CAN CSA-ISO IEC 14496-4D-2006 Information technology - Coding of audio-visual objects - Part 4 Conformance testing AMENDMENT 4 IPMPX conformance extensions.pdf

《CAN CSA-ISO IEC 14496-4D-2006 Information technology - Coding of audio-visual objects - Part 4 Conformance testing AMENDMENT 4 IPMPX conformance extensions.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO IEC 14496-4D-2006 Information technology - Coding of audio-visual objects - Part 4 Conformance testing AMENDMENT 4 IPMPX conformance extensions.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、 Reference numberISO/IEC 14496-4:2004/Amd.4:2005(E)ISO/IEC 2005Information technology Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 4: IPMPX conformance extensions Technologies de linformation Codage des objets audiovisuels Partie 4: Essai de conformit AMENDEMENT 4: Extensions

2、 de conformit IPMPX International Organization for Standardization (ISO), 2005. All rights reserved. International Electrotechnical Commission (IEC), 2005. All rights reserved. NOT FOR RESALE. Amendment 4:2006 toNational Standard of CanadaCAN/CSA-ISO/IEC 14496-4:06Amendment 4:2005 to International S

3、tandard ISO/IEC 14496-4:2004 has been adopted withoutmodification (IDT) as Amendment 4:2006 to CAN/CSA-ISO/IEC 14496-4:06. This Amendment was reviewedby the CSA Technical Committee on Information Technology (TCIT) under the jurisdiction of the StrategicSteering Committee on Information Technology an

4、d deemed acceptable for use in Canada.December 2006(reaffirmed 2011)ISO/IEC 14496-4:2004/Amd.4:2005(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are em

5、bedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporate

6、d. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a pr

7、oblem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2005 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and m

8、icrofilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 g120 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2005 All right

9、s reservedAmendment 4:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.4:2005(E) ISO/IEC 2005 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardiz

10、ation. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutu

11、al interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordan

12、ce with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standa

13、rd requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 4 to I

14、SO/IEC 14496-4:2004 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information. Amendment 4:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.4:2005(E) ISO/IEC 2005 All rights reserved 1

15、Information technology Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 4: IPMPX conformance extensions Add the following clauses at the end of SNHC section: 9 Conformance for MPEG-4 IPMP Extension 9.1 Introduction This clause is specified for the conformance test of ISO/IEC 1449

16、6-1. In this clause, except where stated otherwise, the following terms are used for practical purposes: The term “System bitstream” means the multiplexed MPEG-4 system stream which has at least IOD and OD stream as specified in ISO/IEC 14496-1. The term IPMP bitstream means an MPEG-4 system bitstre

17、am with information of IPMP Extension protection, including IPMP Descriptor, IPMP Stream, IPMP Tool List. The term IPMP Information means IPMP Descriptor, IPMP Tool List, and IPMP Stream that come from the IPMP bitstream. The term IPMP Data means these IPMP data extended from IPMP_Data_BaseClass or

18、other specific IPMP data to assist IPMP protection, these IPMP Data can be carried in either IPMP Descriptor, IPMP Stream, or IPMP Messages. The term “IPMP Message” means the IPMP messages passed between terminal and IPMP tools via a non-normative messaging interface. The term IPMP terminal means a

19、MPEG-4 terminal with IPMP Extension capability as specified in ISO/IEC 14496-1. If any statement stated in this sub-clause accidentally contradicts a statement or requirement defined in , the text of ISO/IEC 14496-1 prevails. The following sub-clauses specify the normative tests for verifying compli

20、ance of IPMP bitstream, IPMP Data and IPMP Message. Those normative tests make use of test suites and the reference software decoders specified in ISO/IEC 14496-5:2001/AMD4 (MPEG-4 IPMPX reference software) with source code available in electronic format. 9.2 Specification of test IPMP bitstreams 9.

