CAN CSA-M423-M87-1987 Fire Resistant Hydraulic Fluids (Second Edition General Instruction No 1 May 1987).pdf

《CAN CSA-M423-M87-1987 Fire Resistant Hydraulic Fluids (Second Edition General Instruction No 1 May 1987).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-M423-M87-1987 Fire Resistant Hydraulic Fluids (Second Edition General Instruction No 1 May 1987).pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、National Standard of Canada CAN/CSA-M423-A/?87 Fire Resistant Hydraulic Fluids Prepared by Canadian Standards Association Approved by Standards Council of Canada ISSN 031 7-5669 Published in May 1987 by Canadian Standards Association, 178 Rexdale Boulevard, Rexdale (Toronto), Ontario, Canada M9W 1R3

2、. Copyright Canadian Standards Association-1987 All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior permission of the publisher. The Canadian Standards Association, which operates under the name CSA Interna

3、tional (CSA), under whose auspices this National Standard has been produced, was chartered in 191 9 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and

4、certification activities. and users - including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, part

5、icularly in the fields of health, safety, building and construction, and the environment. indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 co

6、mmittee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. in support of and as an extension to its standards development activiti

7、es. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark. Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 191 9, the As

8、sociation has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related ser

9、vices to meet national and international needs. For futher information on CSA services, write to CSA International 178 Rexdale Boulevard Toronto, Ontario, M9W 1 R3 Canada CSA standards reflect a national consensus of producers Individuals, companies, and associations across Canada The Association of

10、fers certification and testing services In addition to its head office and laboratory complex in The Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the further development and improvement of

11、 voluntary standardization in the national interest. The principal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting the consumer, facilitating do

12、mestic and international trade, and furthering international cooperation in the field of standards. has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide to the greatest

13、 practicable extent a balance of representation of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest. Approval of a standar

14、d as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards-development or

15、ganization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The responsibility f

16、or approving National Standards of Canada rests with the Standards Council of Canada 45 OConnor Street, Suite 1200 Ottawa, Ontario, K1 P 6N7 Canada A National Standard of Canada is a standard which CSA INTERNATIONAL / . Les normes nationales du Canada sont publiCes en versions frangaise et anglaise.

17、 Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users to judge its suitability for their particular purpose. General Instruction No. 1CAN/CSA-M424.3-M87May 1987Title: Fire Resistant Hydraulic Fluids

18、Pagination: 19 pages, each dated May 1987To register for e-mail notification about any updates to this publicationgo to www.shopcsa.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2002735.If

19、 you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Contents Contents Technical Committee on Fire Resistant Hydraulic Fluids 4 Preface 5 1. Scope 7 2. Definitions 7 3

20、. Reference Publications 7 4. Requirements 8 4.1 Spray Ignition 8 4.2 Wick (Flammability) 8 4.3 Fluid Stability (For Water-in-Oil Emulsions Only) 8 4.4 Toxicity 8 4.4.1 Acute Toxicity 8 4.4.2 Acute Skin Irritation 8 4.4.3 Acute Eye Irritation 8 4.4.4 Sensitization 9 4.5 Flashpoint 9 5. Tests 9 5.1 P

21、reconditioning (Non-Aqueous Type Hydraulic Fluids Only) 9 5.2 Spray Ignition Test 9 5.2.1 General 9 5.2.2 Equipment 9 5.2.3 Test Procedure 70 5.3 Wick (Flammability) Test 70 5.3.1 General 70 5.3.2 Equipment 77 5.3.3 Preparation for Test 77 5.3.4 Test Procedure 77 5.4 Fluid Stability Test (For Water-

22、in-Oil Emulsions Only) 72 5.4.1 General 72 5.4.2 High Temperature Stability 73 5.4.3 Freeze-Thaw Stability 73 6. Marking 73 Figures 74 Appendices A-OECD Test Guideline No. 404 for Acute Dermal Irritation/Corrosion B-OECD Test Guideline No. 405 for Acute Eye Irritation/Corrosion 78 77 Fire Resistant

