ASTM B549-2013 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors《天花板电导线用包铝钢芯加强的同心绞捻铝导线.pdf

《ASTM B549-2013 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors《天花板电导线用包铝钢芯加强的同心绞捻铝导线.pdf》由会员分享，可在线阅读，更多相关《ASTM B549-2013 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors《天花板电导线用包铝钢芯加强的同心绞捻铝导线.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: B549 10B549 13Standard Specification forConcentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead ElectricalConductors1This standard is issued under the fixed designation B549; the number immediately following the designation indicates the year ofor

2、iginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers concentric-lay-stranded conductors

3、made from round aluminum 1350-H19 (extra hard) aluminumwires and round aluminum-clad steel core wires for use as overhead electrical conductors (Explanatory Note 1 and Note 2).1.2 The SI values of density and resistivity are to be regarded as standard. For all other properties the inch-pound units a

4、reregarded as standard and the SI units may be approximate.2. Referenced Documents2.1 The following documents of the issue in effect on date of material purchase form a part of this specification to the extentreferenced herein.2.2 ASTM Standards:2B230/B230M Specification for Aluminum 1350H19 Wire fo

5、r Electrical PurposesB263 Test Method for Determination of Cross-Sectional Area of Stranded ConductorsB354 Terminology Relating to Uninsulated Metallic Electrical ConductorsB500/B500M Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead ElectricalConductorsB502

6、Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum ConductorsE29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications2.3 ANSI Standards:3ANSI C 42.100 Dictionary of Electrical and Electronics TermsANSI H 35.1 American Na

7、tional Standard Alloy and Temper Designation Systems for Aluminum2.4 Other Standard:NBS Handbook 100Copper Wire Tables of the National Bureau of Standards43. Terminology3.1 Description of Terms Specific to This Standard3.1.1 ACSR covered by this specification has one type of steel core wire which is

8、 designated by the following abbreviation(Explanatory Note 2):3.1.1.1 ACSR/AWACSR using aluminum-clad steel wire (Explanatory Note 2).4. Classification4.1 For the purpose of this specification, conductors are classified as follows (Explanatory Note 1 and Note 2):4.1.1 Class AAFor bare conductors usu

9、ally used in overhead lines. These conductors are used as follows:1 This specification is under the jurisdiction of ASTM Committee B01 on Electrical Conductors and is the direct responsibility of Subcommittee B01.07 on Conductorsof Light Metals.Current edition approved April 1, 2010April 1, 2013. Pu

10、blished May 2010May 2013. Originally approved in 1971. Last previous edition approved in 20042010 asB549 04.B549 10. DOI: 10.1520/B0549-10.10.1520/B0549-13.2 For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at serviceastm.org. For Annual Book of ASTM

11、 Standardsvolume information, refer to the standards Document Summary page on the ASTM website.3 Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http:/www.ansi.org.4 Available from National Technical Information Service (NTIS), U.S. Departm

12、ent of Commerce, Alexandria, Virginia5301 Shawnee Rd., Alexandria, VA 22312,http:/www.ntis.gov.This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Becauseit may not be technically pos

13、sible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current versionof the standard as published by ASTM is to be considered the official document.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, W

14、est Conshohocken, PA 19428-2959. United States14.1.1.1 Conductors used for regular overhead line construction and4.1.1.2 Conductors having a high ratio of mechanical strength to current-carrying capacity used for overhead ground wires andfor extra-long span construction.4.1.2 Class AFor conductors t

15、o be covered with weather-resistant (weatherproof) materials.5. Ordering Information5.1 Orders for material under this specification shall include the following information:5.1.1 Quantity of each size, stranding, and class,5.1.2 Conductor size: circular mil area or AWG of aluminum wires (Section 9 a

16、nd Table 1),5.1.3 Number of wires, aluminum, and aluminum-clad steel (Table 1),5.1.4 Direction of lay of outer layer of aluminum wires if other than right-hand (see 8.2),5.1.5 Special tests, if required (see 15.3 and 15.5),5.1.6 Package size (see 17.1 and Explanatory Note 5),5.1.7 Special package ma

17、rking, if required (Section 17),5.1.8 Lagging, if required (see 17.3), and5.1.9 Place of inspection (Section 16).6. Requirement for Wires6.1 Before stranding, the aluminum wires used shall meet all the requirements of Specification B230/B230M.6.2 Before stranding, the aluminum-clad steel core wires

18、used shall meet all the requirements of Specification B502.7. Joints7.1 Electric-butt welds, cold-pressure welds, or electric-butt, cold-upset welds in the finished individual aluminum wirescomposing the conductor may be made during the stranding process. No weld shall occur within 50 ft (15 m) of a

