage/Contracting and Materiel ManagementHong, T. Exova Group Ltd.Izquierdo, V. Textile Technologies CentreZwinkels, J. National Research Council of CanadaProducer CategoryBalne, F. Camor Products Inc.Braverman, S. International Flag & Banner Inc

25、.Dawood, A. Scythes Inc.Francis, J. Tobermory Press Inc.Law, I. Flags UnlimitedRicard Matthews, J. DuPont Canada Inc.Sloane, R. Flag Connection Inc.Taylor, V. Invista (Canada) Co.White, R. Textile ArtcraftUser CategoryFauvelle, C. National Capital CommissionGervais, S. Canadian Heritage/State Ceremo

26、nial and Corporate EventsMacLeod, J. Public Works and Government Services Canada/ Clothing & Textile DivisionMills, R. National Defence/DSSPMPaquette, R. Public Works and Government Services Canada/Contracting & ProcurementWardroper, A. Royal Canadian Mounted PoliceSecretary (non-voting)Grabowski, M

27、. Canadian General Standards BoardAcknowledgment is made for the translation of this National Standard of Canada by the Translation Bureau of Public Works and Government Services Canada.1General interestCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleN

28、o reproduction or networking permitted without license from IHS-,-,-CAN/CGSB-98.3-M91Reaffirmed December 2002 Reaffirmed May 2012Preface to the National Standard of CanadaThis National Standard of Canada has been reaffirmed by the CGSB Committee on the National Flag of Canada One-event-only use. Edi

29、torial changes have been made by the correction of the following paragraphs:8.2.1 The publication referred to in par. 2.1.1 may be obtained from the Canadian General Standards Board, Sales Centre, Gatineau, Canada K1A 1G6. Telephone 819-956-0425 or 1-800-665-2472. Fax 819-956-5740.8.2.2 The publicat

30、ions referred to in par. 2.1.2 may be obtained from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, U.S.A., telephone 610-832-9585, fax 610-832-9555, or from IHS Canada, 1 Antares Drive, Suite 200, Ottawa, Ontario K2E 8C4, telephone 613-237-4250 or 1-800-267-8220, fax 61

31、3-237-4251.Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CAN/CGSB-98.3-M91ReaffirmedDecember 2002 ReaffirmedMay 2012CANADIAN GENERAL STANDARDS BOARDNATIONAL FLAG OF CANADA (ONE-EVEN

32、T-ONLY USE)1. SCOPE1.1 This standard applies to the design, colours and performance of the National Flag of Canada intended for one-event-only use.1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This documen

33、t does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to

34、 its use.2. APPLICABLE PUBLICATIONS2.1 The following publications are applicable to this standard:2.1.1 Canadian General Standards Board (CGSB)CAN/CGSB-4.2 Textile Test Methods:No. 20-M Colourfastness to Water.2.1.2 ASTMD 1729 Practice for Visual Evaluation of Color Differences of Opaque MaterialsE

35、308 Method for Computing the Colors of Objects by Using the CIE System.2.2 Reference to the above publications is to the latest issues unless otherwise specified by the authority applying this standard. The sources for these publications are shown in the Notes section.3. TERMINOLOGY3.1 For the purpo

36、ses of this standard, the following definition will apply:3.1.1 One-event-only use flag A flag which is manufactured for use during a period of time of up to but not exceeding twenty-four hours.4. GENERAL REQUIREMENTS4.1 The flag shall be free from imperfections and blemishes that may affect its app

37、earance.5. DETAILED REQUIREMENTS5.1 Design The flag shall be of the proportions two by length and one by width, containing in its centre a white square the depth of the flag, with a single red maple leaf centred therein, in accordance with Figure 1.1Copyright Canadian General Standards Board Provide

38、d by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-5.2 Colours The red and white colours shall have the following CIE (International Commission on Illumination) colour co-ordinates when measured in accordance with ASTM E 308 using Illum

39、inant D65and the 1964 Standard Observer:Y X YRed 14.6 0.535 0.312White 88.9 0.312 0.3205.3 Colourfastness to Water The flag shall not show change in colour or staining greater than Grey Scale 4 when tested in accordance with CAN/CGSB-4.2 No. 20-M.6. PREPARATION FOR DELIVERY6.1 Unless otherwise speci

40、fied (par. 8.1), preparation for delivery shall conform to normal commercial practice.7. INSPECTION7.1 Sampling Sampling for inspection and testing shall be at the discretion of the inspection authority unless a specific sampling plan is specified (par. 8.1).8. NOTES8.1 Options The following options

41、 must be specified in the application of this standard:a. Packaging and packing details, if other than as specified (par. 6.1)b. Sampling, if a specific plan is required (par. 7.1).8.2 Sources of Referenced Publications8.2.1 The publication referred to in par. 2.1.1 may be obtained from the Canadian

42、 General Standards Board, Sales Unit, Ottawa, Canada K1A 1G6. Telephone (819) 956-0425 or 956-0426. Fax (819) 956-5644.8.2.2 The publications referred to in par. 2.1.2 may be obtained from ASTM, 1916 Race Street, Philadelphia, PA 19103, U.S.A. or from the Standards Council of Canada, Standards Sales

43、 Branch, 350 Sparks Street, Suite 1200, Ottawa, Ontario K1P 6N7.2 CAN/CGSB-98.3-M91Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CAN/CGSB-98.3-M91 3FIGURE 1Design National Flag of CanadaLegendWhite RedCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-