BS ISO 18055-1-2004 Photography and imaging - Inkjet media - Classification nomenclature and dimensions - Photo-grade media (paper and film)《摄影和成像 喷墨介质 分类、命名和尺寸 照片级介质(相纸和胶片)》.pdf

《BS ISO 18055-1-2004 Photography and imaging - Inkjet media - Classification nomenclature and dimensions - Photo-grade media (paper and film)《摄影和成像 喷墨介质 分类、命名和尺寸 照片级介质(相纸和胶片)》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 18055-1-2004 Photography and imaging - Inkjet media - Classification nomenclature and dimensions - Photo-grade media (paper and film)《摄影和成像 喷墨介质 分类、命名和尺寸 照片级介质(相纸和胶片)》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 18055-1:2004 Photography and imaging Inkjet media: Classification, nomenclature and dimensions Part 1: Photo-grade media (paper and film) ICS 37.040.20 BS ISO 18055-1:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee o

2、n 28 June 2004 BSI 28 June 2004 ISBN 0 580 43990 9 National foreword This British Standard reproduces verbatim ISO 18055-1:2004 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee CPW/42, Photography, which has the responsibilit

3、y to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standard

4、s Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard do

5、es not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European deve

6、lopments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to v, a blank page, pages 1 to 14, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the documen

7、t was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 18055-1:2004(E) OSI 4002INTERNATIONAL STANDARD ISO 18055-1 First edition 2004-06-01 Photography and imaging Inkjet media: Classification, nomenclature and dimensions Part 1: Photo-grade media (paper an

8、d film) Photographie et image Milieux encreurs: Classification, nomenclature et dimensions Partie 1: Milieux de qualit photographique (papier et film) BSISO180551:2004IS-55081 O1:(4002E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this fil

9、e mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat

10、caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo erimizde for irpnti.gn Evyre caer neeb sah taken to sneeru tha

11、t the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb nevwo. ISO 4002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den

12、yna form ro na ybm ynae,s lecetrinoc ro mecinahcal, inclidung tohpcoiypodna gn micrfoilm, wittuoh repmissii non writign from ietI rehSa Ot tsserdda eh ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 2

13、2 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dnaii ISO 4002 Allr ithgsr esedevrBSISO180551:2004IS-55081 O1:(4002E) I SO 4002 All irthgs ersedevr iiiContents Page Foreword iv Introduction v 1 Scope 1 2 Normative references . 1 3 Terms and definitions. 1 4 Nomenclature a

14、nd classification of types of inkjet medium 2 5 Conditions for measurement of dimensions and thicknesses 3 6 Dimensions 3 7 Thicknesses and grammages 6 8 Squareness and edge straightness (sheet media) 6 9 Core size (roll media) 6 10 Winding parameters (roll media) . 7 11 Package marking. 7 Annex A (

15、informative) Recommended roll lengths . 9 Annex B (informative) Dimensional stability . 10 Annex C (informative) Quantity packaging (sheet media) 11 Annex D (informative) Grammage. 12 Annex E (informative) Inkjet inks, printers and processing. 13 Bibliography . 14 BSISO180551:2004IS-55081 O1:(4002E)

16、 iv I SO 4002 All irthgs ersedevrForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body inte

17、rested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnica

18、l Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the t

19、echnical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. I

20、SO shall not be held responsible for identifying any or all such patent rights. ISO 18055-1 was prepared by Technical Committee ISO/TC 42, Photography. ISO 18055 consists of the following parts, under the general title Photography and imaging Inkjet media: Classification, nomenclature and dimensions

21、: Part 1: Photo-grade media (paper and film) Non-photo-grade media (paper, film and other bases) will be the subject of a future Part 2. BSISO180551:2004IS-55081 O1:(4002E) I SO 4002 All irthgs ersedevr vIntroduction Within the rapidly developing field of inkjet media, there is a need to establish c

22、lear and unambiguous classifications with regard to descriptions of product types, formats/sizes, thicknesses/grammages and general nomenclature. It is important that all participants in the inkjet market, i.e. producers, processing industries, trade and end-users, achieve an agreed, consistent unde

23、rstanding of all these elements of the market. It is the aim of this part of ISO 18055 to establish such an understanding, in respect of photo-grade media. BSISO180551:2004blank 4002:155081OSISBINTENRATIONAL TSANDADR IS-55081 O1:(4002E)I SO 4002 All irthgs ersedevr 1Photography and imaging Inkjet me

24、dia: Classification, nomenclature and dimensions Part 1: Photo-grade media (paper and film) 1 Scope This part of ISO 18055 establishes a classification of photo-grade inkjet papers and films with regard to nomenclature, formats and thickness/grammage. It does not include non-photo-grade media, non-p

25、aper/film media, or media intended solely for laser printing. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document

26、(including any amendments) applies. ISO 1:2002, Geometrical Product Specification (GPS) Standard reference temperature for geometrical product specification and verification ISO 216:1975, Writing paper and certain classes of printed matter Trimmed sizes A and B series ISO 554:1976, Standard atmosphe

27、res for conditioning and/or testing Specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 inkjet printing process of building up an image on a receiving layer by non-contact application of droplets of ink, usually microscopic 3.2 ink

28、jet medium liquid-permeable or -impermeable base (paper or film), the surface of which is rendered capable of receiving and retaining an inkjet image, either by chemical treatment or by means of a suitable receiver layer NOTE Inkjet media is the plural form of this term. 3.3 preferred size industry