19、 weld in the samewire or in any other wire of the completed conductor (Explanatory Note 1).7.2 There shall be no joints of any kind made in the finished aluminum-clad steel wires.8. Lay8.1 The length of lay of the various layers of aluminum wires in a conductor shall conform to Table 2 (Explanatory

20、Note 5).The length of lay of the various layers of aluminum-clad steel wires shall conform to Specification B500/B500M. The length oflay of the varous layers of mixed aluminum and aluminum-clad steel wires (AWAC) shall conform to Table 2.8.2 The direction of lay of the outside layer of wires shall b

21、e right hand unless otherwise specified in the purchase order. Thedirection of lay of the aluminum and aluminum-clad steel wires shall be reversed in successive layers.9. Construction9.1 The number and diameter of aluminum and steel wires and the areas of cross section of aluminum wires shall confor

22、m tothe requirements prescribed in Table 1 and Fig. 1.9.2 Where compressed stranding is required in order to insulate the conductor properly, one or more aluminum layers of anystranded conductor consisting of 7 wires or more may be slightly compressed, thereby reducing the outside diameter of thecon

23、ductor by not more than 3 %, provided that the area of cross section after compressing is in accordance with Section 13.10. Rated Strength of Conductor10.1 The rated strength of a completed conductor shall be taken as the aggregate strength of the aluminum and aluminum-cladsteel components, calculat

24、ed as follows. The strength contribution of the aluminum wires shall be taken as the percentage,according to the number of layers of aluminum wires, indicated in Table 3, of the sum of the strengths of the 1350-H19 wires,calculated from their specified nominal wire diameter and the appropriate speci

25、fied minimum average tensile strength given inSpecification B230/B230M. The strength contribution of the aluminum-clad steel core wires shall be taken as the percentageaccording to the number of layers of aluminum-clad steel wires, indicated in Table 3, of the sum of the strengths of thealuminum-cla

26、d steel wires, calculated from their specified nominal wire diameter and the appropriate specified minimum stress at1 % extension given in Specification B502.10.2 Rated strength and breaking strength values shall be rounded to three significant figures, in the final value only, inaccordance with the

27、 rounding method of Practice E29.11. Density11.1 For the purpose of calculating mass, cross sections, etc., the density of aluminum 1350 shall be taken as 2705kg/m3 (0.0975 lb/in.3) at 20C (68F) (Explanatory Note 6).B549 132TABLE 1 Construction Requirements of Concentric-Lay-Stranded Aluminum Conduc

28、tors, Aluminum-Clad Steel ReinforcedACode NameBConductor SizeClassCStranding ConductorRatedStrengthConductorMass perUnit LengthCross-sectionalArea UsingOnlyAluminumStrand WiresApproximateCross-sectionalArea IncludingNominalAluminumArea in AWStrand WiresDAluminum Aluminum-Clad SteelNum-berofWiresNomi

29、nalDiameterNum-berofWiresNominalDiameter(1000lbf) kNlb/1000ft kg/kmcmil mm2 cmil mm2 in. mm in. mmThrasher/AW 2312000 1171 2324300 1178 AA 76 0.1744 4.43 19 0.0814 2.07 55.3 246 2472 3679Kiwi/AW 2167000 1098 2176100 1103 AA 72 0.1735 4.41 7 0.1157 2.94 49.1 218 2262 3366Bluebird/AW 2156000 1092 2173

30、100 1101 AA 84 0.1602 4.07 19 0.0961 2.44 59.0 262 2437 3627Chukar/AW 1780000 902 1795200 910 AA 84 0.1456 3.70 19 0.0874 2.22 49.4 220 2013 2996Falcon/AW 1590000 806 1609800 816 AA 54 0.1716 4.36 19 0.1030 2.62 53.0 236 1960 2917Lapwing/AW 1590000 806 1601200 811 AA 45 0.1880 4.78 7 0.1253 3.18 41.

