CAN CSA-ISO IEC 14496-4C-2006 Information technology - Coding of audio-visual objects - Part 4 Conformance testing AMENDMENT 3 Visual new levels and tools.pdf

《CAN CSA-ISO IEC 14496-4C-2006 Information technology - Coding of audio-visual objects - Part 4 Conformance testing AMENDMENT 3 Visual new levels and tools.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO IEC 14496-4C-2006 Information technology - Coding of audio-visual objects - Part 4 Conformance testing AMENDMENT 3 Visual new levels and tools.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、 Reference numberISO/IEC 14496-4:2004/Amd.3:2005(E)ISO/IEC 2005INTERNATIONAL STANDARD ISO/IEC14496-4Second edition2004-12-15AMENDMENT 32005-04-15Information technology Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 3: Visual new levels and toolsTechnologies de linformation Coda

2、ge des objets audiovisuels Partie 4: Essai de conformit AMENDEMENT 3: Nouveaux niveaux et outils visuels Amendment 3:2006 toNational Standard of CanadaCAN/CSA-ISO/IEC 14496-4:02Amendment 3:2005 to In ternational Standard ISO/IEC 14496-4:2004 has been adopted withoutmodification (IDT) as Amendment 3:

3、2006 to CAN/CSA-ISO/IEC 14496-4:02. This Amendment was reviewedby the CSA Technical Committee on Information Technology (TCIT) under the jurisdiction of the StrategicSteering Committee on Information Technology and deemed acceptable for use in Canada.December 2006 International Organization for Stan

4、dardization (ISO), 2005. All rights reserved. International Electrotechnical Commission (IEC), 2005. All rights reserved. NOT FOR RESALE. Amendment 3:2006 toNational Standard of CanadaCAN/CSA-ISO/IEC 14496-4:06Amendment 3:2005 to In ternational Standard ISO/IEC 14496-4:2004 has been adopted withoutm

5、odification (IDT) as Amendment 3:2006 to CAN/CSA-ISO/IEC 14496-4:06. This Amendment was reviewedby the CSA Technical Committee on Information Technology (TCIT) under the jurisdiction of the StrategicSteering Committee on Information Technology and deemed acceptable for use in Canada.December 2006ISO

6、/IEC 14496-4:2004/Amd.3:2005(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the edi

7、ting. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be

8、 found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at

9、 the address given below. ISO/IEC 2005 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address

10、below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2005 All rights reservedAmendment 3:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/

11、Amd.3:2005(E) ISO/IEC 2005 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the dev

12、elopment of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governm

13、ental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of

14、the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.

15、 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 3 to ISO/IEC 14496-4:2004 was prepared by Joint Technical Committee ISO/IEC JTC 1,

16、 Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information. Amendment 3:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.3:2005(E) ISO/IEC 2005 All rights reserved 1Information technology Coding of audio-visual objects Part 4: Conformance te

17、sting AMENDMENT 3: Visual new levels and tools Add the following subclause at the end of Clause 5: 5.9 Conformance for New Levels of Video Profiles 5.9.1 Specification of the test bitstreams 5.9.1.1 Test Bitstreams General As the bitstreams related to Simple Scalable Profile Level 0 and Advanced Sim

18、ple Profile Level 3b only invoke tools already defined in ISO/IEC 14496-2:2001, reference is made to bitstream definitions of ISO/IEC 14496-4 Visual bitstream specifications. 5.9.1.2 Test Bitstreams 5.9.1.2.1 #SCS-12 Bitstream: Base layer: pv_scs12.bits, enhancement layer: pv_scs12_e.bits Specificat

19、ion: Temporal scalability with P-VOP in the enhancement layer. There is one P-VOP between every two base layer VOPs with ref_select_code = 1. Functional stage: P-VOP temporal prediction from the base layer. Purpose: Verify that the decoder handles P-VOP based temporal scalability. 5.9.1.2.2 #SCS-13

20、Bitstream: Base layer: pv_scs13.bits, enhancement layer: pv_scs13_e.bits Specification: Spatial scalability with temporally corresponding P-VOP in the enhancement layer, with ref_select_code = 3. Functional stage: P-VOP spatial prediction from the base layer. Purpose: Verify that the decoder handles

21、 P-VOP based spatial scalability. 5.9.1.2.3 #SCS-14 Bitstream: base layer: pv_scs14.bits, enhancement layer: pv_scs14_e.bits Specification: Temporal scalability with B-VOP in the enhancement layer. There is one B-VOP between every two base layer VOPs with ref_select_code = 3. Amendment 3:2006 toCAN/

22、CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.3:2005(E) 2 ISO/IEC 2005 All rights reservedFunctional stage: B-VOP temporal prediction from the base layer. Purpose: Verify that the decoder handles B-VOP based temporal scalability. 5.9.1.2.4 #SCS-15 Bitstream: Base layer: pv_scs15.bits, enhancement l

