CAN CSA-ISO IEC 10164-6A-1999 Information Technology - Open Systems Interconnection - Systems Management Log Control Function AMENDMENT 1 Implementation conformance statement prof.pdf

《CAN CSA-ISO IEC 10164-6A-1999 Information Technology - Open Systems Interconnection - Systems Management Log Control Function AMENDMENT 1 Implementation conformance statement prof.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO IEC 10164-6A-1999 Information Technology - Open Systems Interconnection - Systems Management Log Control Function AMENDMENT 1 Implementation conformance statement prof.pdf（33页珍藏版）》请在麦多课文档分享上搜索。

1、Amendment 1:1999 to National Standard of Canada CAN/CSA-ISO/ZEC 101 64-6-95 Amendment 1:1996 to International Standard ISO/IEC 10164-6:1993 has been adopted without modification as Amendment 1:1999 to CAN/CSA-ISO/IEC 10164-6-95. This Amendment was reviewed by the CSA Technical Committee on Informati

2、on Technology (TCIT) under the jurisdiction of the Strategic Steering Committee on Information Technology and deemed acceptable for use in Canada. June 1999 (Reaff i r med 2004) Information technology - Open Systems Interconnection - Systems Management: Log control function AMENDMENT 1 : Implementat

3、ion conformance stat e in en t prof or mas Technologies de /information - interconnexion de systernes ouverts (OSl) - Gestion-s ysternes: Fonction de contrble de journal AMENDEMENT I: Proformes ICs Reference number lSO/lEC 10164-6:1993/Amd.l:1996(E) ISO/IEC 10164-6:1993/Amd.l:1996(E) Foreword IS0 (t

4、he International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of IS0 or IEC participate in the development of International Standards through technical committees

5、established by the respective organization to deal with particular fields of technical activity. IS0 and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with IS0 and IEC, also take part in the work. I

6、n the field of information technology, IS0 and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least

7、75 % of the national bodies casting a vote. Amendment 1 to International Standard ISO/IEC 10164-6 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 2 1, Open systems interconnection, data management and open distributed processing, in collaboration with

8、 ITU-T. The identical text is published as ITU-T Rec. X.73YAmd. 1. 0 ISO/IEC 1996 All rights reserved. Unless otherwise specified, no part of this publication may be repro- duced or utilized in any form or by any means, electronic or mechanical, including photo- copying and microfilm, without permis

9、sion in writing from the publisher. ISO/IEC Copyright Office Case Postale 56 CH-1211 Genkve 20 Switzerland 11 Information technology Open Systems Interconnection Systems Management: Log control functionTechnical Corrigendum 1:2013 (IDT) toAmendment 1:1999 toNational Standard of CanadaCAN/CSA-ISO/IEC

10、 10164-6-95(ISO/IEC 10164-6:1993, IDT)NOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.Standards Update ServiceTechnical Corrigendum 1:2013 to Amendment 1:1999 toCAN/CSA-ISO/IEC 10164-6-95January 2013Title:Information technology Open Systems Interconnection Sy stems Management: Log control funct

11、ionPagination:2 pagesTo register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2411689.If you require assistance, please e-mail techsupportcsagroup.org or call 416

12、-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.INTERNATIONAL STANDARD ISOJIEC 10164-6:1993/Amd.l:.l.996 TECHNICAL CORRIGENDUM 1 Published 1996-I 2-l 5 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MEKLIYHAPOJJHAfi OPfAHM3AlJM

13、5I I-IO CTAHjJAPTM3AMM . ORGANISATION INTERNATIONALE DE NORMALISATION INTERNATIONAL ELECTROTECHNICAL COMMISSION . MEIKjJYHAPOflHAfl 3JlEKTPOTEXHMqECKAFI KOMVlCCMR . COMMISSION LECTROTECHNIOUE NTERNATIONALE Information technology - Open Systems Interconnection - Systems Management: Log control functi

14、on AMENDMENT 1: Implementation conformance statement proformas TECHNICAL CORRIGENDUM 1 Technologies de /information - Interconnexion de systemes ouverts (03) - Gestion-systemes: Fonction de con tr6le de journal AMENDEMENT 7: Proformes KS RECTIFICATIF TECHNIQUE 7 Technical Corrigendum 1 to Internatio

15、nal Standard lSO/IEC 10164-6:1993/Amd.l :I 996 was prepared by Joint Technical Committee lSO/lEC JTC 1, Information technology, Subcommittee SC 21, Open systems intercon- nection, data management and open distributed processing. KS 35.100.70 Ref. No. ISO/IEC 10164-6:1993/Amd.l:l996/Cor.l:1996(E) Des

