ASTM D123-2017e1 Standard Terminology Relating to Textiles.pdf
《ASTM D123-2017e1 Standard Terminology Relating to Textiles.pdf》由会员分享,可在线阅读,更多相关《ASTM D123-2017e1 Standard Terminology Relating to Textiles.pdf(70页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: D123 171Standard Terminology Relating toTextiles1This standard is issued under the fixed designation D123; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates th
2、e year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S. Department of Defense.1NOTEThis terminology was updated editorially in August 2018.1. Scope1.1 This standard is the c
3、ompilation of all terminologydeveloped by Committee D13 on Textiles.1.1.1 This terminology, consists mostly of definitions,which are specific to the textile industry. Meanings of the sameterms used outside the textile industry can be found in othercompilations or in dictionaries of general usage.1.1
4、.2 The specific D13 subcommittee (SC) which has juris-dictional responsibility for every item is the first attributionnoted after the definition. The SC terminology standard inwhich all the terms and definitions appear is listed by numberafter the jurisdiction for the term. The wording of an entryca
5、nnot be changed without the approval of the subcommitteewhich has jurisdiction. Users of this compilation should alsoreview the SC terminology standard listed for more details orinterpretations of these terms and their use by the SC havingjurisdiction.1.2 In addition to being a specialized dictionar
6、y, Terminol-ogy D123 is also a tool for managing the committeesterminology. This includes finding, eliminating, and preventingredundancies, that is, where two or more terms relating thesame concept are defined in different words. Redundancies canalso occur when one definition is used for two or more
7、 terms.1.3 While the review for clarity and form are the responsi-bility of the terminology subcommittee, the concept of man-aging terminology is the broad responsibility of every writer ofstandards, specifically the task group leader and subcommitteechairman.1.4 Subsequent to a listing of specific
8、subcommitteecompilations, this standard is comprised of the followingsections that are listed in the order in which they appear.1.4.1 Alphabetical listing of terms with definitions followedby SC attribution in brackets and SC terminology standard.1.4.2 Annex A1 Terms Relating to the Hand of Fabrics.
9、1.4.3 Annex A2 Industry Accepted Synonyms.1.4.4 Annex A3 Terminology Taken From D13 StandardsThat Have Been Withdrawn.1.4.5 Annex A4 Terminology Relating to Leather.1.4.6 Annex A5 Terminology Revision Procedures.1.4.7 Appendix X1 Other Sources of Textile Terminology.1.5 This international standard w
10、as developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade (TBT) Committee.2. Referen
11、ced Documents2.1 ASTM Standards:2D2050 Terminology Relating to Fasteners and ClosuresUsed with TextilesD3136 Terminology Relating to Care Labeling for Apparel,Textile, Home Furnishing, and Leather ProductsD3888 Terminology for Yarn Spinning SystemsD3990 Terminology Relating to Fabric DefectsD4391 Te
12、rminology Relating to The Burning Behavior ofTextilesD4845 Terminology Relating to WoolD4848 Terminology Related to Force, Deformation andRelated Properties of TextilesD4849 Terminology Related to Yarns and FibersD4850 Terminology Relating to Fabrics and Fabric TestMethodsD4920 Terminology Relating
13、to Conditioning, Chemical,and Thermal PropertiesD5219 Terminology Relating to Body Dimensions for Ap-parel SizingD5253 Terminology Relating to Floor Coverings and TextileUpholstered Furniture1This terminology is under the jurisdiction ofASTM Committee D13 on Textilesand is the direct responsibility
14、of Subcommittee D13.92 on Terminology.Current edition approved March 1, 2017. Published April 2017. Originallyapproved in 1921. Last previous edition approved in 2015 as D123 15b1. DOI:10.1520/D0123-17E01.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer S
15、ervice at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United StatesThis international standard was developed i
16、n accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.1D5646 Terminology Relatin
17、g to Seams and Stitches Used inHome SewingD5684 Terminology Relating to Pile Floor CoveringsD6477 Terminology Relating to Tire Cord, Bead Wire, HoseReinforcing Wire, and FabricsD6798 Terminology Relating to Flax and LinenD6799 Terminology Relating to Inflatable RestraintsD6963 Terminology Relating t
18、o Sewn Products AutomationD7018 Terminology Relating to Glass Fiber and Its ProductsD7022 Terminology Relating to ApparelD7023 Terminology Relating to Home FurnishingsD7139 Terminology for Cotton FibersD7722 Terminology Relating to Industrial Textile Stitchesand Seams3. Terminology3.1 Alphabetical l
19、isting of terms with subcommittee juris-diction and attribution for each term.A-tuft, na single-pass process for aligning hook free fiberson the Fibroliner FL-101. D 13.11 D7139abrasion, nthe wearing away of any part of a material byrubbing against another surface. D13.59 D4850abrasion, nfor inflata
20、ble restraint fabrics, a fuzzy cluster ofbroken filaments damaged by scraping. D13.20 D6799abrasion cycle, none complete movement across the surfaceof a material. D13.59 D4850abrasion cycle, nfor the Martindale Abrasion Tester, 16 rubsrequired to complete a geometric shape, known as aLissajous. D13.
21、59 D4850abrasion cycle, nin abrasion testing, one or more move-ments of the abradant across a material surface, or thematerial surface across the abradant, that permits a return toits starting position. D13.59 D4850abrasion mark, nan area damaged by friction.D13.59 D3990absolute humidity, nthe mass
22、of water vapor present in aunit volume of air. (See humidity and relative humidity)D13.51 D4920absorbent compound, nin textile cleaning, sponge-likeparticles which, when saturated with water or dry solventand detergent and brushed into the textile, remove soil fromthe textile. See powder cleaner. D1
23、3.62 D5253absorbent pad, nfor cleaning textile floor coverings, a damptextile material (fabric, felt, sponge, or mop) used to agitateand wipe the pile and, in the process, absorb soil.D13.62 D5253absorption, na process in which one material (the absorbent)takes in or absorbs another (the absorbate);
24、 as the absorptionof moisture by fibers. (See also adsorption, and moistureequilibrium for testing. Compare desorption andresorption.) D13.51 D4920accelerated aging, nin textile processing and testing, the useof controlled environmental conditions to promote rapidphysical or chemical change in a tex
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMD1232017E1STANDARDTERMINOLOGYRELATINGTOTEXTILESPDF
链接地址:http://www.mydoc123.com/p-509490.html