BS AU 184-1982 Specification for world parts manufacturer identifier code (WPMI) for road vehicles《世界各地道路车辆制造商的标识符号(WMPI)规范》.pdf

《BS AU 184-1982 Specification for world parts manufacturer identifier code (WPMI) for road vehicles《世界各地道路车辆制造商的标识符号(WMPI)规范》.pdf》由会员分享，可在线阅读，更多相关《BS AU 184-1982 Specification for world parts manufacturer identifier code (WPMI) for road vehicles《世界各地道路车辆制造商的标识符号(WMPI)规范》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AUTOMOBILE SERIES BS AU 184:1982 ISO4100:1980 Specification for World parts manufacturer identifier code (WPMI) for road vehicles ISO title: Road vehicles World parts manufacturer identifier (WPMI) code UDC 629.11.01:003.62BSAU184:1982 This BritishStandard, having been prepared unde

2、r the directionof the Automobile Standards Committee, waspublished under the authorityofthe Board of BSI and comes into effect on 31December1982 BSI 02-2000 The following BSI references relate to the work on this standard: Committee reference AUE/15 Draft for comment77/73905 DC ISBN 0 580 13111 4 Na

3、tional foreword This BritishStandard has been prepared under the direction of the Automobile Standards Committee and is identical with ISO4100 “Road vehicles World parts manufacturer identifier (WPMI) code” prepared by Technical Committee ISO/TC22, Road vehicles, and published in1980 by the Internat

4、ional Organization for Standardization (ISO). Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a BritishStandard without deviation. Some terminology and certain conventions are not identical with those used in BritishStandards; atte

5、ntion is especially drawn to the following. Wherever the words “International Standard” appear, referring to this standard, they should be read as “BritishStandard”. There is no BritishStandard corresponding to ISO3833:1977 to which reference is made in clause3. The Technical Committee has reviewed

6、the provisions of that International Standard and has decided that they are acceptable for use in conjunction with this standard. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compl

7、iance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have ha

8、d amendments incorporated. This will be indicated in the amendment table on the inside front cover. Cross-references International Standard Corresponding BritishStandard ISO3780:1976 BS AU175 Vehicle identification numbers (VIN) Part2:1979 Specification for world manufacturer identifier (WMI) codes

9、(Identical) Amendments issued since publication Amd. No. Date of issue CommentsBSAU184:1982 BSI 02-2000 i Contents Page National foreword Inside front cover 1 Scope 1 2 Field of application 1 3 References 1 4 Definitions 1 5 General characteristics of the WPMI code 1 6 Specific characteristics requi

10、red for the characters in the WPMI code 1 7 Implementation of WPMI code assignments 2 Annex A Examples of WPMI code 3 Publications referred to Inside back coverii blankBSAU184:1982 BSI 02-2000 1 1 Scope This International Standard specifies the content and structure of an identifier in order to esta

11、blish, on a world-wide basis, the identification of the manufacturers of parts for road vehicles; this identifier may serve, at the manufacturers option, as a substitute or an addition for various national or international systems which already exist, such as name and address, trade mark, etc. The p

12、urpose of this International Standard is not to prescribe the existence of a marking but to unify its structure when, for whatever reason, it is present. Nor is the purpose to identify each part but merely the manufacturer who has taken the responsibility for it. 2 Field of application This Internat

13、ional Standard applies only to manufacturers of parts intended to be used on road vehicles as defined in ISO3833. 3 References ISO3780, Road vehicles World manufacturer identifier (WMI) code. ISO3833, Road vehicles Types Terms and definitions. ISO., Road vehicles Guide for the implementation of the

14、world manufacturer identifier (WMI) code assignments 1) . 4 Definitions For the purpose of this International Standard, the following definitions apply: 4.1 parts manufacturer the person, firm or corporation who takes the responsibility for the part or assembly that requires source identification 4.

15、2 world parts manufacturer identifier (WPMI) the code assigned to a parts manufacturer which permits his identification in a univocal manner around the world for a period of minimum30 years 5 General characteristics of the WPMI code 5.1 The WPMI code shall consists of four alphanumeric characters. O

16、nly the following arabic numerals and roman letters shall be used: (the letters I, O and Q shall not be used). 5.2 The assigned WPMI codes will be maintained and checked by the International Agency acting under authorization from ISO: SAE, Society of Automotive Engineers, Inc.;400 Commonwealth Drive

17、, Warrendale Pa.15096 USA. 5.3 One or more WPMI codes may be assigned to each parts manufacturer by the national organization of that country in which the manufacturer has its headquarters. 5.4 A WPMI code assigned to a parts manufacturer shall not be assigned to another manufacturer for at least30

18、years after the last year in which the code was used. 6 Specific characteristics required for the characters in the WPMI code NOTESee examples in the annex. 6.1 First and second characters This block of two characters designates a country. 6.1.1 If one or two blocks of two characters have been assig

19、ned to a country by the International Agency, according to ISO3780, those characters shall be used. 6.1.2 If no block of two characters has been assigned to it, the National Organization shall request it of the International Agency designated according to ISO3780. 6.2 Third and fourth characters 6.2

20、.1 Case where the parts manufacturer is also a road vehicle manufacturer and owns a WMI code of three characters as defined in6.4.1 of ISO3780. In this case, the WPMI code assigned to the parts manufacturer shall be constituted by the three characters of the WMI code and a fourth character which sha

21、ll be0. 6.2.2 Case where the parts manufacturer is also a road vehicle manufacturer and owns a WMI code as defined in6.4.2 of ISO3780 (manufacturer producing less than500 vehicles per year). 1) In preparation. 1 2 3 4 5 6 7 8 9 0 A B C D E F G H J K L M N P R S T U V W X Y ZBSAU184:1982 2 BSI 02-200

22、0 In this case, the parts manufacturer shall receive a WPMI code composed as follows: the first two characters shall be those of the WMI code; the3rd character shall be the numeral9; the4th character shall be fixed by the National Organization. 6.2.3 Case where the parts manufacturer is not a road v

23、ehicle manufacturer. In this case, the last two characters of the WPMI code shall be assigned by the National Organization, excluding the numeral9 for the3rd character and the numeral0 for the4th character. 7 Implementation of WPMI code assignments For implementation of WMI code assignments, an ISO

24、guide is under preparation.BSAU184:1982 BSI 02-2000 3 Annex A Examples of WPMI code * Alphanumeric character to be distributed by the National Organization.4 blankBSAU184:1982 BSI 02-2000 Publications referred to See national foreword.BS AU 184:1982 ISO4100:1980 BSI 389 Chiswick High Road London W4

25、4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Use

26、rs of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretar

27、y of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standa

28、rds Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStanda

29、rds, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on a

30、ll its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership

31、Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be re

32、produced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and siz

33、e, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.