BS EN ISO 15611-2003 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience《金属材料焊接程序规范和合格鉴定 根据已有焊接经验进行合格鉴.pdf

《BS EN ISO 15611-2003 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience《金属材料焊接程序规范和合格鉴定 根据已有焊接经验进行合格鉴.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 15611-2003 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience《金属材料焊接程序规范和合格鉴定 根据已有焊接经验进行合格鉴.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 15611:2003 Specification and qualification of welding procedures for metallic materials Qualification based on previous welding experience The European Standard EN ISO 15611:2003 has the status of a British Standard ICS 25.160.10 BS EN ISO 15611:2003 This British Standard

2、was published under the authority of the Standards Policy and Strategy Committee on 24 December 2003 BSI 24 December 2003 ISBN 0 580 43199 1 National foreword This British Standard is the official English language version of EN ISO 15611:2003. It is identical with ISO 15611:2003. It supersedes BS EN

3、 288-6:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/36, Approval testing of welding procedures and welders, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.

4、 Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue o

5、r of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the tex

6、t; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cov

7、er, an inside front cover, the EN ISO title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHE

8、NORM ENISO15611 December2003 ICS25.160.10 SupersedesEN2886:1994 Englishversion Specificationandqualificationofweldingproceduresformetallic materialsQualificationbasedonpreviousweldingexperience (ISO15611:2003) Descriptifetqualificationdunmodeopratoiredesoudage pourlesmatriauxmtalliquesQualifications

9、urlabase delexprienceensoudage(ISO15611:2003) AnforderungundQualifizierungvonSchweiverfahrenfr metallischeWerkstoffeQualifizierungaufgrundvon vorliegenderschweitechnischerErfahrung(ISO 15611:2003) ThisEuropeanStandardwasapprovedbyCENon7May2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalReg

10、ulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversi

11、ons(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,G

12、reece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploit

13、ationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO15611:2003EENISO15611:2003(E) 2 Contents page Foreword3 Introduction .4 1 Scope 5 2 Normativereferences 5 3 Termsanddefinitions. .6 4 Preliminaryweldingprocedurespecifications(pWPS) . 6 5 Qualificationoftheweldingprocedu

14、re .6 6 Existingpreviousweldingexperience .6 7 Rangeofqualification .7 8 Validity 7 9 WeldingProcedureQualificationRecord(WPQR) . 7 Bibliography 8ENISO15611:2003(E) 3 Foreword Thisdocument(ENISO15611:2003)hasbeenpreparedbyTechnicalCommitteeCEN/TC121“Welding“,the secretariat of which is held by DS, i

15、n collaboration with Technical Committee ISO/TC44 “Welding and allied processes“. ThisEuropeanStandardENISO15611:2003shallbegiventhestatusofanationalstandard,eitherbypublication ofanidenticaltextorbyendorsement,atthelatestbyApril2004,andconflictingnationalstandardsshallbe withdrawnatthelatestbyApril

16、2004. ThisdocumentsupersedesEN2886:1994. ThisdocumenthasbeenpreparedunderamandategiventoCENbytheEuropeanCommissionandtheEuropean FreeTradeAssociation. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria

17、,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal, Slovakia,Spain,Sweden,SwitzerlandandtheUnitedKingdom.ENISO15611:2003(E) 4 Introduction InEN ISO15607,oneofthemethodsofweldingprocedurequalificationisbyrelatingtop

18、reviouswelding experience. Manymanufacturershaveconsiderableexperienceinfabricatingweldedstructures.Weldedcomponentsand structuresmayhavebeensuppliedtoendusers/clientsforavarietyofapplicationsandhaveperformed satisfactorilyoveraperiodoftimeinservice.Ifthisexperienceistraceableanddocumentedthisstanda

19、rdprovides aroutetoweldingprocedurequalificationbasedonthisexperience. ThisEuropeanStandardisapartofaseriesofstandards,detailsofthisseriesaregiveninENISO15607:2003, annexA.ENISO15611:2003(E) 5 1Scope ThisEuropeanStandardgivesthenecessaryinformationtoexplaintherequirementsreferencedinENISO15607 about

20、thequalificationofweldingproceduresbasedonpreviousweldingexperience. Inadditionitgivestherangeofqualificationandthevalidity. TheuseofthisEuropeanStandardmayberestrictedbyanapplicationstandardoraspecification. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsf

21、romotherpublications.These normativereferencesarecitedattheappropriateplacesinthetext,andthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelat

22、esteditionofthe publicationreferredtoapplies(includingamendments). ENISO15607:2003, SpecificationandqualificationofweldingproceduresformetallicmaterialsGeneralrules (ISO15607:2003). prENISO156091, SpecificationandapprovalofweldingproceduresformetallicmaterialsWeldingprocedure specificationPart1:Arcw

23、elding(ISO/DIS156091:2000). ENISO156092, SpecificationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure specificationPart2:Gaswelding(ISO156092:2001). prENISO156093, SpecificationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure specificationPart3:Electron

