ASHRAE FUNDAMENTALS SI CH 39-2013 Codes and Standards.pdf
《ASHRAE FUNDAMENTALS SI CH 39-2013 Codes and Standards.pdf》由会员分享,可在线阅读,更多相关《ASHRAE FUNDAMENTALS SI CH 39-2013 Codes and Standards.pdf(28页珍藏版)》请在麦多课文档分享上搜索。
1、39.1CHAPTER 39CODES AND STANDARDSHE Codes and Standards listed here represent practices, methods, or standards published by the organizations indicated. They areTuseful guides for the practicing engineer in determining test methods, ratings, performance requirements, and limits of HVAC Section IV: H
2、eating Boilers ASME BPVC-2012Fired Steam Generators ASME ASME PTC 4-2008Boiler, Pressure Vessel, and Pressure Piping Code CSA CSA B51-09Testing Standard for Commercial Boilers, 2nd ed. (2007) HYDI HYDI BTS-2007Rating Procedure for Heating Boilers, 6th ed. (2005) HYDI IBRPrevention of Furnace Explosi
3、ons/Implosions in Multiple Burner Boilers NFPA ANSI /NFPA 8502-99Heating, Water Supply, and Power BoilersElectric (2004) UL ANSI/UL 834Boiler and Combustion Systems Hazards Code NFPA NFPA 85-11Gas or Oil Gas-Fired Low-Pressure Steam and Hot Water Boilers CSA ANSI Z21.13-2010/CSA 4.9-2010Controls and
4、 Safety Devices for Automatically Fired Boilers ASME ASME CSD-1-2009Industrial and Commercial Gas-Fired Package Boilers CSA CAN 1-3.1-77 (R2011)Oil-Burning Equipment: Steam and Hot-Water Boilers CSA B140.7-2005 (R2010)Single Burner Boiler Operations NFPA ANSI/NFPA 8501-97Prevention of Furnace Explos
5、ions/Implosions in Multiple Burner Boilers NFPA ANSI/NFPA 8502-99Oil-Fired Boiler Assemblies (1995) UL UL 726Commercial-Industrial Gas Heating Equipment (2011) UL UL 795Standards and Typical Specifications for Tray Type Deaerators, 9th ed. (2011) HEI HEI 2954Terminology Ultimate Boiler Industry Lexi
6、con: Handbook of Power Utility and Boiler Terms and Phrases, 6th ed. (2001)ABMA ABMA 101Building Codes ASTM Standards Used in Building Codes ASTM ASTMPractice for Conducting Visual Assessments for Lead Hazards in Buildings ASTM ASTM E2255-04Standard Practice for Periodic Inspection of Building Facad
7、es for Unsafe Conditions ASTM ASTM E2270-05Standard Practice for Building Enclosure Commissioning ASTM ASTM E2813-12Structural Welding CodeSteel AWS AWS D1.1M/D1.1:2010BOCA National Building Code, 14th ed. (1999) BOCA BNBCUniform Building Code, vol. 1, 2, and 3 (1997) ICBO UBC V1, V2, V3Internationa
8、l Building Code(2012) ICC IBCInternational Code Council Performance Code(2012) ICC ICC PCSelected Codes and Standards Published by Various Societies and Associations (Continued)Subject Title Publisher Reference39.4 2013 ASHRAE HandbookFundamentals (SI)International Existing Building Code(2012) ICC I
9、EBCInternational Energy Conservation Code(2012) ICC IECCInternational Property Maintenance Code(2012) ICC IPMCInternational Residential Code(2009) ICC IRCDirectory of Building Codes and Regulations, State and City Volumes (annual) NCSBCS NCSBCS (electronic only)Building Construction and Safety Code
10、NFPA ANSI/NFPA 5000-2012National Building Code of Canada (2010) NRCC NRCCStandard Building Code (1999) SBCCI SBCMechanical Safety Code for Elevators and Escalators ASME ASME A17.1-2010Natural Gas and Propane Installation Code CSA CAN/CSA-B149.1-10Propane Storage and Handling Code CSA CAN/CSA-B149.2-
11、10Uniform Mechanical Code (2012) IAPMO IAPMOInternational Mechanical Code(2012) ICC IMCInternational Fuel Gas Code(2012) ICC IFGCStandard Gas Code (1999) SBCCI SBCBurners Domestic Gas Conversion Burners CSA ANSI Z21.17-1998/CSA 2.7-M98 (R2009)Installation of Domestic Gas Conversion Burners CSA ANSI
12、Z21.8-1994 (R2010)Installation Code for Oil Burning Equipment CSA CAN/CSA-B139-09Oil-Burning Equipment: General Requirements CSA CAN/CSA-B140.0-03 (R2008)Vapourizing-Type Oil Burners CSA B140.1-1966 (R2011)Atomizing-Type Oil Burners CSA CAN/CSA-B140.2.1-10Pressure Atomizing Oil Burner Nozzles CSA B1
