CAN CSA-Z243 184-1992 Information Processing Systems - Open Systems Interconnection - File Transfer Access and Management - Part 5 Protocol Implementation Conformance Statement Pro.pdf

《CAN CSA-Z243 184-1992 Information Processing Systems - Open Systems Interconnection - File Transfer Access and Management - Part 5 Protocol Implementation Conformance Statement Pro.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-Z243 184-1992 Information Processing Systems - Open Systems Interconnection - File Transfer Access and Management - Part 5 Protocol Implementation Conformance Statement Pro.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、National Standard of Canada CAN/CSA-Z243.184-92 (ISO/TEC 8571 -5:1990) Information Processing Systems - Open Systems Interconnection - FiZe Transfer, Access and Management - Part 5: Protocol Implementation Conformance Statement Proforma (Reaffirmed 1997) Prepared by Cunadian Standards Association Ap

2、proved by Standards Council of Conado fSSN 03 7 7-5669 Published in March 7 992 by Canodian Standards Association 7 78 Rexdale Boulevard, Uexdale (Toronto), Ontario, Canada M9 W 7 R3 Technicul Editor= Colin Bordell . Manuging dlfoc Bernard Kelly 0 Canodion Standards Association - 7 992 All rights re

3、served. No part of this publication may be reproduced in any form, in an electronic retrievul system or otherwise, without the prior permission of the publisher. The Canadian Standards Association, which operates under the name SA International (SA), under whose auspices this National Standard has b

4、een produced, was chartered in 191 9 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities. and users - including manufacturers,

5、consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construc

6、tion, and the environment. indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together

7、 form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the A

8、ssociation regularly and continually audits and inspects products that bear the CSA Mark. Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 191 9, the Association has developed the necessary expertise to meet its cor

9、porate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs. For futher info

10、rmation on CSA services, write to CSA International 7 78 Rexdale Boulevard Toronto, Ontario, M9W 1 R3 Canada CSA standards reflect a national consensus of producers Individuals, companies, and associations across Canada The Association offers certification and testing services In addition to its hea

11、d office and laboratory complex in The Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The princ

12、ipal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international c

13、ooperation in the field of standards. has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide to the greatest practicable extent a balance of representation of producers,

14、users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard c

15、onforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited sta n da rds-develo pmen t organization . Those who have a need to apply standards are

16、 encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The responsibility for approving National Standards of Canada rests with the

17、 Standards Council of Canada 45 OConnor Street, Suite 1200 Ottawa, Ontario, K1 P 6N7 Canada A National Standard of Canada is a standard which CSA INTERNATIONAL / - Les norrnes nationales du Canada sont publiees en versions franqaise et anglaise. Although the intended primary application of this Stan

18、dard is stated in its Scope, it is important to note that it remains the responsibility of the users to judge its suitability for their particular purpose. General Instruction No. 1 March 1992 CAN/CSA-Z243.184-92 CSA Standard CANICSA-2243.184-92, Information Processing Systems - Open Systems interco

19、nnection - File Transfer, Access and Management - Port 5: Protocol Implementation Conformance Statement Proforma, consists of 51 pages. form of replacement pages may be issued from time to time; such pages will be mailed automatically to those purchasers who complete and return the attached card.* S

20、ome Standards require frequent revision between editions, whereas others require none at all. It is planned to issue new editions of the Standard, regardless of the amount of revision, at intervals not greater than 5 years. Except in unusual circumstances, replacement pages will not be issued during

21、 the last year of that edition. This card will appear with Cenerul lnstructiun No. 7 only. Although any replacement pages that have been issued will be sold with the Standard, it is for the purchaser to insert them where they apply. The responsibility for ensuring that his or her copy is complete re

22、sts with the holder of the Standard, who should, for the sake of reference, retain those pages which have been replaced. Note: A Generd instruction sheet will uccompuny replucement pages euch time they are issued and will list the latest date of each page of the Standard. This Standard, iike all CSA

23、 Standards, is subject to periodic review, and amendments in the Cut dong dotted line 0 rga nization Address City Provi nce/State Country Postal/Zip Code Canadian Standards Association Consolidated Mailing List 178 Rexdale Bfvd. Rexdale (Toronto), Ontario Canada M9W 1 R3 lnfonnation Processing Syste

24、ms - Open Systems interconnection - File Transfer, Access and Management - Part 5: Protocol implementation Conformance Statement Proforma Contents Technical Committee on Open Systems iv Preface vii Foreword ix Introduction x 1. Scope 7 2. Normative References 7 3. Definitions 2 4. Abbreviations 2 5.

