ATIS 0300040-2008 Guideline for Data Elements included in the Management Information Base (MIB) (Issued with the resolution of Issue 21).pdf

《ATIS 0300040-2008 Guideline for Data Elements included in the Management Information Base (MIB) (Issued with the resolution of Issue 21).pdf》由会员分享，可在线阅读，更多相关《ATIS 0300040-2008 Guideline for Data Elements included in the Management Information Base (MIB) (Issued with the resolution of Issue 21).pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 ATIS-0300040 ATIS Standard on - GUIDELINE FOR DATA ELEMENTS INCLUDED IN THE MANAGEMENT INFORMATION BASE (MIB) As a leading technology and solutions development organization, ATIS brings together the top global ICT companies to advance the industrys most-pressing business priorities. Through ATIS co

2、mmittees and forums, nearly 200 companies address cloud services, device solutions, emergency services, M2M communications, cyber security, ehealth, network evolution, quality of service, billing support, operations, and more. These priorities follow a fast-track development lifecycle from design an

3、d innovation through solutions that include standards, specifications, requirements, business use cases, software toolkits, and interoperability testing. ATIS is accredited by the American National Standards Institute (ANSI). ATIS is the North American Organizational Partner for the 3rd Generation P

4、artnership Project (3GPP), a founding Partner of oneM2M, a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications sectors, and a member of the Inter-American Telecommunication Commission (CITEL). For more information, visit. Notice of Discla

5、imer Provide or reference equipment with specific equipment attributes, features and technical information. Note 2: The CLEI Code does qualify as an Equipment Identifier (EI) ATIS-0300040 2 EPROM Erasable Programmable Read Only Memory. A read only memory device which can be erased an reprogrammed. T

6、ypically, it can be programmed electronically, but it is erase electronically with ultraviolet light. EPROMS are typically returned to the vendor or factory for reprogramming. Flash Memory Nonvolatile storage - i.e. storage that can retain information without electricity - but which can be electrica

7、lly erased and reprogrammed. Flash memory occupies little space and does not need continuous power to retain its memory. Intelligent Plug-in Card a plug-in card smart enough to query the system in which it is installed to make sure it has the correct software version. ISO Organization for Internatio

8、nal Standards. Manufacturer Equipment Version proprietary information that is assigned to each plug-in card during assembly by the manufacturer. NOTE: It identifies reportable changes (eg. That could be applied during the assembly and testing of plug-in cards without significantly altering the elect

9、rical, optical, external connectivity or physical characteristics) of the manufacturers original plug-in card. Version is one of the three primary elements needed to develop an Equipment Identifier. For further information on reportable changes, Refer to GR-209-CORE Management Information Base (MIB)

10、 a database of configuration management information that is stored on a Network Agent for access by a Network Management Station or local user interface device. MIB consists of a repository of characteristics and parameters managed in a network device such as a NIC, hub, switch or router. Manufactur

11、er Name name of the business entity that is physically stamped on the plug-in card. NOTE: This name or logo is clearly displayed, etched, or marked on each plug-in card and is part of the equipment identifier regardless of the current status of the manufacturer (renamed, dissolved, acquired, etc.).

12、In some instances, due to acquisitions, the identical equipment part and version number may be produced under multiple manufacturer names. Manufacturer Name is one of the three primary elements needed to develop an Equipment Identifier. Manufacturer Part Number proprietary character string of inform

13、ation that is assigned to each plug-in card by its manufacturer. NOTE 1: part numbers can be further described as: coding of arbitrary length and format that uniquely identifies a specific plug-in card or equipment mounting; coding that may contain some basic information on the purpose or function o

14、f the plug-in card or mounting; This coding is stamped or etched on each plug-in card or mounting. Part numbers normally do not identify which version, issue, or release number was used to manufacture the plug-in card. NOTE 2: A part number is one of the three primary elements needed to develop an E

15、quipment Identifier. NOTE 3: A part number is not a GTIN (code used on the packaging for consumer packaged goods). NDIS A device driver specification co-developed by Microsoft and 3Com and used by LAN Manager and Vines and supported by many network card vendors. Network Agent a device, such as a wor