31、8 186 1746 2598Parrot/AW 1510500 765 1528200 774 AA 54 0.1672 4.25 19 0.1003 2.55 50.3 224 1860 2768Nuthatch/AW 1510500 765 1520500 770 AA 45 0.1832 4.65 7 0.1221 3.10 39.7 177 1658 2467Plover/AW 1431000 725 1448900 734 AA 54 0.1628 4.14 19 0.0977 2.48 47.7 212 1764 2625Bobolink/AW 1431000 725 14402

32、00 730 AA 45 0.1783 4.53 7 0.1189 3.02 37.6 167 1570 2336Martin/AW 1351500 685 1367700 693 AA 54 0.1582 4.02 19 0.0949 2.41 45.1 201 1665 2478Dipper/AW 1351500 685 1360100 689 AA 45 0.1733 4.40 7 0.1155 2.93 35.5 158 1483 2207Pheasant/AW 1272000 645 1287700 652 AA 54 0.1535 3.90 19 0.0921 2.34 42.4

33、189 1568 2333Bittern/AW 1272000 645 1280600 649 AA 45 0.1681 4.27 7 0.1121 2.85 33.4 149 1396 2078Skylark/AW 1272000 645 1275400 646 AA 36 0.1880 4.78 1 0.1880 4.78 25.7 114 1272 1893Grackle/AW 1192500 604 1206700 611 AA 54 0.1486 3.77 19 0.0892 2.27 40.2 179 1470 2188Bunting/AW 1192500 604 1201000

34、609 AA 45 0.1628 4.14 7 0.1085 2.76 31.3 139 1309 1948Finch/AW 1113000 564 1127800 571 AA 54 0.1436 3.65 19 0.0862 2.19 37.5 167 1373 2043Bluejay/AW 1113000 564 1120500 568 AA 45 0.1573 4.00 7 0.1049 2.66 29.3 130 1222 1819Curlew/AW 1033500 524 1046100 530 AA 54 0.1383 3.51 7 0.1383 3.51 35.6 158 12

35、74 1896Ortolan/AW 1033500 524 1040000 527 AA 45 0.1515 3.85 7 0.1010 2.57 27.1 121 1134 1688Tanager/AW 1033500 524 1035800 525 AA 36 0.1694 4.30 1 0.1694 4.30 21.1 94 1033 1537Cardinal/AW 954000 483 966100 490 AA 54 0.1329 3.38 7 0.1329 3.38 32.9 146 1177 1752Rail/AW 954000 483 960400 487 AA 45 0.14

36、56 3.70 7 0.0971 2.47 25.4 113 1047 1558Catbrid/AW 954000 483 956600 485 AA 36 0.1628 4.14 1 0.1628 4.14 19.5 87 954 1420Canary/AW 900000 456 911400 462 AA 54 0.1291 3.28 7 0.1291 3.28 31.0 138 1111 1653Ruddy/AW 900000 456 906100 459 AA 45 0.1414 3.59 7 0.0943 2.40 24.0 107 988 1470Mallary/AW 795000

37、 403 812700 412 AA 30 0.1628 4.14 19 0.0977 2.48 37.1 165 1160 1726Condor/AW 795000 403 805000 408 AA 54 0.1213 3.08 7 0.1213 3.08 27.8 124 980 1458Tern/AW 795000 403 800400 406 AA 45 0.1329 3.38 7 0.0886 2.25 21.5 96 872 1298Drake/AW 795000 403 807600 409 AA 26 0.1749 4.44 7 0.1360 3.45 30.5 136 10

38、41 1549Cuckoo/AW 795000 403 805000 408 AA 24 0.1820 4.62 7 0.1213 3.08 27.5 122 981 1460Coot/AW 795000 403 797200 404 AA 36 0.1486 3.77 1 0.1486 3.77 16.6 74 795 1183Redwing/AW 715500 363 730900 370 AA 30 0.1544 3.92 19 0.0926 2.35 33.4 149 1043 1552Starling/AW 715500 363 727400 369 AA 26 0.1659 4.2

39、1 7 0.1290 3.28 27.5 122 936 1393Stilt/AW 715500 363 725000 367 AA 24 0.1727 4.39 7 0.1151 2.92 24.8 110 883 1314Gannet/AW 666600 338 676600 343 AA 26 0.1601 4.07 7 0.1245 3.16 26.0 116 872 1298Flamingo/AW 666600 338 675400 342 AA 24 0.1667 4.23 7 0.1111 2.82 23.1 103 823 1225Egret/AW 636000 322 650

40、200 329 AA 30 0.1456 3.70 19 0.0874 2.22 29.9 133 928 1381Sooter/AW 636000 322 650500 330 AA 30 0.1456 3.70 7 0.1456 3.70 29.3 130 935 1391Grosbeak/AW 636000 322 646100 327 AA 26 0.1564 3.97 7 0.1216 3.09 24.8 110 832 1238Rook/AW 636000 322 644000 326 AA 24 0.1628 4.14 7 0.1085 2.76 22.0 98 785 1168

41、B549133TABLE 1 ContinuedCode NameBConductor SizeClassCStranding ConductorRatedStrengthConductorMass perUnit LengthCross-sectionalArea UsingOnlyAluminumStrand WiresApproximateCross-sectionalArea IncludingNominalAluminumArea in AWStrand WiresDAluminum Aluminum-Clad SteelNum-berofWiresNominalDiameterNu

