BS EN 13203-4-2016 Gas-fired domestic appliances producing hot water Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and elect.pdf

《BS EN 13203-4-2016 Gas-fired domestic appliances producing hot water Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and elect.pdf》由会员分享，可在线阅读，更多相关《BS EN 13203-4-2016 Gas-fired domestic appliances producing hot water Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and elect.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 13203-4:2016 Gas-fired domestic appliances producing hot water Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13203-4:2016 BRIT

2、ISH STANDARD National foreword This British Standard is the UK implementation of EN 13203-4:2016. The UK participation in its preparation was entrusted to Technical Committee GSE/29, Gas-fired central heating boilers (domestic and non-domestic) and domestic gas-fired water heaters. A list of organiz

3、ations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 201

4、6 ISBN 978 0 580 89230 1 ICS 91.140.65 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2016. Amendments/corrigenda issued since publication Date T e

5、 x t a f f e c t e dBS EN 13203-4:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13203-4 O c t o b e r 2 0 1 6 ICS 91.140.65 English Version Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) produci

6、ng hot water and electricity Appareils domestiques produisant de leau chaude sanitaire utilisant les combustibles gazeux - Partie 4: valuation de la consommation nergtique des appareils gaz de production combine de chaleur et dlectricit (mCHP) produisant de leau chaude et de llectricit Gasbeheizte G

7、erte fr die sanitre Warmwasserbereitung fr den Hausgebrauch - Teil 4: Bewertung des Energieverbrauchs von Gasgerten mit Kraft-Wrme-Kopplung (Mikro-KWK) zur Warmwasserbereitung und Stromerzeugung This European Standard was approved by CEN on 6 August 2016. CEN members are bound to comply with the CEN

8、/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Cen

9、tre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as th

10、e official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nether

11、lands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All righ

12、ts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13203-4:2016 EBS EN 13203-4:2016 EN 13203-4:2016 (E) 2 Contents Page European foreword . 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 General test conditions . 8 4.1 Referen

13、ce conditions . 8 4.2 Measurement uncertainties 8 4.3 Test conditions . 9 4.3.1 General 9 4.3.2 Test room . 9 4.3.3 Water supply . 9 4.3.4 Steady-state . 9 4.3.5 Initial adjustment of the appliance . 9 4.3.6 Electrical supply . 10 4.3.7 Delivered electrical energy 10 5 Determination of the energy co

14、nsumption and electrical energy generation of the appliance . 10 5.1 General . 10 5.2 Tapping cycles . 10 Table 1 Load profile S 12 Table 2 Load profile M . 13 Table 3 Load profile L 14 Table 4 Load profile XL . 15 Table 5 Load profile XXL . 16 Table 6 Load profile 3XL . 17 Table 7 Load profile 4XL

15、. 18 5.3 Measurement of the energy recovered by the useful water . 19 5.4 Calculation of gas energy . 19 5.4.1 Calculation of the daily gas energy consumption in summer mode 19 5.4.2 Calculation of daily gas energy consumption in winter mode . 20 5.4.3 Daily gas energy consumption seasonally weighte

16、d . 20 5.5 Calculation of electrical energy . 21 5.5.1 Calculation of the delivered electrical energy . 21 Figure 1 Electrical measurements Test points 21 5.5.2 Calculation of the produced electrical energy . 23 5.5.3 Calculation of electrical auxiliary energy 24 5.6 Measurement of energy consumptio

17、n and production in standby mode 24 5.6.1 General . 24 5.6.2 Calculation of daily gas energy consumption in standby mode 24 5.6.3 Calculation of daily auxiliary energy in standby mode 25 5.7 Measurement of auxiliaries consumption in off mode . 26 BS EN 13203-4:2016 EN 13203-4:2016 (E) 3 6 Determinat

18、ion of the wasted water . 26 7 Eco design Related Product Data 27 7.1 Water heating energy efficiency 27 7.2 Annual fuel consumption (AFC) 28 7.3 Annual electricity delivery (AED) . 28 Annex A (informative) Examples of test conditions . 30 A.1 Diagrams of test conditions 30 Figure A.1 Initial adjust

19、ment of the appliance with storage tank maintained in temperature 30 Figure A.2 Initial adjustment of the appliance without storage tank maintained in temperature 31 Figure A.3 Tapping cycle Test cycle for measurement of the energy consumption of the appliance with storage tank maintained in tempera

20、ture 32 Figure A.4 Standby mode with control cycles 33 Annex B (informative) Test rig and measurement devices 34 B.1 General . 34 Figure B.1 Example of test rig 34 B.2 Pressure measurement 35 Figure B.2 Example of pressure measurement device . 35 B.3 Temperature measurement . 35 Figure B.3 Example o

21、f temperature measurement device . 36 Figure B.4 Example of position of thermocouples - Method of surfaces 37 Figure B.5 Useful and delivered flow rates and temperatures . 38 Annex C (normative) Test points . 39 Figure C.1 Thermal performances for mCHP systems with combined storage tank for central

22、heating and domestic hot water Test points 39 Figure C.2 Thermal performances for mCHP systems with storage tank for domestic hot water only Test points . 40 Annex ZA (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) n 814/2013 41 Table ZA.1

23、 Correspondence between this European Standard and Commission Regulation (EC) n 814/2013 . 41 Annex ZB (informative) Relationship between this European Standard and the requirements of Commission Regulation n 812/2013 42 Table ZB.1 Correspondence between this European Standard and Commission Regulat

