CAN CSA-C22 2 NO 60745-2-14B-2011 Hand-held motor-operated electric tools - Safety - Part 2-14 Particular requirements for planers (Second Edition).pdf

《CAN CSA-C22 2 NO 60745-2-14B-2011 Hand-held motor-operated electric tools - Safety - Part 2-14 Particular requirements for planers (Second Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-C22 2 NO 60745-2-14B-2011 Hand-held motor-operated electric tools - Safety - Part 2-14 Particular requirements for planers (Second Edition).pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、Hand-held motor-operated electric tools Safety Part 2-14: Particular requirements for planersAmendment 2:2011 (MOD) toNational Standard of CanadaCAN/CSA-C22.2 No. 60745-2-14-04(IEC 60745-2-14:2003, MOD)NOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.CSA Standards Update ServiceAmendment 2:2011 toC

2、AN/CSA-C22.2 No. 60745-2-14-04February 2011Title: Hand-held motor-operated electric tools Safety Part 2-14: Particular requirements for planersPagination: 9 pages (iii preliminary and text)To register for e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-mail Se

3、rvices under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2416806.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we

4、protect your personal information.Canadian Standards AssociationAmendment 2:2011 (MOD) to National Standard of CanadaCAN/CSA-C22.2 No. 60745-2-14-04, Second Edition(IEC 60745-2-14:2003, MOD)Underwriters Laboratories Inc.UL 60745-2-14Second EditionAmendment 2Hand-held motor-operated electric tools Sa

5、fety Part 2-14:Particular requirements for planersAmendment publication date: FEBRUARY 25, 2011This amendment is an adoption of IEC Amendment 2 (2010) to publication IEC 60745-2-14, Second Edition (2003).ANSI/UL 60745-2-14-2011 2011Canadian Standards AssociationAll rights reserved. No part of this p

6、ublication may be reproduced in any form whatsoever without the prior permission of the publisher.Amendment 2:2010 to International Standard IEC 60745-2-14:2003 has been adopted with National Differences (MOD) as Amendment 2:2011 to CAN/CSA-C22.2 No. 60745-2-14-04. This Amendment was reviewed by the

7、 CSA Subcommittee on Portable Electric Tools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee.February 2011Copyright

8、 2011 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property

9、 of UL.This ANSI/UL Standard for Safety consists of the Second edition with revisions through February 25, 2011. The most recent designation of ANSI/UL 60745-2-14 as an American National Standard (ANSI) occurred on February 25, 2011. ANSI approval for a standard does not include the Cover Page, Tran

10、smittal Pages, Title Page (front and back), or the Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted

11、via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.FEBRUARY 25, 2011 Amendment 2:2011 to CAN/CSA-C22.2 No. 60745-2-14-04 UL 60745-2-14 iiiCanadian/US National Differe

12、nces8.12.1DV: Delete this National Difference from the Part 2 Standard.Annex 14.DVL: Delete this National Difference from the Part 2 Standard.IEC 60745-2-14Edition 2.0 2010-05INTERNATIONAL STANDARD NORME INTERNATIONALEHand-held motor-operated electric tools Safety Part 2-14: Particular requirements

13、for planers Outils lectroportatifs moteur Scurit Partie 2-14: Rgles particulires pour les rabots IEC60745-2-14:2003/A2:2010 AMENDMENT 2 AMENDEMENT 2 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this public

14、ation may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an e

15、nquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quel

16、que forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur

17、 cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leadi

18、ng global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigen

19、da or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC J

20、ust Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical ter

21、ms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publicatio

22、n or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internat

23、ionales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi

24、. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou rem

25、places. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne

26、au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv

27、/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60745-2-14Edition 2.0 2010-05INTERNATIONAL STANDARD NORME INTER

28、NATIONALEHand-held motor-operated electric tools Safety Part 2-14: Particular requirements for planers Outils lectroportatifs moteur Scurit Partie 2-14: Rgles particulires pour les rabots INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE FICS 25.140.20 PRICE CODECO

29、DE PRIXAMENDMENT 2 AMENDEMENT 2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60745-2-14 Amend. 2 IEC:2010 FOREWORD This amendment has been prepared by IEC committee 116: Safety of hand-held motor-operated electr

30、ic tools. The text of this amendment is based on the following documents: FDIS Report on voting 116/35/FDIS 116/43/RVD Full information on the voting for the approval of this amendment can be found in the report on voting indicated in the above table. This amendment modifies Part 2-14 of IEC 60745 t