42、m-berofWiresNominalDiameter(1000lbf) kNlb/1000ft kg/kmcmil mm2 cmil mm2 in. mm in. mmSwift/AW 636000 322 637700 323 AA 36 0.1329 3.38 1 0.1329 3.38 13.6 61 636 946Kingbird/AW 636000 322 639400 324 AA 18 0.1880 4.78 1 0.1880 4.78 15.0 67 676 1006Teal/AW 605000 307 618400 313 AA 30 0.1420 3.61 19 0.08

43、52 2.16 28.5 127 883 1314Wood Duck/AW 605000 307 618800 314 AA 30 0.1420 3.61 7 0.1420 3.61 28.4 126 889 1323Squab/AW 605000 307 614600 311 AA 26 0.1525 3.87 7 0.1186 3.01 23.6 105 791 1177Peacock/AW 605000 307 612700 310 AA 24 0.1588 4.03 7 0.1059 2.69 21.0 93 747 1112Eagle/AW 556500 282 569700 289

44、 AA 30 0.1362 3.46 7 0.1362 3.46 26.8 119 818 1217Dove/AW 556500 282 564800 286 AA 26 0.1463 3.72 7 0.1138 2.89 21.9 97 728 1083Parakeet/AW 556500 282 564000 286 AA 24 0.1523 3.87 7 0.1015 2.58 19.3 86 687 1022Ospray/AW 556500 282 559000 283 AA 18 0.1758 4.47 1 0.1758 4.47 13.2 59 591 880Hen/AW 4770

45、00 242 487900 247 AA 30 0.1261 3.20 7 0.1261 3.20 23.4 104 701 1043Hawk/AW 477000 242 484600 246 AA 26 0.1354 3.44 7 0.1053 2.68 18.9 84 624 929Flicker/AW 477000 242 483000 245 AA 24 0.1410 3.58 7 0.0940 2.39 16.7 74 589 877Pelican/AW 477000 242 479600 243 AA 18 0.1628 4.14 1 0.1628 4.14 11.5 51 507

46、 755Lark/AW 397500 201 406000 206 AA 30 0.1151 2.92 7 0.1151 2.92 19.6 87 584 869Ibls/AW 397500 201 403300 204 AA 26 0.1236 3.14 7 0.0961 2.44 15.8 70 520 774Ibis/AW 397500 201 403300 204 AA 26 0.1236 3.14 7 0.0961 2.44 15.8 70 520 774Brant/AW 397500 201 403000 204 AA 24 0.1287 3.27 7 0.0858 2.18 14

47、.1 63 491 731Chickadee/AW 397500 201 399200 202 AA 18 0.1486 3.77 1 0.1486 3.77 9.8 44 422 628Oriole/AW 336400 170 343700 174 AA 30 0.1059 2.69 7 0.1059 2.69 16.7 74 495 737Oriole/AW 336400 170 343700 174 AA 30 0.1059 2.69 7 0.1059 2.69 16.7 74 495 737Linnet/AW 336400 170 341300 173 AA 26 0.1137 2.8

48、9 7 0.0884 2.25 13.5 60 440 655Merlin/AW 336400 170 337800 171 AA 18 0.1367 3.47 1 0.1367 3.47 8.5 38 357 531Ostrich/AW 300000 152 304800 154 AA 26 0.1074 2.73 7 0.0835 2.12 12.1 54 392 583Partridge/AW 266800 135 271200 137 AA 26 0.1013 2.57 7 0.0788 2.00 10.8 48 349 519Waxwing/AW 266800 135 268400

49、136 AA 18 0.1217 3.09 1 0.1217 3.09 6.8 30 283 421#4/0 Penguin/AW 211600 107 215400 109 AA,A 6 0.1878 4.77 1 0.1878 4.77 7.7 34 277 412Cochin/AW 211300 107 223000 113 AA(+) 12 0.1327 3.37 7 0.1327 3.37 19.8 88 477 710Brahma/AW 203200 103 220700 112 AA(+) 16 0.1127 2.86 19 0.0977 2.48 27.1 121 601 894Dorking/AW 190800 96.7 201900 102 AA(+) 12 0.1261 3.20 7 0.1261 3.20 18.3 81 431 641Dotterel/AW 176900 89.6 187100 95 AA(+) 12 0.1214 3.08 7 0.1214 3.08 16.9 75 399 594#3/0 Pigeon/AW 167800 85.0 170700 86.5 AA,A 6 0.1672 4.25 1 0.1672 4.25 6.3 28 219 326Guinea/AW 159000 80.