[计算机类试卷]微软认证70-210模拟试卷8及答案与解析.doc

《[计算机类试卷]微软认证70-210模拟试卷8及答案与解析.doc》由会员分享，可在线阅读，更多相关《[计算机类试卷]微软认证70-210模拟试卷8及答案与解析.doc（12页珍藏版）》请在麦多课文档分享上搜索。

1、微软认证 70-210模拟试卷 8及答案与解析 1 You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional. What should you do? （ A） When installing Windows 2000 Professional run chkdisk in Windows NT Workstation. （ B） Disable the disk compression in Windows NT Workstation. （ C） In

2、stall service pack four or later in Windows NT Workstation. （ D） Install the distributed file system client on the Windows NT Workstation. 2 You need to install Windows 2000 Professional on a new computer in your network. You use the setup manager wizard to configure a fully automated installation s

3、cript file. You begin an unattended installation and leave the office. When you return, the installation has reached the GUI-mode setup and you see the following error message “Unattended setup is unable to continue because a setup parameter specified by your system administrator or computer manufac

4、turer is missing or invalid.“ You need to complete the installation. What must you do? （ A） In the unattended section of the answer file, set theOemPreinstallproperty to Yes. （ B） In the NetBinding section of the answer file, specify theEnablevariable. （ C） In the UserData section of the answer file

5、, specify theProductIDvariable （ D） In the GUIUnattended section of the answer file set theOemSkipWelcomeproperty to 1. 3 You want to upgrade 400 computers from Windows 95 to Windows 2000 Professional. Most of the computers in your company use the same hardware. However, several different peripheral

6、 devices are used throughout the company. You want to verify that the hardware in use is compatible with Windows 2000 Professional. You want to accomplish this with least amount of administrative effort. What should you do? （ A） Create several different computer configurations. Install Windows 2000

7、Professional and enable driver signing. （ B） Create a bootable floppy disk that contains and automatically runsWinNT32.exe/CheckUpgradeOnlyQ. Send the floppy disk to each user on the network. （ C） Copy the contents of Windows 2000 Professional CD-ROM to a network share. From the network, modify your

8、 network logon scripts to runWinNT32.exe/Unattended:ReportOnly. （ D） Use Setup Manager to create a Setup.inf file. Add the entryReportOnly=Yes to the Win9xUpg section of the answer file. RunWinnt32.exe /Unattended:Setup.infon all of the different computer configurations. 4 You are the administrator

9、of a Windows 2000 Professional computer that has a shared printer. Several departments in your company use the shared printer. The Sales department frequently prints multiple-page presentation graphics, which take a long time to print. Users in other departments who have short messages to print must

10、 wait an unnecessarily long time for their jobs to print. You want to improve the efficiency of printing for all users who use the shared printer. You want to accomplish this with the least amount of administrative effort. What should you do? （ A） Configure the priority of the printer to 50. Add a n

11、ew printer, and set the priority to 1. For the new printer, deny print permission for users in the Sales department. （ B） Configure the priority of the printer to 50. Add a new printer, and set the priority to 99. For the new printer, deny print permissions for users in the Sales department. （ C） Mo

12、nitor the print queue and raise the priority of all print jobs that are sent by users who are not members of the Sales department. （ D） Delete the old printer. Add a new printer, and set the priority to a higher value. Pause the print queue only when graphic intensive print jobs are printing. 5 You

13、want to connect your Windows 2000 Professional computer to a new color laser printer. The printer is Plug and Play compliant. The printer is included on the current Hardware Compatibility List (HCL).You are a member of the Sales organizational unit (OU). You want to share the printer with other user

14、s in the Sales Organizational Unit.You plug the printer into the LPT port on the back of the computer. You then attempt to install the 32-bit application printer software that came with the printer. During the installation you receive an error message as shown in the exhibit. What should you do befo

15、re you share the printer to other users in the Sales OU? （ A） Change the LPT port settings to enable legacy Plug and Play detection on your computer. （ B） Change the LPT port setting to bidirectional in the BIOS on your computer. Then reinstall the printer software. （ C） Connect the printer to anoth