16、kstation, a router or a plug-in card, that is equipped to gather network performance information to send to the network management station. Network Management Station (NMS) is a dedicated workstation that gathers and stores network performance data, obtaining that data from network nodes running net

17、work agent software that enables them to collect the data. NIC Network Interface Card Public Network Operator (PNO) service provider; a term used outside of North America. Service Provider communications company, carrier, public network operator (PNO) ATIS-0300040 3 Smart Card a credit-card sized pl

18、astic card with an embedded computer chip. The chip can either be a microprocessor with internal memory or a memory chip with non-programmable logic. The chip connection is either via direct physical contact or remotely via a contact-less electromagnetic interface. 4 Required Data Elements This sect

19、ion defines the data elements that shall be included in the MIB. 4.1 Equipment Identifier At least one of the following equipment identifiers shall be included. However, if the product requires a CLEI Code, it shall be included. 4.1.1 CLEI Code The CLEI Code of the hardware per ATIS-0300213. This is

20、 the same CLEI Code that is included in the bar code or 2D symbol and in the human readable on the label placed on the plug-in card. 4.1.2 Other Equipment Identifier The combination of the three following components are used to provide a single identity for a plug-in card and are normally stamped on

21、 the product: Manufacturer Name Manufacturer Part Number Manufacturing Equipment Version 4.2 Unique Serial Identification (USI) The Unique Serial Identification of the hardware as defined in ATIS-0300091 and ATIS-0300078. 4.3 Software Version The manufacturer specified version of the software. The S

22、oftware Version defines a set of features or functions to a software product announced and available to the service provider. This Software Version should indicate the most detailed release level specified by the manufacturer (i.e., lowest “dot” release). 5 Optional Data Elements This section define

23、s the recommended data elements associated with the hardware that a manufacturer may include in the MIB. These data elements are recommended. There may be other data elements that the manufacturer may need to include or the customer may require. ATIS-0300040 4 5.1 Manufacture Date The date of manufa

24、cture of the product in format YYYYMMDD (as defined in ISO 8601 or ANS X12.3 Data Element Number 374). 5.2 Manufacturer Product Name Unit acronym assigned by the equipment manufacturer that is normally stamped on the unit faceplate (e.g., LIU, CPU, MEM, PWR, etc.). Refer to ”Product Name” as defined

25、 in ETSI TS 102 209, clause 7.2. 6 References The following standards contain provisions which, through reference in this text, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements base

26、d on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ATIS-0300213.2006, Coded Identification of Equipment Entities of the North American Telecommunications System for Information Exchange1ATIS-0300091.2012, Serializat

27、ion Standard for Telecommunication Network Infrastructure Equipment2ATIS-0300078, Product Serialization Guideline3ETSI TS 102 209, Telecommunication Equipment Identification; TISPAN4ETSI TS 102 359, Information in the equipment Management Information Base (MIB); TISPAN4GR-209-CORE, Generic Requireme

28、nts for Product Change Notices (PCNs)5_ 1This document is available from the Alliance for Telecommunications Industry Solutions (ATIS), 1200 G Street NW, Suite 500, Washington, DC 20005, Telephone: (202) 434-8844, Fax: (202) 393-5453, https:/www.atis.org/docstore/product.aspx?id=22608 2This document

29、 is available from the Alliance for Telecommunications Industry Solutions (ATIS), 1200 G Street NW, Suite 500, Washington, DC 20005, Telephone: (202) 434-8844, Fax: (202) 393-5453, https:/www.atis.org/docstore/product.aspx?id=26784 3This document is available from the Alliance for Telecommunications

30、 Industry Solutions (ATIS), 1200 G Street NW, Suite 500, Washington, DC 20005, Telephone: (202) 434-8844, Fax: (202) 393-5453, https:/www.atis.org/docstore/product.aspx?id=22958 4This document is available from the European Telecommunications Standards Institute (ETSI). 5Telcordia documents are available from Telcordia, 1 Ericsson Drive, RRC 1B-180, Piscataway, NJ 08854-4157 or .