13、40.2.2-1971 (R2011)Oil Burners (2003) UL ANSI/UL 296Waste Oil-Burning Air-Heating Appliances (1995) UL ANSI/UL 296ACommercial-Industrial Gas Heating Equipment (2011) UL UL 795Commercial/Industrial Gas and/or Oil-Burning Assemblies with Emission Reduction Equipment (2006)UL UL 2096Chillers Commercial
14、 Application, Systems, and Equipment, 1st ed. ACCA ACCA Manual CSAbsorption Water Chilling and Water Heating Packages AHRI AHRI 560-2000Water Chilling Packages Using the Vapor Compression Cycle AHRI AHRI551/591-2011Method of Testing Liquid-Chilling Packages ASHRAE ANSI/ASHRAE 30-1995Performance Stan
15、dard for Rating Packaged Water Chillers CSA CAN/CSA C743-09Chimneys Specification for Clay Flue Liners ASTM ASTM C315-07 (2011)Specification for Industrial Chimney Lining Brick ASTM ASTM C980-10Practice for Installing Clay Flue Lining ASTM ASTM C1283-11Guide for Design and Construction of Brick Line
16、rs for Industrial Chimneys ASTM ASTM C1298-95 (2007)Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic (FRP) Chimney Liners with Coal-Fired UnitsASTM ASTM D5364-08Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances NFPA ANSI/NFPA 211-2013Medium Heat Appliance Fac
17、tory-Built Chimneys (2010) UL ANSI/UL 959Factory-Built Chimneys for Residential Type and Building Heating Appliance (2010) UL ANSI/UL 103Cleanrooms Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms ASTM ASTM E2042-09Practice for Design and Construction of Aerospace Cleanrooms an
18、d Contamination Controlled AreasASTM ASTM E2217-12Practice for Tests of Cleanroom Materials ASTM ASTM E2312-11Practice for Aerospace Cleanrooms and Associated Controlled EnvironmentsCleanroom OperationsASTM ASTM E2352-04 (2010)Test Method for Sizing and Counting Airborne Particulate Contamination in
19、 Clean Rooms and Other Dust-Controlled Areas Designed for Electronic and Similar ApplicationsASTM ASTM F25-09Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger ParticlesAST
20、M ASTM F50-12Procedural Standards for Certified Testing of Cleanrooms, 2nd ed. (1996) NEBB NEBBCoils Forced-Circulation Air-Cooling and Air-Heating Coils AHRI AHRI 410-2001Methods of Testing Forced Circulation Air Cooling and Air Heating Coils ASHRAE ANSI/ASHRAE 33-2000Comfort ConditionsThreshold Li
21、mit Values for Physical Agents (updated annually) ACGIH ACGIHGood HVAC Practices for Residential and Commercial Buildings (2003) ACCA ACCAComfort, Air Quality, and Efficiency by Design (1997) ACCA ACCA Manual RSThermal Environmental Conditions for Human Occupancy ASHRAE ANSI/ASHRAE 55-2010Classifica
22、tion for Serviceability of an Office Facility for Thermal Environment and Indoor Air ConditionsASTM ASTM E2320-04 (2012)Selected Codes and Standards Published by Various Societies and Associations (Continued)Subject Title Publisher ReferenceCodes and Standards 39.5Hot EnvironmentsEstimation of the H
23、eat Stress on Working Man, Based on the WBGT Index (Wet Bulb Globe Temperature)ISO ISO 7243:1989Ergonomics of the Thermal EnvironmentAnalytical Determination and Interpretation of Thermal Comfort Using Calculation of the PMV and PPD Indices and Local Thermal Comfort CriteriaISO ISO 7730:2005Ergonomi
24、cs of the Thermal EnvironmentDetermination of Metabolic Rate ISO ISO 8996:2004Ergonomics of the Thermal EnvironmentEstimation of the Thermal Insulation and Water Vapour Resistance of a Clothing EnsembleISO ISO 9920:2007Commissioning The Commissioning Process ASHRAE ASHRAE Guideline 0-2005HVAC Part 2
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASHRAEFUNDAMENTALSSICH392013CODESANDSTANDARDSPDF

链接地址:http://www.mydoc123.com/p-454841.html