25、 Conventions 2 6. Conformance 2 7. Description of the Proforma 2 7.1 implementation Detail 2 7.2 General IS0 8571 Detail 2 7.3 Syntax Detail 2 7.4 Virtual Fiiestore Detail 2 7.5 File Protocol Detail 3 7.6 Document Type Detail 3 8. Notations Defined for the Proforma 3 8.1 D-Column 3 8.2 !-Column 3 8.

26、3 R-Column 3 8.4 Column Entries 3 9. PlCS Numbers 4 10, Completion of the PICS 4 Annexes A - Protocol Implementation Conformance Statement (PICS) Proforma for OS1 File Transfer, Access and Management (FTAM) 5 B - PlCS Page References 39 March 7 992 CAN/CSA-Z243.7 84-92 Technical Committee on Open sy

27、stems D.A. Sheppard M.J. Anderson C. Ashford J-W. Atwood O.K. Baek C.V. Bochmann 5. Boeyen D. Bonyun H. Boom P.C. Bowie J. Braun B.L. Catley B.S. Colwell J. Costa R*J- Craven j. De Wele J. Demco A. Demour Protocols Standards and C omm un ica ti on In c., Toronto, Ontario Newbridge Networks Corporati

28、on, Kanata, Ontario Bell-Northern Research Ltd., Ottawa, Ontario Con cordia University, Montreal, Quebec IBM Canada laboratory, North York, Ontario Universitg de MontrGaI, Montr4a1, Qu6bec Bell-Northern Research Ltd., Ottawa, Ontario AIT Corporation, Nepean, Ontario 5. R. Systems, St. Laurent, Quebe

29、c Bell Canada, Ottawa, Ontario Bank of Montreal, Willowdale, Ontario Treasury Board Canada, Ottawa, Ontario Protocols Standards and Communication tnc., Bramalea, Ontario Bell-Northern Research ltd., Nepean, Ontario Unite1 Communications, Toronto, Ontario CEAC Computers, Dundas, Ontario CD N ne t Hea

30、dquarters, Vancouver, British Columbia 5 u n Microsyste ms, Vile St. Laurent, Quebec Chairman Associate Associate Associate Associate Associate Associate Associate Associate Associate iV Marcb 7992 Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management -

31、 Purt 5: Protocol lmplementation Conformance Statement Proforma W.S. Ford Bell-Northern Research Ltd., Ottawa, Ontario 1BM Canada Ltd., Markham, Ontario Cori Canada Diffusion lnc., Acton, Ontario Treasury Board Canada, Ottawa, Ontario Associate D.B. Forsyth C. Cori M.D. Harrop M. Islam K. Knightson

32、National Library of Canada, Ottawa, Ontario Govern rn e n t Te lecom mu nica ti on s Agency, Ottawa, Ontario Standards Council of Canada, Ottawa, Ontario University of Ottawa, Ottawa, Ontario Associate D. Langlotz L. Logrippo D. MacKinnon Software Kinetics Ltd., Sti ttsville, Ontario P. Macnaughton

33、Royal Canadian Mounted Police, Ottawa, Ontario W.A. McCrurn Department of Communications - Canada, Ottawa, Ontario 0. Monkewich Associate Associate Department of Communications - Canada Ottawa, Ontario MacDonald Dettwiler and Associates Ltd., Richmond, British Columbia C. Morton C. Piprani Departmen

