BS ISO 17069-2014 Accessible design Consideration and assistive products for accessible meeting《无障碍设计 无障碍会议用考量和辅助产品》.pdf
《BS ISO 17069-2014 Accessible design Consideration and assistive products for accessible meeting《无障碍设计 无障碍会议用考量和辅助产品》.pdf》由会员分享,可在线阅读,更多相关《BS ISO 17069-2014 Accessible design Consideration and assistive products for accessible meeting《无障碍设计 无障碍会议用考量和辅助产品》.pdf(28页珍藏版)》请在麦多课文档分享上搜索。
1、BSI Standards PublicationBS ISO 17069:2014Accessible design Consideration and assistiveproducts for accessible meetingBS ISO 17069:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 17069:2014. The UK participation in its preparation was entrusted to Technica
2、lCommittee CH/173, Assistive products for persons with disability. A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicat
3、ion. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 81562 1 ICS 11.180.01; 13.180 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strateg
4、y Committee on 31 October 2014.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e d ISO 2014Accessible design Consideration and assistive products for accessible meetingConception accessible Considrations et produits dassistance pour runion accessibleINTERNATIONAL STANDARDISO 1
5、7069First edition 2014-10-15Reference number ISO 17069:2014(E)BS ISO 17069:2014ISO 17069:2014(E)ii ISO 2014 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2014All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by a
6、ny means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Ge
7、neva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 17069:2014ISO 17069:2014(E) ISO 2014 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Terms and definitions . 13 Planning and management for full participat
8、ion . 23.1 Principle 23.2 Specific considerations and supports . 3Annex A (informative) Guidelines in relation to the process of organizing an accessible meeting 8Annex B (informative) Prior registration form for an accessible meeting .15Bibliography .17BS ISO 17069:2014ISO 17069:2014(E)ForewordISO
9、(the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical comm
10、ittee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrote
11、chnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafte
12、d in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent right
13、s. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitut
14、e an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.The commit
15、tee responsible for this document is ISO/TC 173, Assistive products for persons with disability, Subcommittee SC 7, Accessible design.iv ISO 2014 All rights reservedBS ISO 17069:2014ISO 17069:2014(E)IntroductionThere are various types of meetings, ranging from small gatherings in families, schools,
16、workplaces, and towns, to bigger ones such as academic meetings, sessions in congresses, and international conferences. Participation in meetings is indispensable for full participation and inclusion in society as envisioned in the United Nations Convention on the Rights of Persons with Disabilities
17、.As social participation of older persons and persons with disabilities is promoted, more older persons and persons with disabilities are taking the opportunity to attend meetings. To ensure that all persons can participate in a meeting in a meaningful way, considerations are required to be taken to
18、 overcome any obstacle that can be a hindrance. Printed meeting notices and documents might not be appropriate for a participant who has a seeing impairment or who is blind. Complicated texts might be a hindrance for a person who has a cognitive impairment. Discussions might be difficult to follow f
19、or a participant who has hearing impairment or who is deaf. Narrow passages, gaps, and stairs might be barriers for a person who uses a wheelchair or assistive products for walking. Persons with speech disability might have difficulties expressing themselves in a meeting without any support.Meeting
20、organizers have to understand and address hindrances so that all participants can fully take part in the meeting. Careful planning, support staff, and use of appropriate assistive products can overcome hindrances. Preparation of meeting materials in alternative formats such as large print, braille,
21、or digital formats can facilitate understanding for a person who has seeing impairment or who is blind. Texts that are clear and concise can facilitate understanding for a person with cognitive impairment. Amplification of speech by using microphones can be appropriate support for a person with hear
22、ing impairment. Sign language interpreters can assist a person who is deaf to follow and participate in a discussion. A built environment with elevators and ramps can make an area accessible for a person with mobility limitation.This International Standard identifies areas to consider, as well as su
23、pport and assistive products that can facilitate the full participation of older persons and persons with disabilities in meetings.In this International Standard, considerations and assistive products that can contribute to making a meeting accessible are presented in relation to human abilities. To
24、 facilitate for meeting organizers, Annex A presents detailed guidelines and a checklist in relation to the process of organizing an accessible meeting. ISO 2014 All rights reserved vBS ISO 17069:2014BS ISO 17069:2014Accessible design Consideration and assistive products for accessible meeting1 Scop
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSISO170692014ACCESSIBLEDESIGNCONSIDERATIONANDASSISTIVEPRODUCTSFORACCESSIBLEMEETING 障碍 设计 会议 考量 辅助 产品

链接地址:http://www.mydoc123.com/p-585232.html