21、2.1 Conformance Requirements IPMP bitstreams shall comply with the specifications in ISO/IEC 14496-1. Amendment 4:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.4:2005(E) 2 ISO/IEC 2005 All rights reserved9.2.2 Tolerance There is no tolerance for IPMP bitstream syntax checking. The diagno

22、sis is pass or fail. 9.2.3 Terminal conformance Each compliant IPMP terminal shall be able to parse and process all compliant IPMP bitstreams. As the implementation of IPMP terminals differs from each other depending on the implementers, the bit-wise comparison of the terminal output with a referenc

23、e output may not work. The judgment should be done from the total behavior of the terminal. 9.2.4 Tool conformance Not applicable. 9.2.5 Test IPMP Bitstream 9.2.5.1 #IPMPBS1 BitStream: MPEG-4 system stream with IOD, BIFS, OD stream, one H.263 visual stream, and one G.723.1 audio stream and IPMP info

24、rmation. Specification: The IPMP information includes: g122g3 Tool List, containing one IPMP Tool ID. g122g3 IPMP Descriptor. The IPMP Tool specified therein is to be loaded before H.263 video decoder. Purpose: g122g3 Verify that the IPMP terminal handles IPMP Tool List, makes sure all required tool

25、s are present before attempting to play the MPEG-4 system stream. g122g3 Verify that the IPMP terminal handles IPMP Descriptor and IPMP Descriptor pointer, and launches the IPMP Tool according to information given in the IPMP Descriptor. 9.2.5.2 #IPMPBS2 BitStream: MPEG-4 system stream with IOD, BIF

26、S, OD stream, one H.263 visual stream, and one G.723.1 audio stream and IPMP information. Specification: The IPMP information includes: g122g3 Tool List, containing two IPMP Tool IDs. g122g3 Two IPMP Descriptors, one for each IPMP Tool. The IPMP Tools are to be loaded before H.263 video decoder and

27、after G.723.1 audio decoder respectively. Purpose: g122g3 Verify that the IPMP terminal handles IPMP Tool List, makes sure all required tools are present before attempting to play the MPEG-4 system stream. g122g3 Verify that the IPMP terminal handles IPMP Descriptor and IPMP Descriptor pointer, and

28、launches the two IPMP Tools according to information given in the IPMP Descriptor. 9.2.5.3 #IPMPBS3 BitStream: MPEG-4 system stream with IOD, BIFS, OD stream, one H.263 visual stream, and one G.723.1 audio stream and IPMP information. Amendment 4:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004

29、/Amd.4:2005(E) ISO/IEC 2005 All rights reserved 3Specification: The IPMP information includes: g122g3 Tool List, containing two IPMP Tool IDs. g122g3 IPMP Tool ES, containing one binary tool. g122g3 Two IPMP Descriptors, one for each IPMP Tool. The IPMP Tools are to be loaded before H.263 video deco

30、der and after G.723.1 audio decoder respectively. Purpose: g122g3 Verify that the IPMP terminal handles IPMP Tool List, makes sure all required tools are present before attempting to play the MPEG-4 system stream. g122g3 Verify that the IPMP terminal handles IPMP Tool ES, makes sure the carried tool

31、 can be assembled and launched correctly. g122g3 Verify that the IPMP terminal handles IPMP Descriptor and IPMP Descriptor pointer, and launches the two IPMP Tools according to information given in the IPMP Descriptor. 9.2.5.4 #IPMPBS4 BitStream: MPEG-4 system stream with IOD, BIFS, OD stream, one H

32、.263 visual stream, and one G.723.1 audio stream and IPMP information. Specification: The IPMP information includes: g122g3 Tool List, containing one IPMP Tool ID. g122g3 IPMP Descriptor. The IPMP Tool specified therein is to be loaded at a global scope (control point=0). The IPMP Descriptor contain

33、s IPMP_RightsData. Purpose: g122g3 Verify that the IPMP terminal handles IPMP Tool List, makes sure all required tools are present before attempting to play the MPEG-4 system stream. g122g3 Verify that the IPMP terminal handles IPMP Descriptor and IPMP Descriptor pointer, and launches the IPMP Tool

34、according to information given in the IPMP Descriptor. The launched IPMP Tool gets its IPMP Descriptor, and processes the contained IPMP_RightsData. 9.2.5.5 #IPMPBS5 BitStream: MPEG-4 system stream with IOD, BIFS, OD stream, one H.263 visual stream, and one G.723.1 audio stream and IPMP information.

35、 Specification: The IPMP information includes: g122g3 Tool List, containing two IPMP Tool IDs. g122g3 Two IPMP Descriptors, one for each IPMP Tool. g122g3 An IPMP Stream carrying IPMP information (In the form of IPMP_Message) for the above two IPMP Tools. Purpose: g122g3 Verify that the IPMP termina

36、l handles IPMP Tool List, makes sure all required tools are present before attempting to play the MPEG-4 system stream. g122g3 Verify that the IPMP terminal handles IPMP Descriptor and IPMP Descriptor pointer, and launches the two IPMP Tools according to information given in the IPMP Descriptor. g12

37、2g3 Verify that the IPMP terminal can route the information carried in IPMP Stream to the targeted IPMP Tool in a timely manner. 9.2.5.6 #IPMPBS6 BitStream: MPEG-4 system stream with IOD, BIFS, OD stream, one H.263 visual stream, and one G.723.1 audio stream and IPMP information. Amendment 4:2006 to

38、CAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.4:2005(E) 4 ISO/IEC 2005 All rights reservedSpecification: The IPMP information includes, g122g3 Tool List, containing two IPMP Tool IDs. g122g3 IPMP Descriptors. The IPMP Tools specified therein are to be loaded at a global scope (control point=0).

