ASHRAE GUIDELINE 10 ADD G-2016 Interactions Affecting the Achievement of Acceptable Indoor Environments.pdf

《ASHRAE GUIDELINE 10 ADD G-2016 Interactions Affecting the Achievement of Acceptable Indoor Environments.pdf》由会员分享，可在线阅读，更多相关《ASHRAE GUIDELINE 10 ADD G-2016 Interactions Affecting the Achievement of Acceptable Indoor Environments.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、ASHRAE Addendum g toASHRAE Guideline 10-2011Interactions Affectingthe Achievement ofAcceptable IndoorEnvironmentsApproved by ASHRAE on May 13, 2016.This addendum was approved by a Standing Guideline Project Committee (SGPC) for which the Standards Committee hasestablished a documented program for re

2、gular publication of addenda or revisions, including procedures for timely, docu-mented, consensus action on requests for change to any part of the guideline. The change submittal form, instructions, anddeadlines may be obtained in electronic form from the ASHRAE website (www.ashrae.org) or in paper

3、 form from theSenior Manager of Standards. The latest edition of an ASHRAE Standard may be purchased on the ASHRAE website (www.ashrae.org) or from ASHRAECustomer Service, 1791 Tullie Circle, NE, Atlanta, GA 30329-2305. E-mail: ordersashrae.org. Fax: 678-539-2129. Tele-phone: 404-636-8400 (worldwide

4、), or toll free 1-800-527-4723 (for orders in US and Canada). For reprint permission, goto www.ashrae.org/permissions. 2016 ASHRAE ISSN 1049-894XASHRAE Standing Guideline Project Committee 10Cognizant TC: Environmental Health CommitteeSPLS Liaison: Mark P. ModeraSteven J. Emmerich*, Chair Walter T.

5、Grondzik* Satchidananda PandaMark C. Jackson*, Vice-Chair Josh Jacobs* Roger M. Pasch*Eric W. Adams* Hal Levin* Zuraimi M. Sultan*Eric Brodsky* Frederick M. Marks Lily Wang*Gregory Dobbs Bjarne W. Olesen Pawel WargockiCarl Grimes* Denotes members of voting status when the document was approved for p

6、ublicationASHRAE STANDARDS COMMITTEE 20152016Douglass T. Reindl, Chair Steven J. Emmerich Heather L. PlattRita M. Harrold, Vice-Chair Julie M. Ferguson David RobinJames D. Aswegan Walter T. Grondzik Peter SimmondsNiels Bidstrup Roger L. Hedrick Dennis A. StankeDonald M. Brundage Srinivas Katipamula

7、Wayne H. Stoppelmoor, Jr.John A. Clark Rick A. Larson Jack H. ZarourWaller S. Clements Lawrence C. Markel Julia A. Keen, BOD ExOJohn F. Dunlap Arsen K. Melikov James K. Vallort, COJames W. Earley, Jr. Mark P. ModeraKeith I. Emerson Cyrus H. NasseriStephanie C. Reiniche, Senior Manager of StandardsSP

8、ECIAL NOTEThis Guideline was developed under the auspices of ASHRAE. ASHRAE Guidelines are developed under a review process, identifying a Guidelinefor the design, testing, application, or evaluation of a specific product, concept, or practice. As a Guideline it is not definitive but encompassesarea

9、s where there may be a variety of approaches, none of which must be precisely correct. ASHRAE Guidelines are written to assist professionalsin the area of concern and expertise of ASHRAEs Technical Committees and Task Groups.ASHRAE Guidelines are prepared by Project Committees appointed specifically

10、 for the purpose of writing Guidelines. The Project CommitteeChair and Vice-Chair must be members of ASHRAE; while other committee members may or may not be ASHRAE members, all must be technicallyqualified in the subject area of the Guideline.Development of ASHRAE Guidelines follows procedures simil

11、ar to those for ASHRAE Standards except that (a) committee balance is desiredbut not required, (b) an effort is made to achieve consensus but consensus is not required, (c) Guidelines are not appealable, and (d) Guidelinesare not submitted to ANSI for approval.The Senior Manager of Standards of ASHR

12、AE should be contacted fora. interpretation of the contents of this Guideline,b. participation in the next review of the Guideline,c. offering constructive criticism for improving the Guideline, ord. permission to reprint portions of the Guideline.DISCLAIMERASHRAE uses its best efforts to promulgate

13、 Standards and Guidelines for the benefit of the public in light of available information and acceptedindustry practices. However, ASHRAE does not guarantee, certify, or assure the safety or performance of any products, components, or systemstested, installed, or operated in accordance with ASHRAEs

14、Standards or Guidelines or that any tests conducted under its Standards or Guidelineswill be nonhazardous or free from risk.ASHRAE INDUSTRIAL ADVERTISING POLICY ON STANDARDSASHRAE Standards and Guidelines are established to assist industry and the public by offering a uniform method of testing for r

