ASTM D4286-2008(2015) Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities《鉴定核动力发电机装置的涂覆承包人资格的标准实施规程》.pdf
《ASTM D4286-2008(2015) Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities《鉴定核动力发电机装置的涂覆承包人资格的标准实施规程》.pdf》由会员分享,可在线阅读,更多相关《ASTM D4286-2008(2015) Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities《鉴定核动力发电机装置的涂覆承包人资格的标准实施规程》.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: D4286 08 (Reapproved 2015)Standard Practice forDetermining Coating Contractor Qualifications for NuclearPowered Electric Generation Facilities1This standard is issued under the fixed designation D4286; the number immediately following the designation indicates the year oforiginal adopti
2、on or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This practice provides a criteria guide and proceduralmethod to assist uti
3、lity owners, architects, engineers,constructors, and other selection agencies in determining theoverall qualifications of a coating contractor to execute coatingwork for the primary containment and other safety-relatedfacilities of light-water nuclear power plants.1.2 The qualification criteria and
4、requirements address theessential basic capability of a contractor to execute nuclearcoating work. Obviously, the specific capability to executethose requirements unique to a given project must also becarefully considered. The evaluation procedure contained inthis practice is designed to be adaptive
5、 to this detailed finalqualification process. Variation or simplification of the practiceis appropriate for non safety-related areas of nuclear powerplants, fossil fueled facilities, and other industrial projects.1.3 The overall capability of a contractor to successfullyexecute the varied and comple
6、x requirements of nuclearcoating work is dependent upon competency in a variety ofessential categories.1.4 The nine evaluation categories described in Sections 312 detail the specific data to be provided by the contractor asessential to determining qualification status. In addition, a tenthuntitled
7、category has been provided on the evaluation workdescribed in Section 12 for inclusion of other informationpertinent to a specific project.1.5 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to
8、 establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2D3843 Practice for Quality Assurance for Protective Coat-ings Applied to Nuclear FacilitiesD4537 Guide for Establishing Procedures to
9、 Qualify andCertify Personnel Performing Coating and Lining WorkInspection in Nuclear Facilities2.2 American National Standards:3N 45.2.6 Qualifications of Inspection, Examination, andTesting Personnel for Nuclear Power PlantsNQA-1 Quality Assurance Requirements for Nuclear Facil-ity Applications2.3
10、 Other Standard:10 CFR 50 Appendix B Nuclear Regulatory Agency, QualityAssurance Criteria for Nuclear Power Plants43. Personnel3.1 Home Offce Management and StaffResumes of thefollowing types of personnel including educationalbackground, duration and degree of involvement in industrialcoating operat
11、ions, qualifications, registrations, certifications,and specific experience in nuclear coating work.3.1.1 Principals and General Management.3.1.2 Engineering Manager.3.1.3 Project EngineersList specific nuclear coating workproject involvement.3.1.4 QA/QC ManagerList specific qualification/certificat
12、ion credentials perANSI N 45.2.6, or Guide D4537,orNQA-1.3.2 General Field or Shop SupervisionResumes to in-clude specific nuclear coatings work experience.1This practice is under the jurisdiction of ASTM Committee D33 on ProtectiveCoating and Lining Work for Power Generation Facilities and is the d
13、irectresponsibility of Subcommittee D33.05 on Application and Surface Preparation.Current edition approved Dec. 1, 2015. Published January 2016. Originallyapproved in 1984. Last previous edition approved in 2008 as D4286 08. DOI:10.1520/D4286-08R15.2For referenced ASTM standards, visit the ASTM webs
14、ite, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Available from American National Standards Institute (ANSI), 25 W. 43rd St.,4th Floor, New York, NY 10036, http
15、:/www.ansi.org.4Available from U.S. Government Printing Office Superintendent of Documents,732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401, http:/www.access.gpo.gov.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States13.3 On-S
16、ite or In-Shop Project Supervision:3.3.1 Total number of personnel qualified for nuclear coat-ings work, including specific work history.3.3.2 Total number available in a specific time frame, ifappropriate.4. Contractor Work Experience4.1 General ExperienceList of comparable industrialprojects, incl
17、uding type (construction or maintenance), form ofcontract, dollar volume, scope, and duration (start and comple-tion dates) executed during the past five years. Accompanyingthis listing provide personnel references to include names,titles, locations, and telephone numbers.4.2 Nuclear Coating Work Ex
18、perience:4.2.1 List of nuclear projects including type (construction ormaintenance), form of contract, dollar volume, scope, andduration, materials, and equipment involved. Accompanyingthis listing provide personnel references to include names,titles, locations, and telephone numbers.4.2.2 If the co
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMD428620082015STANDARDPRACTICEFORDETERMININGCOATINGCONTRACTORQUALIFICATIONSFORNUCLEARPOWEREDELECTRICGENERATIONFACILITIES
链接地址:http://www.mydoc123.com/p-516712.html