23、Hydraulic Fluids May 198 7 3 Technical Committee Technical Committee on Fire Resistant Hydraulic Fluids G.B. Hruska T.G. Carter E.J. Barrette J. Dewulf G.N. George T. Kostek R. McCallum K.J. Mintz M.B. Myers R.A. Nicholls N. Pease C.R. Trenka B. Wiggins J.L. Dixon Cominco Ltd., Pine Point, Northwest

24、 Territories British Columbia Ministry of Energy, Mines and Petroleum Resources, Victoria Eimco Jarvis Clark Company Limited, Burlington, Ontario INCO Limited, Copper Cliff, Ontario H.L. Blachford Ltd., Mississauga, Ontario Commercial Shearing Ltd., Youngstown, Ohio, USA Cominco Ltd.-Potash Operatio

25、n, Vanscoy, Saskatchewan Energy, Mines and Resources Canada, Ottawa, Ontario Century Oils Limited, Hanley, Stoke-on-Trent, England E.F. Houghton Canada Inc., Toronto, Ontario Westar Ltd., Sparwood, British Columbia Ontario Ministry of Labour, Sudbury H.L. Blachford Ltd., Mississauga, Ontario Canadia

26、n Standards Association, Rexdale, Ontario Chairman Vice-chairman Alternate Standards Administrator, Nonvoting The following have made valuable contribution towards the development of this Standard: J.A. Bossert and N.K. Sarin of Energy, Mines and Resources Canada, Ottawa, Ontario; J.R. Harrison and

27、R. Morris of Health and Welfare Canada, Ottawa, Ontario. 4 CAN/CSA-M423-M87 May 1987 Preface Preface This is the second edition of CSA Standard CAN3-M423, now CAN/CSA-M423, Fire Resistant Hydraulic Fluids. It is written in SI (metric units and supersedes the previous edition published in 1984. recog

28、nize the present state of the art, and to permit upgrading of fluids and fluid systems to meet requirements for fire resistance. The categories are described as follows: (a) Category 1: These fluids are the most fire resistant and show no measurable flams persistence in the flammability tests specif

29、ied in this Standard. (b) Category 2: These fluids are not as fire resistant as the fluids in Category 1 but still meet the flammability tests (with longer flame persistence) specified in this Standard. (c) Category 3: These fluids are considerably more fire resistant than mineral oils but are only

30、required to pass the spray flammability test in this Standard. They are usually compatible with systems designed to use mineral oil. of Mines for a Standard to cover the safety aspects of hydraulic fluids, which are used extensively in the hydraulic systems of mining machinery. (a) Clause 4.3, Fluid

31、 Stability: The acceptable oil separatioia for water in oil emulsions has been decreased from 3% to 2%. (b) Clause 4.4, Toxicity: This Clause has been expanded to include detailed criteria on acute toxicity, acute skin irritation, acute eye irritation, sensitization, and chronic toxicity. (c) Clause

32、 5.1, Preconditioning Test: The preconditioning test is now to be carried out only on non-aqueous hydraulic fluids. (d) Clause 5.4.3, Freeze-Thaw Stability Test: The number of cycles of exposure completed in this test has been increased from two cycles to seven cycles. This Standard was prepared by

33、the Technical Committee on Fire Resistant Hydrau!ir Fluids under the jurisdiction of the Standards Steering Committee on Electrical and Mechanical Mine Safety, and was formally approved by these Committees. It has been approved as a National Standard of Canada by the Standards Council of Canada. May

34、 1987 This Standard divides hydraulic fluids into three categories. The reasons for this are to This Standard has been prepared as a result of a request f, ,m the Provincial Inspectors The major changes from the 1984 edition of M423 concst nf the following: Notes: (1) Use of the masculine gender in

35、this Standard is not meant to exclude the feminine gender. Similarly, use of the singular does not exclude the plural (and vice versa) when the sense allows. (2) Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibil

36、ity of the user of the Standard to judge its suitability for his particular purpose. (3) CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appropriate committee. (4) All enquiries regarding this Standard, including requests for interpretation