34、t of National Defence Canada, Ottawa, Ontario Protocols Standards and Communication Inc., Ottawa, Ontario P. Pranschke Asso cia t e 5. Presseau Associate Associate Department of Communications - Canada, Ottawa, Ontario IBM Canada Ltd., North York, Ontario R.L. Sunday K. Torenvlfet E. Tse Department

35、of Communications - Canada, Ottawa, Ontario Teleglobe Canada Inc., Montreal, Quebec Associute LA. Wlddowson Associate Bel I- Nort hern Research Ltd., Ottawa, Ontario V March 1992 CAN/CSA-Z243.7 84-92 D. Young C.D. Bardell vi Unisys Canada inc., North York, Ontario Canadian Standards Association, Rex

36、dale, Ontario S ta ndords Administrator, Nonvoting March 7 992 information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 5: Protocol implementation Conformance Statement Proforma Preface This is the first edition of CSA Standard CAN/CSA-Z243.184, Inf

37、ormation Processing Systems - Open Systems Interconnection - file Transfer, Access and Management - Port 5: Protocol Implementation Conformance Statement Proforma information systems, the exchange of information between information systems, and the sharing of information system resources. The archit

38、ecture underlying this family of Standards is described in the basic reference model for Open Systems Interconnection in CSA Standard CAN3-Z243.100. In terms of this architecture, this Standard defines a service and specifies a protocol within the application layer of the reference model. treated as

39、 files and that may be stored within information systems or passed between them. They define a file sewice and supporting file protocol for transferring files between systems, for accessing components of files stored in remote systems, and for managing files stored in remote systems. following five

40、parts: (a) CAN/CSA-Z243.180, Part 7: Cenerul lntroduction (b) CANjCSA-2243.181, Part 2: Virtual Filestore Definition; (c) CAN/CSA-Z243.182, Part 3: File Service Definition; (d) CAN/CSA-Z243.183, Part 4: File Protocol Specification; and (e) CAN/CSA-Z243.184, Part 5: Protocol Implementation Conformanc

41、e Statement Proforma. These Standards are identical to International Standard IS0 8571 Parts 1, 2, 3, 4, and 5. As a member country of ISO/IEC JTCI, Canada participated actively in this work through the CSA This Standard is part of a family of Standards designed to enable the interconnection of The

42、field of application of these Standards concerns identifiable bodies of information that can be This Series of Standards on File Transfer, Access and Management (FTAM), consists of the Technical Committee on Open Systems which, in addition to its role as a National Standards Committee, is the Canadi

43、an Advisory Committee (CAC) on ISO/IEC JTCI /SC21. This Standard was reviewed and adopted by the CSA Technical Committee on Open Systems under the jurisdiction of the Standards Steering Committee on Information Processing Systems and was formally approved by these Committees. It has been approved as

44、 a National Standard of Canada by the Standards Council of Canada. March 7 992 Notes: (1) Use of the singular in this Standard does not exdude the plural (and vice versa) when the sense allows. (2) Although the intended primary application of this Standard is stated in its Scope, it is important to

45、note that it remains the responsibility of the users of the Standard to judge its suitability for their partkular purpose. (3) CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appropriate committee. (4) Ail enquiries regarding this Standard,

46、 indoding requests for interpretation, should be addressed to Canadian Standards Association, Standards Division, 7 78 Rexdaie Boulevard, Rexdale, Ontario M9W 7 R3. (a) define the problem, making reference to the specific dause, and, where appropnate, indude an illwtrutive sketch; (6) provide un exp

47、lanation of arcurnstances surrounding the actual field condition; and (c) be phrmed where possible to permit a specific “yes“ or “no“ unswer. CSA Sales Promotions or telephone (4 7 6) 74 7-4 7 7 6. Requests for interpretation should Interpretations are published in CSA Information Update. For subroi

48、ption detuiis und a free sample copy, write to March I 992 Foreword IS0 (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardiz- ation. National bodies that are members of IS0 or 1EC participate

49、 in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activ-w. IS0 and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with IS0 and IEC, also take part in the work. tn the field of information technology, IS0 and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft tntemational Standards adopted by the joint technical committee are circulated to national bodies