15、ating purposes, bysuggesting safe practices in designing and installing equipment, by providing proper definitions of this equipment, and by providing other informationthat may serve to guide the industry. The creation of ASHRAE Standards and Guidelines is determined by the need for them, and confor

16、manceto them is completely voluntary.In referring to this Standard or Guideline and in marking of equipment and in advertising, no claim shall be made, either stated or implied,that the product has been approved by ASHRAE. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, dist

17、ribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.ASHRAE Guideline 10-2011 1(This foreword is not part of this guideline. It is merelyinformative and does not contain requirements necessaryfor conformance to the guideline.)FOREWORDThi

18、s addendum revises Table 3 to reflect renaming and reor-ganization of the guideline in a past addendum and to enablereading both vertically and horizontally.Note: In this addendum, changes to the current standardare indicated in the text by underlining (for additions) andstrikethrough (for deletions

19、) unless the instructions specifi-cally mention some other means of indicating the changes. Addendum g to Guideline 10-2011Delete Table 3 and replace with the following.TABLE 3 Sections of the Guideline Concerning Various InteractionsIlluminationThermal IAQ Daylight Electric AcousticThermal 5 (intro

20、), 5.1 5.2 5.3 5.4 5.5IAQ 5.2 6 (intro), 6.16.3 6.5 6.6 6.6Illumination Daylight 5.3 6.5 7.1 7.2 7.3Electric 5.4 6.6 7.2 NA 7.4Acoustic 5.5 6.6 7.3 7.4 9 ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not perm

21、itted without ASHRAEs prior written permission. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.POLICY STATEMENT DEFINING ASHRAES CONCERNFOR THE ENVIRONMEN

22、TAL IMPACT OF ITS ACTIVITIESASHRAE is concerned with the impact of its members activities on both the indoor and outdoor environment.ASHRAEs members will strive to minimize any possible deleterious effect on the indoor and outdoor environment ofthe systems and components in their responsibility whil

23、e maximizing the beneficial effects these systems provide,consistent with accepted Standards and the practical state of the art.ASHRAEs short-range goal is to ensure that the systems and components within its scope do not impact theindoor and outdoor environment to a greater extent than specified by

24、 the Standards and Guidelines as established byitself and other responsible bodies.As an ongoing goal, ASHRAE will, through its Standards Committee and extensive Technical Committee structure,continue to generate up-to-date Standards and Guidelines where appropriate and adopt, recommend, and promote

25、those new and revised Standards developed by other responsible organizations.Through its Handbook, appropriate chapters will contain up-to-date Standards and design considerations as thematerial is systematically revised.ASHRAE will take the lead with respect to dissemination of environmental inform

26、ation of its primary interest andwill seek out and disseminate information from other responsible organizations that is pertinent, as guides to updatingStandards and Guidelines.The effects of the design and selection of equipment and systems will be considered within the scope of thesystems intended

27、 use and expected misuse. The disposal of hazardous materials, if any, will also be considered.ASHRAEs primary concern for environmental impact will be at the site where equipment within ASHRAEs scopeoperates. However, energy source selection and the possible environmental impact due to the energy s

28、ource andenergy transportation will be considered where possible. Recommendations concerning energy source selectionshould be made by its members. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted w

29、ithout ASHRAEs prior written permission.ASHRAE 1791 Tullie Circle NE Atlanta, GA 30329 www.ashrae.org 5/16About ASHRAEASHRAE, founded in 1894, is a global society advancing human well-being through sustainable technology for thebuilt environment. The Society and its members focus on building systems

30、, energy efficiency, indoor air quality,refrigeration, and sustainability. Through research, Standards writing, publishing, certification and continuingeducation, ASHRAE shapes tomorrows built environment today. For more information or to become a member of ASHRAE, visit www.ashrae.org.To stay curre

31、nt with this and other ASHRAE Standards and Guidelines, visit www.ashrae.org/standards.Visit the ASHRAE BookstoreASHRAE offers its Standards and Guidelines in print, as immediately downloadable PDFs, on CD-ROM, and viaASHRAE Digital Collections, which provides online access with automatic updates as

32、 well as historical versions ofpublications. Selected Standards and Guidelines are also offered in redline versions that indicate the changes madebetween the active Standard or Guideline and its previous edition. For more information, visit the Standards andGuidelines section of the ASHRAE Bookstore

33、 at www.ashrae.org/bookstore.IMPORTANT NOTICES ABOUT THIS GUIDELINETo ensure that you have all of the approved addenda, errata, and interpretations for thisGuideline, visit www.ashrae.org/standards to download them free of charge.Addenda, errata, and interpretations for ASHRAE Standards and Guidelines are no longerdistributed with copies of the Standards and Guidelines. ASHRAE provides these addenda,errata, and interpretations only in electronic form to promote more sustainable use ofresources.