39、 The IPMP Descriptor of IPMP_MasterTool contains IPMP_ConnectTool which refers to IPMP_RELTool, and The IPMP Descriptor of IPMP_RELTool contains IPMP_RightsData. Purpose: g122g3 Verify that the IPMP terminal handles IPMP Tool List g122g3 Verify that the IPMP terminal handles IPMP Descriptors and IPM

40、P Descriptor pointers, and launches the IPMP Tools according to information given in the IPMP Descriptors. The launched IPMP_RELTool gets its IPMP Descriptor, and processes the contained IPMP_RightsData. 9.2.5.7 #IPMPBS7 BitStream: MPEG-4 system stream with IOD, BIFS, OD stream, one H.263 visual str

41、eam, and one G.723.1 audio stream and IPMP information. Specification: The IPMP information includes, g122g3 Tool List. containing three IPMP Tool IDs g122g3 Three IPMP Descriptors, one for each IPMP Tool. One IPMP Tool specified therein is to be loaded at t=0 before the video decoder, and the rest

42、two tools containing IPMP_RightsData are to be loaded at t=5sec with a global scope. The IPMP Descriptor of REL Tool contains IPMP_RightsData. Purpose: g122g3 Verify that the IPMP terminal handles IPMP Tool List g122g3 Verify that the IPMP terminal handles IPMP Descriptors and IPMP Descriptor pointe

43、rs, and launches different IPMP Tools at different time according to information given in the IPMP Descriptors. The launched IPMP_RELTool gets its IPMP Descriptor, and processes the contained IPMP_RightsData. 9.2.5.8 #IPMPBS8 BitStream: MPEG-4 system stream with IOD, BIFS, OD stream, one H.263 visua

44、l stream, one G.723.1 audio stream, one IPMP Tool Elementary Stream and IPMP information. Specification: The IPMP information includes, g122g3 Tool List. containing one IPMP Tool ID g122g3 IPMP Tool ES, containing one binary tool. g122g3 One IPMP Descriptors. The IPMP Tool is to be loaded before H.2

45、63 video decoder Purpose: g122g3 Verify that the IPMP terminal handles IPMP Tool List, makes sure all required tools are present before attempting to play the MPEG-4 system stream. g122g3 Verify that the IPMP terminal handles IPMP Tool ES, makes sure the carried tool can be assembled and launched co

46、rrectly. 9.2.5.9 #IPMPBS9 BitStream: MPEG-4 system stream with IOD, BIFS, OD stream, one H.263 visual stream, and one G.723.1 audio stream and IPMP information. Amendment 4:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.4:2005(E) ISO/IEC 2005 All rights reserved 5Specification: The IPMP i

47、nformation includes: g122g3 Tool List, containing one IPMP Tool ID. g122g3 One IPMP Descriptor. The IPMP Tool is to be loaded before G.723 audio decoder g122g3 An IPMP Stream carrying IPMP information (In the form of IPMP_Message) for the above IPMP Tool Purpose: g122g3 Verify that the IPMP terminal

48、 handles IPMP Tool List, makes sure all required tools are present before attempting to play the MPEG-4 system stream. g122g3 Verify that the IPMP terminal handles IPMP Descriptor and IPMP Descriptor pointer, and launches the IPMP Tool according to information given in the IPMP Descriptor. g122g3 Ve

49、rify that the IPMP terminal can route the information carried in IPMP Stream to the targeted IPMP Tool in a timely manner. 9.3 Specification of test IPMP data 9.3.1 Conformance Requirements IPMP Data shall comply with the specifications in ISO/IEC 14496-1. 9.3.2 Tolerance There is no tolerance for IPMP data syntax checking. The diagnosis is pass or fail. 9.3.3 Terminal conformance Some IPMP data is meant to be carried in messages passed between terminal and IPMP Tool, some IPMP data is meant to be carried in IPMP bitstream, while s