37、, should be addressed to Canadian Standards Association, Standards Division, 178 Rexdale Boulevard, Rexdale, Ontario M9 W 1 R3. Requests for interpretation should (a) define the problem, making reference to the specific clause, and, where appropriate, include an illustrative sketch: (b) provide an e

38、xplanation of circumstances surrounding the actual field condition; and (c) be phrased where possible to permit a specific “yes” or “no” answer. sample copy, write to CSA Marketing or telephone (416) 747-2292. Interpretations are published in “CSA Information Update”. For subscription details and a

39、free Fire Resistant Hydraulic Fluids May 1987 5 CAN/CSA-M423-M8 7 May 1987 Scope-Definitions-Reference Publications CAN/CSA-M423-M87 Fire Resistant Hydraulic Fluids 1. Scope 1 .I This Standard covers the fire resistance, toxicity, and stability with respect to separation of water-in-oil emulsions of

40、 hydraulic fluids intended for use at mines. 1.2 This Standard covers fluid in the following categories: (a) Category l-fluid that shows no measurable flame persistence (ie, less than 1 s) in either of the flammability tests specified in this Standard; (b) Category 2-fluid that passes both the spray

41、 and wick flammability tests specified in this Standard; (c) Category 3-fluid that passes the spray ignition test specified in this Standard but may not be capable of passing the wick test. 1.3 This Standard does not cover products of combustion or products of thermal degradation from hydraulic flui

42、ds subjected to fire or heating. Note: While the object of this Standard is to establish a reasonable level of fire resistance for hydraulic fluids, it is recognized that any hydraulic fluid may burn under conditions different from those described in this Standard. 2. Definitions 2.1 The following d

43、efinitions apply in this Standard: Fire resistant (as applied to hydraulic fluids)-a fluid that will meet the fire resistance tests specified in this Standard. LD, (median lethal dose) dermal-a statistically derived single dose of a substance that can be expected to cause death in 50% of treated ani

44、mals when applied to the skin. LD, (median lethal dose) oral-a statistically derived single dose of a substance that can be expected to cause death in 50% of treated animals when administered by the oral route. 3. Reference Publications 3.1 This Standard refers to the following publications and wher

45、e such reference is made it shall be to the edition listed below, including all revisions published thereto: CSA Standard B140.2.2-1971 (Reaffirmed 1980), Pressure Atomizing Oil Burner Nozzles. Fire Resistant Hydraulic Fluids May 1987 7 Reference Publications-Requirements ASTM Standard Test Methods

46、for Flash Point by Pensky-Martens Closed Tester. D93-80, 4. Requirements 4.1 Spray Ignition When tested in accordance with Clause 5.2, the continuous burning time of the atomized fluid spray after removal of the ignition source shall not exceed 30 s during any of the ten trials for each test conditi

47、on. If only one trial indicates a burning time in excess of 30 s, the entire spray ignition test procedure shall be repeated and, if there are no burning times in excess of 30 s during the second set of trials, results shall be considered acceptable. 4.2 Wick (Flammability) When tested in accordance

48、 with Clause 5.3, all six results for each of the five exposure times shall be recorded. The average of each set of six results shall not exceed 60 s in continuous burning time. 4.3 Fluid Stability (For Water-in-Oil Emulsions Only) When tested in accordance with Clause 5.4, the oil separation shall

49、not exceed 2% by volume and the water separation shall not exceed 1% by volume in each of the two tests. 4.4 Toxicity 4.4.1 Acute Toxicity 4.4.1.1 For components comprising 10% or greater by weight of the fluid or for the fluid itself, the LD50 (oral) shall be greater than 500 mg/kg body weight (BW) and the LD, (dermal) shall be greater than 1000 mg/kg BW, when tested in an animal assay. 4.4.1.2 For components comprising less than 10% by weight but greater than 1%, the LD, (oral) shall be greater than 50 mg/kg BW and the LD50 (dermal) shall be greater than 200 mg/kg BW when tes