16、er computer in the Sales Organizational Unit. Then install the device drivers for the printer. （ D） Obtain and install WDM-compliant device drivers and printing software for the printer. 6 You are the workstation administrator at Ezonexam. You administer a Windows 2000 Professional computer named VE

17、1. VE1 has a shared color laser printer named Printer1. You need to print a document immediately. The print queue for Printer1 has ten jobs ahead of yours in the queue. You want to print your document without waiting for the other ten jobs to print. You want to do this with the least amount of admin

18、istrative effort. What should you do? （ A） Change the priority of all other print jobs to99. （ B） Change the priority of your print job to99. （ C） Change the configuration of Printer1 to Not Shared. （ D） Create a new port on Printer1 that connects to a different print device. Configure Printer1 to u

19、se the new port. 7 You are the desktop administrator for Es sales department. Tess King is a user in the sales department. Tess Kings Windows XP Professional computer has a single hard disk, which if formatted as NTFS. Tess stores her data in a folder named C:EzonexamFiles1, which is shared as Ezone

20、xamFiles1. Ezonexam policy allows members of the Sales group and the Marketing group to add files to the EzonexamFiles1 shared folder. A user named Philippe is a member of the Sales group and Marketing group. Tess King reports that Philippe is not able to add files to the EzonexamFiles1 shared folde

21、r. While troubleshooting the problem, you discover that the Sales global group has Allow - Read permission for the EzonexamFiles1 shared folder, and that the Marketing global group has Allow - Modify permission for the C:EzonexamFiles1 folder. You need to ensure that users in the Sales group and the

22、 Marketing group can add files to the EzonexamFiles1 shared folder. Which two actions should you take? (Each correct answer presents part of the solution. Choose two) A.For the EzonexamFiles1 shared folder, grant the Everyone group Allow - Full Control permission. B.For the EzonexamFiles1 shared fol

23、der, grant the Marketing global group Allow Read permission. C.For the TeskKingFiles1 shared folder, grant the Sales global group Allow Change permission. D.For the C:EzonexamFiles1 folder, grant the Marketing global group Allow Read permission. E.For the C:EzonexamFiles1 folder, grant the Sales glo

24、bal group Allow Modify permission. F.For the C:EzonexamFiles1 folder, grant the Marketing global group Allow Write permission. 8 You are the administrator of your companys network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Profes

25、sional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations. You want to accomplish the following goals:

26、 1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers. 2. Existing user environments will be maintained on the Windows 2000 Professional computers. 3. The network name of each Windows 2000 Professional computer will be changed to mat

27、ch its asset tag. 4. The RIS image and the upgraded applications will be enabled as they are added to the network. You take the following actions: 1. Install the RIS image on a Windows 2000 Professional computer named Computer1. 2. Install the upgraded applications on Computers1. 3. Change the netwo

28、rk name of Computer1 to %DMI-SERIAL_NUM%. 4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server. 5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server. Which result or results do these actions produce? (Choose all that apply.) （

29、A） An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers. （ B） Existing user environments will be maintained on the Windows 2000 Professional computers. （ C） The network name of each Windows 2000 Professional computer will be changed to

30、match its asset tag. （ D） The RIS image and the upgraded applications will be enabled as they are added to the network. 微软认证 70-210模拟试卷 8答案与解析 1 【正确答案】 C 【试题解析】 Explanation: In this scenario a computer should be configured for a dual boot between Windows NT Workstation and Windows 2000 Professional.