23、ayer: pv_scs15_e.bits Specification: Spatial scalability with temporally corresponding B-VOP in the enhancement layer, with ref_select_code = 0. Functional stage: B-VOP spatial prediction from the base layer. Purpose: Verify that the decoder handles B-VOP based spatial scalability. 5.9.1.2.5 #A1GE-1

24、0 Bitstream: mobile_a1ge10.bits Specification: A series of consecutive progressively coded P-VOPs. As many quarter-sample components as possible in both the horizontal and vertical directions, luminance and chrominance blocks. Number of MB/s and bitrate are the maximum allowed for the profile-and-le

25、vel combination. Maximize number of prediction blocks required to reconstruct a macroblock. Functional stage: Prediction bandwidth. Purpose: Check that decoder handles largest prediction bandwidth with progressively coded P-VOPs including quarter-sample interpolation. This test is similar to Test bi

26、tstream GEQ#3, except that it uses progressive VOPs. 5.9.1.2.6 #A1GE-11 Bitstream: stefan_a1ge11.bits Specification: A series of consecutive progressively coded S(GMC)-VOPs. As many affine warping transformations (no_of_sprite_warping_points=3) with 1/16 pixel accuracy (sprite_warping_accuracy=3) as

27、 possible, luminance and chrominance blocks. Number of MB/s and bitrate are the maximum allowed for the profile-and-level combination. Maximize number of prediction blocks required to reconstruct a macroblock. Functional stage: Prediction bandwidth. Purpose: Check that decoder handles largest predic

28、tion bandwidth with progressively coded S(GMC)-VOPs. This test is similar to Test bitstream GEG#3, except that it uses progressive VOPs. 5.9.1.2.7 #A1GE-12 Bitstream: mobile_a1ge12.bits Specification: A bitstream with a series of consecutive progressively coded B-VOPs with bi-directional macroblock

29、motion compensation. Sequence contains many consecutive B-VOPs. Number of MB/s and bitrate are the maximum allowed for the profile-and-level combination. Use quarter-sample prediction in both the horizontal and vertical directions, for all luminance and chrominance blocks. Maximize number of predict

30、ion blocks required to reconstruct a macroblock. Functional stage: Prediction bandwidth. Purpose: Check that decoder can cope with this case of worst case bandwidth including quarter-sample interpolation. This test is similar to Test bitstream GEQ#1, except that it uses progressive VOPs. Amendment 3

31、:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.3:2005(E) ISO/IEC 2005 All rights reserved 35.9.1.2.8 #A1GE-13 Bitstream: stefan_a1ge13.bits Specification: A bitstream with I-, P- and B-VOPs, with quarter-sample motion vectors that are as large as permitted by the profile-and-level combin

32、ation. Functional stage: Reconstruction of motion vectors, MCP, control. Purpose: Check that decoder implements motion compensation especially for quarter-sample interpolation properly when motion vectors are very large. 5.9.2 Normative Test Suites for Simple Scalable Profile Level 0 and Advanced Si

33、mple Profile Level 3b NOTE Each row represents a single bitstream. A single bitstream is prepared independently of level for static test, while a single bitstream is prepared for each level a profile for dynamic test. Legend: S Bitstream is intended for functional test D Bitstream is intended for dy

34、namic test X Bitstream is for functional and dynamic test Profile Name Categories Bitstream Donated by Bitstream Name Simple Scalable Advanced Simple L0 L3b General SCS-12 PacketVideo pv_scs12.bits X SCS-12_e PacketVideo pv_scs12_e.bits XSCS-13 PacketVideo pv_scs13.bits X SCS-13_e PacketVideo pv_scs

35、13_e.bits XSCS-14 PacketVideo pv_scs14.bits X SCS-14_e PacketVideo pv_scs14_e.bits XSCS-15 PacketVideo pv_scs15.bits X SCS-15_e PacketVideo pv_scs15_e.bits XA1GE-10 Philips mobile_a1ge10.bits X A1GE-11 Philips stefan_a1ge11.bits X A1GE-12 Philips mobile_a1ge10.bits X A1GE-13 Philips stefan_a1ge13.bi

36、ts X Amendment 3:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.3:2005(E) ICS 35.040 ISO/IEC 2005 All rights reserved Copyright Notice This Amendment to the International Standard contains information copyright protected by the International Organization for Standardization (ISO) and the

37、International Electrotechnical Commission (IEC). Except as permitted under the laws of Canada, no extract of this Amendment to the International Standard may be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photocopying, recording, or otherwise,

38、without prior permission from the Stan dards Council of Canada (SCC). Requests for permission to reproduce this Amendment to the International Standard or parts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario

39、K1P 6N7 The Canadian adoption of this Amendment to the International Standard contains information copyright protected by the Canadian Standards Association. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the publisher.

40、 ISO/IEC material is reprinted with permission. Requests for permission to reproduce this adopted Amendment or parts thereof should be addressed to Director, Information Products Canadian Standards Association 5060 Spectrum Way, Suite 100 Mississauga, Ontario L4W 5N6 Copyright violators will be prosecuted to the full extent of the law. PRINTEDIN CANADAIMPRIMEAU CANADA