29、standard size, as determined by most frequent user demand (number of units) and product volume (square metres) NOTE Designers of new equipment are encouraged to use preferred sizes whenever possible. BSISO180551:2004IS-55081 O1:(4002E) 2 I SO 4002 All irthgs ersedevr3.4 recognized size size that is

30、significant in the industry, but not so generally used that it is selected as preferred size NOTE This category assists the reader to understand the requirements for certain sizes that may have been once preferred and are becoming less popular, or are new and are becoming more popular. 3.5 nominal s

31、ize size reference that appears on product labels and in catalogues 3.6 core physical mass, which serves as the central part of a wound roll of paper or film, that has no fixed flanges at its ends and is generally cylindrical NOTE A flanged, cylindrical core for roll paper or film is called a “spool

32、”. 3.7 resin coated RC coated on both sides of the base (usually paper) with a “resin”, usually polyethylene, to render it water- impermeable NOTE The designation PE (polyethylene) is sometimes used synonymously with RC. 3.8 cast coated coated on the image-receiving side of the paper base with a hig

33、hly viscous mixture of inorganic metal oxides and gelatine or a similar polymer, the whole being then pressed on a highly polished drum for gloss, to give a water-permeable image-receiving layer 3.9 barrier coated water-impermeable polymer layer contained in the base between the paper and ink-receiv

34、ing layers NOTE The barrier layer is often composed of latexes, and is impermeable only to liquid water and dyes; water vapour and solvents may slowly penetrate into the paper pulp. 4 Nomenclature and classification of types of inkjet medium 4.1 Photo-grade medium A photo-grade medium is either pape

35、r or film with an image-receiving layer that, when printed on, can produce image quality comparable with conventional photography, in terms of resolution, graininess, sharpness, tone reproduction and colour reproduction. A photo-grade medium has physical characteristics comparable with conventional

36、photographic media including stiffness, mass, texture and durability, and is generally intended for inkjet printing of photographic images in high-quality and demanding applications. NOTE 1 The above list of physical characteristics is not necessarily exhaustive, and does not preclude other characte

37、ristics becoming important in future products. NOTE 2 The image-receiving layer is usually coated only on one side, and fully retains high volumes of ink without loss of image quality or functionality. An anti-curl layer may be coated on the reverse side. BSISO180551:2004IS-55081 O1:(4002E) I SO 400

38、2 All irthgs ersedevr 3Photo-grade media can be classified into one of the following categories. a) Resin-coated photo-grade paper (RC photo-grade paper) has a water-impermeable resin layer under an imaging layer. Its surface appearance ranges from high gloss to dead matt. b) Barrier-coated photo-gr

39、ade paper has a water-impermeable barrier layer under imaging layer. Its surface appearance ranges from high gloss to dead matt. c) Coated photo-grade paper has a water-permeable layer under imaging layer. It can be cast-coated or micro-ceramic. Its surface appearance ranges from high gloss to dead

40、matt. d) Photo-grade film consists of a generally polymeric, water-impermeable base (substrate) (e.g. polyester, vinyl), coated on one side with an image-receiving layer. It may be coated on the reverse side with an anti-curl layer. There are three categories of photo-grade film as follows. 1) Opaqu

41、e film (white film) has a substrate that is pigmented white (pigment dispersion, voided, or coated with a pigmented layer). It is intended for applications involving reflected illumination. Its surface appearance is usually glossy, but can range from glossy to matt. 2) Translucent film (back-lit fil

42、m) has either a translucent base (achieved by lower pigment loading) or a clear base with slight pigmentation of the imaging layer. It is intended for applications involving transmitted illumination. It can be front-coated (intended for illumination from the non-imaged side) or reverse-coated (inten

43、ded for illumination from the imaged side). Its surface appearance is usually glossy, but can range from glossy to matt 3) Transparent film (clear film or transparency) has an unpigmented substrate, that freely transmits incident illumination. It is intended for viewing by either direct (e.g. back-l

44、it through a diffuser) or indirect (e.g. by projection onto a viewing surface) transmitted light. Its surface appearance is usually glossy, but can range from glossy to matt. 4.2 Non-photo-grade medium A non-photo-grade medium is generally of less high quality than a photo-grade medium, and more sui

45、table for less demanding applications. Some such materials are not even specifically designed for inkjet use. Non- photo-grade media are outside the scope of this International Standard, but have been included here for comparative purposes. 5 Conditions for measurement of dimensions and thicknesses

46、The dimensions and tolerances specified in this part of ISO 18055 apply at the time of manufacture, measured under atmospheric conditions of (23 2) C and (50 5) % relative humidity, as specified in ISO 554:1976 (see Annex B). All measuring instrument calibrations shall be conducted at a temperature

47、of 20 C (as specified in ISO 1) and a relative humidity of 50 %. 6 Dimensions 6.1 Sheet dimensions Aim and tolerance values for preferred dimensions of sheets shall conform to specifications given in Table 1. Aim and tolerance values for recognized dimensions of sheets shall conform to specification

48、s given in Table 2. BSISO180551:2004IS-55081 O1:(4002E) 4 I SO 4002 All irthgs ersedevr6.2 Roll dimensions 6.2.1 Roll widths Preferred roll widths, along with their cutting tolerances, shall conform to the values given in Table 3. For widths of rolls that do not comply with the specifications given

49、in Table 3, they shall conform to the aim and tolerance specifications given in Table 4. 6.2.2 Roll lengths Roll lengths are not specified normatively in this part of ISO 18055. However, in order to encourage a beneficial degree of standardization, recommended roll lengths are given for information in Annex A. The actual length shall be no less than the nominal length, but additional length is left to the di