31、 Windows 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system. Incorrect answers: A: Windows 2000 Professional uses the NTFS 5.0 file system w

32、hile Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system. B: Disabling the disk compression in Windows NT Workstation will not enable Windows NT Workstation to use the NTFS 5.0 file system. Windo

33、ws 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system. D: Neither Windows 2000 Professional nor Windows NT Workstation 4.0 support a distrib

34、uted file system client. Therefore this solution is not appropriate for this scenario. 2 【正确答案】 C 【试题解析】 Explanation: For a fully unattended installation to complete, the ProductID or product registration key, must be specified in the UserData section of the answer file. The syntax of this key is Pr

35、oductId = “XXXXX-XXXXX-XXXXX-XXXXX-XXXXX“. If this key is missing the error message is returned. Incorrect Answers: A: The OemPreinstall property is used to determine whether a special subdirectory, $OEM$, should be copied to the hard drive and certain sections used during setup. This is an optional

36、 property and does not affect the success of an unattended installation. B: The Netbindings section of the answer file refers to communication channels between various network components. This section would not generate the error message as the Netbindings section can be used to specify communicatio

37、n between network components on the target computer after Windows 2000 Professional has been installed on the computer. D: The OemSkipWelcome property is used to specify whether the Windows Welcome Screen should be displayed when the system boots during the installation process. This is an optional

38、setting that does not require user interaction during the installation process and has no effect on the success of an unattended installation of Windows 2000 Professional. 3 【正确答案】 D 【试题解析】 Explanation: Winnt32.exe /unattended:setup.inf will start an unattended installation using the answer file set

39、up.inf. When ReportOnly=Yes is added in the Win9xUpg section of the answer file, the installation only generates an upgrade report and then exits without making any changes to the current Windows 95 or Windows 98 installation. The upgrade report contains a list of hardware and software incompatibili

40、ties and is saved to the root of the system drive if the SaveReportTo key is not specified. Incorrect Answers: A: Creating several different computer configurations and installing Windows 2000 Professional with the driver signing enabled would require a great deal of administrative effort, administr

41、ative effort that is not required as the process can be automated by running the Winnt32.exe /unattended:setup.inf with the ReportOnly option set to Yes. B: You cannot run winnt32 from a bootable diskette, as the boot floppy operates in DOS mode. You therefore cannot use 32-bit applications such as

42、Winnt32 when booting form a floppy disk. Winnt32 can only be run from a Windows environment. The boot disk can start winnt. Furthermore, the switch /checkupgradeOnlyQ is not correct. The switch should be /checkupgradeOnly without any Q. C: The command winnt32.exe /unattended:ReportOnly will not work

43、. It will try to start an unattended installation with an answer file named ReportOnly. Furthermore, the ReportOnly=Yes statement must be added in the Win9xUpg section of the answer file, not by putting ReportOnly in the winnt32 command line. 4 【正确答案】 B 【试题解析】 Explanation: The Sales department has l

44、ong-running printing jobs that are blocking the print device for long periods of time. In order to give the other departments print jobs higher priority than the Sales departments print jobs, we create a new printer with higher priority. We deny print permission for the Sales department on the new p

45、rinter. Note: The highest printer priority is 99 and the lowest is 1. We should also set the new printer as the default printer for all users except for users belonging to the Sales department. Incorrect Answers: A: Specifying a priority of 1 for the new printer will give the new printer a lower pri

46、ority than the existing printer will. The long-running print jobs from the Sales department would have higher priority than the other departments. C: Monitoring the print queue and raising the priority of all print jobs that are sent by users who are not members of the Sales department would require

47、 a lot of administrative effort. D: This proposed solution only uses one printer and requires the administrator to manually pause print jobs to give certain print jobs higher priority. This would require an enormous amount of administrative effort and is therefore not the best solution. 5 【正确答案】 D 【

48、试题解析】 Explanation: An error message with a reference to the print.dll file indicates a problem with the printer driver. The current print driver should be replaced with a WDM-compliant driver. WDM-compliant drivers and WDM-compliant printing software should be used to assure that the printers and th

49、e print devices work well in Windows 2000. The Windows Driver Model (WDM) provides a common model for device drivers across Windows 98 and Windows 2000 and would thus work in both Windows 98 and Windows 2000. Incorrect answers: A: The computer is a modern color laser printer, which is included in the Hardware Compatibility List (HCL). It is therefore not a legacy device. Therefore enabling legacy plug and play detection of the print port will not solve the problem in this scenario. B: Bidirectional support enables communication between the physical print d