BS EN 3696-2001 Aerospace series - Washers in heat resisting steel《航空航天系列 耐热钢制的垫圈》.pdf

《BS EN 3696-2001 Aerospace series - Washers in heat resisting steel《航空航天系列 耐热钢制的垫圈》.pdf》由会员分享，可在线阅读，更多相关《BS EN 3696-2001 Aerospace series - Washers in heat resisting steel《航空航天系列 耐热钢制的垫圈》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS EN 3696:2001 Washers in heat resisting steel The European Standard EN 3696:2001 has the status of a British Standard ICS 49.025.01 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 3696:2001 This British Standard, having been prepared un

2、der the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 18 October 2001 BSI 18 October 2001 ISBN 0 580 37199 9 National foreword This British Standard is the official English language version of EN

3、 3696:2001. The UK participation in its preparation was entrusted to Technical Committee ACE/12/1, Aerospace Fasteners, Fastening Systems, Details and Parts (International), which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secre

4、tary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards

5、 Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to u

6、nderstand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comp

7、rises a front cover, an inside front cover, the EN title page, pages 2 to 5, and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN369

8、6 September2001 ICS49.030.50 Englishversion AerospaceseriesWashersinheatresistingsteel ThisEuropeanStandardwasapprovedbyCENon20January2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanya

9、lteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmembe

10、rintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKing

11、dom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN3696:2001EEN3696:2001(E) 2 Foreword ThisEuropeanStand

12、ardhasbeenpreparedbytheEuropeanAssociationofAerospaceManufacturers (AECMA). AfterinquiriesandvotescarriedoutinaccordancewiththerulesofthisAssociation,thisStandardhas receivedtheapprovaloftheNationalAssociationsandtheOfficialServicesofthemembercountriesof AECMA,priortoitspresentationtoCEN. ThisEurope

13、anStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidentical textorbyendorsement,atthelatestbyMarch2002,andconflictingnationalstandardsshallbewithdrawnat thelatestbyMarch2002. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countrie

14、sareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark, Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal, Spain,Sweden,SwitzerlandandtheUnitedKingdom.EN3696:2001(E) 3 1 Scope Thisstandardspecifiesthecharacteristicsofwashers,inheatresi

15、stingsteel,foraerospaceapplications. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreferenceprovisionsfromotherpublications. Thesenormativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelisted hereafter.Fordatedreferences,subsequentamendmentstoorrevisio

16、nsofanyofthesepublicationsapplyto thisEuropeanStandardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferences,the latesteditionofthepublicationreferredtoapplies(includingamendments). EN2175 HeatresistingsteelFEPA93HTSolutiontreatedandprecipitationtreatedSheetsand strips a 3mmAerospaceseri

17、es 1) EN2424 AerospaceseriesMarkingofaerospaceproducts EN2516 AerospaceseriesPassivationofcorrosionresistantsteelsanddecontaminationofnickel basealloys EN4317 AerospaceseriesHeatresistingalloyFEPA2601(X6NiCrTiMoV2615)Nonheattreated Forgingstock a or D 200mm 2) EN4318 AerospaceseriesHeatresistingallo

18、yFEPA2601(X6NiCrTiMoV2615)Solutiontreated andprecipitationtreatedBarandsectionD e 100mmR m 960MPa 2) 3 Requiredcharacteristics 3.1 ConfigurationDimensionsMass Accordingtofigure1andtable1 3.2 Surfaceroughness Accordingtofigure1,unlessotherwisespecifiedinthedesigndocumentation. 3.3 Materials According

19、toEN2175,EN4317orEN4318 1) PublishedasAECMAStandardatthedateofpublicationofthisstandard 2) PublishedasAECMAPrestandardatthedateofpublicationofthisstandardEN3696:2001(E) 4 3.4 Surfacetreatment Passivation,accordingtoEN2516 Dimensionsinmillimetres a Areaofmarking Figure1 Table1 Dimensionsinmillimetres

20、 Code a b d 1 d 2 Mass g/piece 0,25 0 0,5 max. 05 10,51 8 01,21 06 12,5 21 01,62 08 14,5 24 02,07 10 1,0 16,5 28 02,91 12 18,5 32 5,80 14 20,5 35 6,84 16 22,5 38 7,98 18 24,5 42 9,89 20 27,5 45 10,78 22 30,5 50 13,36 25 33,5 55 16,19 28 36,5 58 17,28 32 1,5 39,5 63 20,48 a Correspondstothepipenomina

21、loutsidediameter b Tolerancesforwashersmanufacturedfrom sheet:accordingtodimensionalstandards bar:0,1EN3696:2001(E) 5 4 Designation EXAMPLE: Descriptionblock Identityblock WASHER EN369606 Numberofthisstandard Code(seetable1) NOTE:Ifnecessary,thecode I9005shallbeplacedbetweenthedescriptionblockandthe

22、identityblock. 5 Marking AccordingtoEN2424,styleAandfigure1 6 Qualityassurance AccordingtoEN2000BS EN 3696:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on stan

23、dards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality

24、 of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400.

25、BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax

26、: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI

27、provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre.

28、Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001.

29、Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patent

30、s Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary d

31、etails such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.