16、criptors: data processing, information interchange, network interconnection, open systems interconnection, application layer, systems management, management. 0 ISO/IEC 1996 Technical Corrigendum 1:2013 to Amendment 1:1999 to CAN/CSA-ISO/IEC 10164-6-95ISO/IEC 10164-6 : 1993lAmd.l : 1996lCor.l: 1996 (

17、E) INTERNATIONAL STANDARD ITU-T RECOMMENDATION INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEMENT: LOG CONTROL FUNCTION AMENDMENT 1 Implementation conformance statement proformas TECHNICAL CORRIGENDUM 1 1) Annex A In Table A.6 - “PICS Support Summary”, first row referencing,

18、“CCITT Rec. X.730 I ISO/IEC 10164-1, Annex E, SM Application Context”, change the status Jj-om “m” to “0” and add the following note for the corresponding row of this table: “NOTE - The supplier of implementation shall indicate the application contexts supported.” 2) Subclause A.l.3 Add the followin

19、g sentence aBer the line “- Not applicable or out of scope”, and immediately before “NOTES”: “The value of m in the Status column for the receiving of parameters, of tables of type MCS indicates that there is a minimum requirement for the implementation to be able to receive the parameter. The Addit

20、ional information column shall be used to state whether the implementation provides support for more than the minimum requirement.” ITU-T Rec. X.735 (1992)/Amd.l (1995)Kor.l (1996 E) 1 Technical Corrigendum 1:2013 to Amendment 1:1999 to CAN/CSA-ISO/IEC 10164-6-95Blank pageCopyright NoticeThis Amendm

21、ent to the International Standard contains information copyright protected by t he International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Except as permitted under the laws of Canada, no extract of this Amendment to the International Standard ma

22、y be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photocopying, recording, or otherwise, without prior permission from the Standards Council of Canada (SCC). Requests for permission to reproduce this Amendment to the International Standard or pa

23、rts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this Amendment to the International Standard contains information copyright protected by CSA Group. All rights reserved. No

24、part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the publisher. ISO/IEC material is reprinted with permission. Requests for permission to reproduce this adopted Amendment or parts thereof should be addressed to Manager, Sales CSA Group 5060 Spec

25、trum Way, Suite 100 Mississauga, Ontario L4W 5N6Copyright violators will be prosecuted to the full extent of the law.PRINTED IN CANADAIMPRIMEAU CANADA100%CSA Group prints its publications on Rolland Enviro100, which contains 100%recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free ce

26、rtified, and was manufactured using biogas energy.0 ISO/IEC ISO/IEC 10164-6:1993/Amd.l:1996(E) Introduction This amendment includes tables, which document the mandatory and optional management information specific to the Log Control Management Function. This amendment will be used by Profile specifi

27、ers, for example those developing International Standardizes Profiles (ISPs), to specify an explicit subset of capability, which will afford interoperability between implementatations. The tables also include a column for equipment vendors to state the capability of their products in terms of the Pr

28、ofiles or base specification. The table structures comply with the Guidelines for Implementation Conformance Statement Proformas specified in ITU-T Recommendation X.724 I ISO/IEC 10165-6. . 111 Blank pageISOAEC 10164-6:1993/Amd.l:1996(E) INTERNATIONAL STANDARD ITU-T RECOMMENDATION INFORMATION TECHNO

29、LOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEMENT: LOG CONTROL FUNCTION AMENDMENT 1 (to ITU-T Rec. X.735 I ISO/IEC 10164-6) Implementation conformance statement proformas Add the following footnote to the first list item in 2.1: “I) As amended by ITU-T Rec. X.701Kor.2 I ISO/IEC 10040/Cor.2” A

30、dd the following reference to 2. I: “- ITU-T Recommendation X.724 (1993) I ISODEC 10165-6: 1994, Information technology - Open Systems Interconnection - Structure of management information: Requirements and guidelines for implementation conformance statement proformas associated with OSI management.