24、ion (EC) n 812/2013 . 42 Annex ZC (informative) Relationship between this European Standard and the requirements of Commission Regulation (EU) n 813/2013 43 Table ZC.1 Correspondence between this European Standard and Commission Regulation (EC) n 813/2013 . 43 Annex ZD (informative) Relationship bet

25、ween this European Standard and the requirements of Commission Delegated Regulation (EU) n 811/2013 . 44 Table ZD.1 Correspondence between this European Standard and Commission Regulation (EC) n 811/2013 . 44 Bibliography . 45 BS EN 13203-4:2016 EN 13203-4:2016 (E) 4 European foreword This document

26、(EN 13203-4:2016) has been prepared by Technical Committee CEN/TC 109 “Central heating boilers using gaseous fuels”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the

27、latest by April 2017, and conflicting national standards shall be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent righ

28、ts This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, B, C or D, which is an integral part of this do

29、cument. The safety operation of the boiler is not covered by this standard. Safety is proved by means of the essential safety requirements of the Gas Appliances Directive 2009/142/EC. This way be achieved by compliance with the appropriate existing harmonized standards. NOTE Useful standards are EN

30、26, EN 89, EN 155021, EN 1550221, EN 1550222 and EN 50465:2015. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Esto

31、nia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13203-4:2016 EN 1

32、3203-4:2016 (E) 5 1 Scope This European Standard is applicable to gas-fired mCHP appliances producing domestic hot water and electricity. The electricity is generated in a process linked to the production of useful heat. It applies to a mCHP appliances marketed as single unit or as a package fully s

33、pecified by a manufacturer that have: a gas heat input not exceeding 70 kW; an electrical output not exceeding 50 kW and a hot water storage capacity not exceeding 500 l. EN 13203-1 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a variety of uses

34、. It also gives a system for presenting the information to the user. The present document sets out a method for assessing the energy performance of gas fired mCHP appliances. It defines a number of daily tapping cycles for each domestic hot water use, kitchen, shower, bath and a combination of these

35、, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user. When the mCHP generator does not supply domestic hot water in the summer period, the present standard is not applicable. EN 13203-2 i

36、s used for performance assessment of these generators. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest

37、edition of the referenced document (including any amendments) applies. EN 13203-1, Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries EN 13203-2, Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption 3

38、Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 storage tank reservoir for domestic hot water and or central heating water 3.2 nominal domestic hot water heat input (Q nw) value of the heat input stated in the appliance instructions for the pro

39、duction of domestic hot water Note 1 to entry: Q nw is expressed in kilowatt (kW) 3.3 summer mode conditions during which the appliance supplies energy only for the production of domestic hot water BS EN 13203-4:2016 EN 13203-4:2016 (E) 6 3.4 winter mode conditions during which the combination mCHP

40、appliance supplies energy for the production of domestic hot water and/or space heating 3.5 domestic water test temperature temperature of the delivered water at which the tests are conducted 3.6 control cycle time cycle for keeping components and/or the storage tank (if any) of the domestic hot wat

41、er circuit at predetermined temperature level, consisting of an ON duration time during which the heating of the domestic hot water (by gas energy and/or auxiliary energy) is operating, and an OFF duration time during which no heating occurs 3.7 useful water quantity of water delivered at the tap fo

42、r which the temperature increase is in accordance with the requirement fixed for each individual delivery of the tapping cycles 3.8 wasted water quantity of water delivered at the tap for which the temperature increase is not in accordance with the requirement fixed for each individual delivery of t

43、he tapping cycles 3.9 standby mode operating state in which the appliance can provide domestic hot water at any time Note 1 to entry: In the case of an appliance with a control cycle for keeping components and/or the storage tank (if any) of the domestic hot water circuit at predetermined temperatur

44、e level no tapping is made. 3.10 off mode state of an appliance, selected by the user, in which domestic hot water cannot be provided 3.11 mCHP appliance appliance which is placed on the market either as a complete package or specified as a complete package to deliver safely and effectively the heat

45、ing, electrical power and the domestic hot water service claimed, comprising as relevant: primary heat and power generator; supplementary heat generator; flue ducts; thermal store 3.12 mCHP generator preferential heat and power generator BS EN 13203-4:2016 EN 13203-4:2016 (E) 7 3.13 supplementary he

46、at generator non-preferential heat source providing peak load 3.14 power conditioning and control system equipment used to change electrical voltage level and waveform, or otherwise alter or regulate the electrical output of the primary heat and power generator to make it suitable and safe for expor

47、t to other components within or outside the appliance including controls used to operate the primary heat and power generator such a gas valve, safety controls and internal cooling pumps 3.15 electric auxiliary energy (E Auxiliary) electric energy consumed by the mCHP appliance components associated

48、 with the supplementary heat generator, thermal management and controls (e.g. pump, fan, valves, control unit) Note 1 to entry: E Auxiliary is expressed in kWh 3.16 produced electrical energy (E CHP) electrical energy produced by the mCHP generator Note 1 to entry: E CHP is expressed in kWh 3.17 del

49、ivered electrical energy (E delivered) electrical energy delivered by the mCHP appliance to the grid Note 1 to entry: E delivered is expressed in kWh 3.18 useful water flow rate flow rate of water delivered at the tap for which the temperature increase is in accordance with the requirement fixed for each individual delivery of the tapping cycles 3.19 useful water temperature water temperature, expressed in degrees Celsius, delivered at the tap 3.20 appliance flow rate flow rate deli