31、o ensure its conformity with the fourth edition (2006) of IEC 60745-1, Hand-held motor-operated electric tools Safety Part 1: General requirements. The committee has decided that the contents of the base publication and its amendments will remain unchanged until the stability date indicated on the I

32、EC web site under “http:/webstore.iec.ch” in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. _ 1 Scope Replace the existing text by the following: This clause of Part 1 is applicable except as foll

33、ows: Addition: This standard applies to planers. 3 Definitions Replace the title and existing text of this clause by the following: 3 Terms and definitions This clause of Part 1 is applicable except as follows: 3.101 planer tool intended for removing surface material, equipped with a rotating cuttin

34、g head where the axis of the cutting head is parallel to the base plate Amendment 2:2011 to CAN/CSA-C22.2 No. 60745-2-14-0460745-2-14 Amend. 2 IEC:2010 3 3.102 lift-off device device which keeps the blade(s) from making contact when the planer is placed on a flat surface 3.103 cutting head assembly

35、of blades, cutter block, blade fixing elements, relevant screws and spindle, the whole being ready for working 8 Marking and instructions Replace the existing Subclause 8.12.1 by the following: 8.12.1.1 Addition: Planer safety warnings Wait for the cutter to stop before setting the tool down. An exp

36、osed rotating cutter may engage the surface leading to possible loss of control and serious injury. NOTE The above warning applies only to planers without an automatic closing guard. Hold the power tool by insulated gripping surfaces only, because the cutter may contact its own cord. Cutting a “live

37、“ wire may make exposed metal parts of the power tool “live“ and could give the operator an electric shock. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by your hand or against the body leaves it unstable and may lead to loss of contr

38、ol. 19 Mechanical hazards Replace the existing Subclause 19.1 by the following: 19.1 Addition: For the requirements given in 19.106, 19.107 and 19.108, only the test probe shown in Figure 102 is used. Replace the existing Subclause 19.102 by the following: 19.102 At any depth of cut, the distance “b

39、” (see Figure 101) between the rotating circle of the cutting edges and the trailing edge on the side of the adjustable shoe shall not exceed 5 mm measured radially. Compliance is checked by measurement and by inspection. Add the following new subclause: 19.111 If a lift-off device is provided, it s

40、hall be designed so that it is automatically activated, when the planer is lifted up from a horizontal surface, and Amendment 2:2011 to CAN/CSA-C22.2 No. 60745-2-14-04 4 60745-2-14 Amend. 2 IEC:2010 the blade(s) do not make contact, when the planer is set at maximum depth of cut and placed on a hori

41、zontal surface. Compliance is checked by inspection. Amendment 2:2011 to CAN/CSA-C22.2 No. 60745-2-14-0460745-2-14 Amend. 2 IEC:2010 5 Figure 101 Examples of cutting heads with basic dimensions and clearance distances Replace the existing Figure 101 by the following: IEC 1110/10 Key 1 Fixed shoe 2 A

42、djustable shoe 3 Trailing edge Figure 101 Examples of cutting heads with basic dimensions and clearance distances Amendment 2:2011 to CAN/CSA-C22.2 No. 60745-2-14-04 6 60745-2-14 Amend. 2 IEC:2010 Annex K Battery tools and battery packs Replace the existing text of Annex K by the following: K.1 Addi

43、tion: All clauses of this Part 2 apply unless otherwise specified in this annex. K.8.12.1.1 Replacement of this subclause of Part 2: Planer safety warnings Wait for the cutter to stop before setting the tool down. An exposed rotating cutter may engage the surface leading to possible loss of control

44、and serious injury. NOTE The above warning applies only to planers without an automatic closing guard. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by your hand or against the body leaves it unstable and may lead to loss of control. K

45、.12.4 This subclause of Part 2 is not applicable. Annex L Battery tools and battery packs provided with mains connection or non-isolated sources Replace the existing text of Annex L by the following: L.1 Addition: All clauses of this Part 2 apply unless otherwise specified in this annex. _ Amendment

46、 2:2011 to CAN/CSA-C22.2 No. 60745-2-14-04ICS 25.140.20 Copyright NoticeThis Amendment to the International Standard contains information copyright protected by the International Electrotechnical Commission (IEC). Except as permitted under the laws of Canada, no extract of this Amendment to the Inte

47、rnational Standard may be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photocopying, recording, or otherwise, without prior permission from the Standards Council of Canada (SCC). Requests for permission to reproduce this Amendment to the Interna

48、tional Standard or parts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this Amendment to the International Standard contains information copyright protected by the Canadian S

49、tandards Association. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the publisher. IEC material is reprinted with permission. Requests for permission to reproduce this adopted Amendment or parts thereof should be addressed