31、 Add the following references to 2.2: “- CCITT Recommendation X.291 (1992), OSI conformance testing methodology and framework for protocol Recommendations for CCI7T applications - Abstract test suite specification. ISO/IEC 9646-2: 1991, Information technology - Open Systems Interconnection - Conform

32、ance testing methodology and framework - Part 2: Abstract test suite specification. ITU-T Recommendation X.2962), OSI conformance testing methodology and framework for protocol Recommendations for ITU-T applications - Implementation conformance statements. ISOfJEC 9646-7: 1995, Information technolog

33、y - Open System Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements. And then add the following footnote: Presently at the stage of draft. - 2, Apply the following changes to 3.4: Replace “dependent conformance” with “managed object conform

34、ance statement (MOCS)”. Replace “general conformance” with “management information conformance statement (MICS)”. Relabel itemsf) through i) as h) through k) and insert the following new items: “f) MICS proforma; g) MOCS proforma;” Apply the.following change to 3.7: Replace “system conformance state

35、ment” with the following: “a) PICS proforma; b) protocol implementation conformance statement; c) system conformance statement.” Renumber 3.8 as 3.9 and insert the following new subclause: Implementation conformance statement proforma definitions This Recommendation I International Standard makes us

36、e of the following terms defined in ITU-T Rec. X.724 I ISODEC 10165-6: a) b) Management Conformance Summary (MCS); c) MCS proforma; d) MRCS proforma.” Managed Relationship Conformance Statement (MRCS); ITU-T Rec. X.735 (1992)/Amd.l(1995 E) 1 ISO/IEC 10164-6:1993/Amd.l:1996(E) 7) Add the following ab

37、breviations to clause 4: “ICs Implementation Conformance Statement MCS Management Conformance Summary MICS Management Information Conformance Statement MOCS Managed Object Conformance Statement MRCS Managed Relationship Conformance Statement PICS Protocol Implementation Conformance Statement” Replac

38、e clause 13 with the following: “13 Conformance Implementations claiming to conform to this Recommendation I International Standard shall comply with the conformance requirements as defined in the following subclauses. 13.1 Static conformance The implementation shall conform to the requirements of t

39、his Recommendation I International Standard in the manager role, the agent role, or both roles. A claim of conformance to at least one role shall be made in Table A. 1. If a claim of conformance is made for support in the manager role, the implementation shall support at least one management operati

40、on or notification of the log managed object or at least one management operation of a subclass of the log record managed object specified by this Recommendation I International Standard. The conformance requirements in the manager role for those management operations and notifications are identifie

41、d in Table A.3 and further tables referenced by Annex A. If a claim of conformance is made for support in the agent role, the implementation shall support one or more instances of the log managed object class identified in Table A.4. In the agent role, conformance may also be claimed to subclasses o

42、f the log record object class. The implementation shall support the transfer syntax derived from the encoding rules specified in CCITT Rec. X.209 I ISO/IEC 8825 named joint-iso-ccitt asnl( 1) basicEncoding(l) for the abstract data types referenced by the definitions for which support is claimed. NOT

43、E - Prior to the publication of this amendment, this Recommendation I International Standard identified general and dependent conformance classes. A claim of conformance similar to general conformance class can be made by stating support in the manager role, the agent role, or both roles, for the lo

44、g control functional unit in Table A.2. A claim of conformance similar to dependent conformance class can be made by stating support for at least one of the items in Tables A.3 or A.4. 13.2 Dynamic conformance Implementations claiming to conform to this Recommendation I International Standard shall

45、support the elements of procedure and definitions of semantics corresponding to the definitions for which support is claimed. 13.3 Any MCS proforma, MICS proforma, MOCS proforma, and MRCS proforma which conforms to this Recommendation I International Standard shall be technically identical to the pr

46、oformas specified in Annexes A, B, C and D preserving table numbering and the index numbers of items, and differing only in pagination and page headers. The supplier of an implementation which is claimed to conform to this Recommendation I International Standard shall complete a copy of the Manageme

47、nt Conformance Summary (MCS) provided in Annex A as part of the conformance requirements together with any other ICs proformas referenced as applicable from that MCS. An ICs which conforms to this Recommendation I International Standard shall: Management implementation conformance statement requirem

48、ents - - describe an implementation which conforms to this Recommendation I International Standard; have been completed in accordance with the instructions for completion given in ITU-T Rec. X.724 I include the information necessary to uniquely identify both the supplier and the implementation.” ISO

49、/IEC 10165-6; - 2 ITU-T Rec. X.735 (1992)/Arnd.l(1995 E) 9) A.l A.l.l ISO/IEC 10164-6: 1993/Amd.l: 1996(E) Relabel Annexes A and B as E and F respectively, and insert the following annexes: Annex A MCS proforma3) (This annex forms an integral part of this Recommendation I International Standard) Introduction Purpose and structure The Management Conformance Summary (MCS) is a statement by a supplier that identifies an implementation and provides information on whether the implementation claims conformance to any of the listed set of documents that specify conformance