24、beamwelding(ISO/DIS156093:2000). prENISO156094, SpecificationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure specificationPart4:Laserbeamwelding(ISO/DIS156094:2000). prENISO156095, SpecificationandapprovalofweldingproceduresformetallicmaterialsWeldingprocedure specificationPa

25、rt5:Resistancewelding(ISO/DIS156095:2000). ENISO156141, SpecificationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure testPart1:Arcandgasweldingofsteelsandarcweldingofnickelandnickelalloys(ISO156141:2003). prENISO156142, Specificationandapprovalofweldingproceduresformetallicma

26、terialsWeldingprocedure testsPart2:Arcweldingofaluminiumanditsalloys(ISO/DIS156142:2000). prENISO156143, SpecificationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure testsPart3:Weldingproceduretestsforthearcweldingofcastsiron(wassubmittedtoCENEnquiryasprEN 28812). prENISO1561

27、44, SpecificationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure testsPart4:Finishingweldingofaluminiumcastings(wassubmittedtoCENEnquiryasprEN28813). prENISO156145, SpecificationandapprovalofweldingproceduresformetallicmaterialsWeldingprocedure testsPart5:Arcweldingoftitanium

28、,zirconiumandtheiralloys(ISO/DIS156145:2000). prENISO156146, SpecificationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure testPart6:Arcweldingofcopperandcopperalloys. ENISO156148, SpecificationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure testPart8:W

29、eldingoftubestotubeplatejoints(ISO156148:2002).ENISO15611:2003(E) 6 prENISO156149, SpecificationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure testsPart9:Underwaterhyperbaricwetwelding(ISO/DIS156149:2000). prENISO1561410, Specificationandapprovalofweldingproceduresformetalli

30、cmaterialsWeldingprocedure testPart10:Hyperbaricdrywelding(ISO/DIS1561410:2000). ENISO1561411, SpecificationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure testPart11:Electronandlaserbeamwelding(ISO1561411:2002). prENISO1561412, Specificationandapprovalofweldingproceduresform

31、etallicmaterialsWeldingprocedure testsPart12:Spot,seamandprojectionwelding(ISO/DIS1561412:2000). prENISO1561413,SpecificationandqualificationofweldingproceduresformetallicmaterialsWelding proceduretestPart13:Resistancebuttandflashwelding(ISO/DIS1561413:2002). 3 Termsanddefinitions Forthepurposesofth

32、isEuropeanStandard,thetermsanddefinitionsgiveninENISO15607:2003apply. 4 Preliminaryweldingprocedurespecifications(pWPS) ThequalificationofaweldingprocedurerelatedtopreviousweldingexperienceshallbebasedonapWPS accordingtotherelevantpartofprENISO15609.ThispWPSshallspecifytherangeforalltherelevant para

33、meters. 5 Qualificationoftheweldingprocedure Theessentialitemsforthequalificationare: pWPSaccordingtotherelevantpartofprENISO15609; documentationoftheexistingpreviousweldingexperience(seeclause6). 6 Existingpreviousweldingexperience Previousweldingexperienceshallbedemonstratedbydocumentedexamination

34、and/ortestdataandeithera summaryofweldingmanufacturingorsatisfactoryserviceperformance.Thisshallinvolve: a) satisfactorydocumentationcoveringtheessentialpropertiesoftheproductofweldtests(e.g.nondestructive, destructive,leakorpressuretests)inallcases. AND EITHER b) asummaryofweldingmanufacturingofatl

35、eastoneyearduringanappropriateperiod OR c) suitabilityofweldsinserviceforanappropriateperiod. Aperiodoffiveyearsisconsideredasanappropriateperiodunlessotherwisespecified.ENISO15611:2003(E) 7 7 Rangeofqualification Therangeofqualificationgiventoaweldingprocedurequalifiedinaccordancewiththisstandardsh

36、allbeasgiven intheappropriatepartofprENISO15614. 8Validity Thequalifiedweldingprocedurerelatedtopreviousweldingexperienceisvalidasfarastheweldingproductionis carriedoutinthespecifiedrange,seeclause7. 9 WeldingProcedureQualificationRecord(WPQR) TheWPQRshallconsistofdocumentationofexistingpreviousweld

37、ingexperience(seeclause6). TherelevantitemslistedfortheWPSintherelevantpartofprENISO15609shallbeincluded.TheWPQRshallbe signedanddatedbytheexaminerorexaminingbody.ENISO15611:2003(E) 8 Bibliography CRISO15608, WeldingGuidelinesforametallicmaterialgroupingsystem(ISO/TR15608:2000). prENISO156147, Speci

38、ficationandqualificationofweldingproceduresformetallicmaterialsWeldingprocedure testsPart7:Corrosionresistantoverlay,cladding,restoreandhardfacingblankBS EN ISO 15611:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for

39、preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or ed

40、itions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the

41、inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards public

42、ations should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those t

43、hat have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services a

44、re also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online acce