ARMY UFGS-23 09 23-2011 LONWORKS DIRECT DIGITAL CONTROL FOR HVAC AND OTHER BUILDING CONTROL SYSTEMS.pdf

《ARMY UFGS-23 09 23-2011 LONWORKS DIRECT DIGITAL CONTROL FOR HVAC AND OTHER BUILDING CONTROL SYSTEMS.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-23 09 23-2011 LONWORKS DIRECT DIGITAL CONTROL FOR HVAC AND OTHER BUILDING CONTROL SYSTEMS.pdf（116页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-23 09 23 (May 2011)-Preparing Activity: USACE SupersedingUFGS-23 09 23 (May 2010)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2011*SECTION TABLE OF CONTENTSDIVISION 23 - HEATING, VENTILATING, AND AIR CONDITIONINGSECTI

2、ON 23 09 23LONWORKS DIRECT DIGITAL CONTROL FOR HVAC AND OTHER BUILDING CONTROL SYSTEMS05/11PART 1 GENERAL1.1 REFERENCES1.2 DEFINITIONS1.3 SYSTEM DESCRIPTION1.3.1 System Requirements1.3.2 Verification of Dimensions1.3.3 Drawings1.3.4 Data Packages/Submittals Requirements1.4 SUBMITTALS1.5 PROJECT SEQU

3、ENCING1.6 QUALITY CONTROL (QC) CHECKLISTS1.7 DELIVERY AND STORAGE1.8 OPERATION AND MAINTENANCE (O Errata 2010) Fundamentals Handbook, I-P EditionASHRAE FUN SI (2009; Errata 2010) Fundamentals Handbook, SI EditionASME INTERNATIONAL (ASME)ASME B16.15 (2006) Cast Bronze Alloy Threaded Fittings Classes

4、125 and 250ASME B16.34 (2009; Supp 2010) Valves - Flanged, Threaded and Welding EndASME B40.100 (2005) Pressure Gauges and Gauge AttachmentsASME BPVC SEC VIII D1 (2007; Addenda 2008; Addenda 2009) BPVC Section VIII-Rules for Construction of Pressure Vessels Division 1ASTM INTERNATIONAL (ASTM)ASTM A2

5、69 (2010) Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General ServiceASTM A536 (1984; R 2009) Standard Specification for Ductile Iron CastingsASTM B88 (2009) Standard Specification for Seamless Copper Water TubeASTM B88M (2005) Standard Specification for Seam

6、less Copper Water Tube (Metric)ASTM D 1693 (2008) Standard Test Method for Environmental Stress-Cracking of Ethylene PlasticsSECTION 23 09 23 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASTM D 635 (2010) Standard Test Method for Rate of Bur

7、ning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal PositionCONSUMER ELECTRONICS ASSOCIATION (CEA)CEA-709.1-C (2010) Control Network Protocol SpecificationCEA-709.3 (1999; R 2004) Free-Topology Twisted-Pair Channel SpecificationCEA-852-B (2010) Tunneling Component Netw

8、ork Protocols Over Internet Protocol ChannelsFLUID CONTROLS INSTITUTE (FCI)FCI 70-2 (2006) Control Valve Seat LeakageINSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)IEEE 142 (2007) Recommended Practice for Grounding of Industrial and Commercial Power Systems - IEEE Green BookIEEE C62.41 (199

9、1; R 1995) Recommended Practice on Surge Voltages in Low-Voltage AC Power CircuitsISA - INTERNATIONAL SOCIETY OF AUTOMATION (ISA)ISA 7.0.01 (1996) Quality Standard for Instrument AirLONMARK INTERNATIONAL (LonMark)LonMark Interoperability Guide (2005) LonMark Application-Layer Interoperability Guide

10、and LonMark Layer 1-6 Interoperability Guide; Version 3.4LonMark SCPT List (2003) LonMark SCPT Master List; Version 12LonMark SNVT List (2003) LonMark SNVT Master List; Version 113LonMark XIF Guide (2001) LonMark External Interface File Reference Guide; Revision 4.402NATIONAL ELECTRICAL MANUFACTURER

11、S ASSOCIATION (NEMA)ANSI C12.1 (2008) Electric Meters Code for Electricity MeteringANSI C12.20 (2010) Electricity Meters - 0.2 and 0.5 Accuracy ClassesNEMA 250 (2008) Enclosures for Electrical Equipment (1000 Volts Maximum)SECTION 23 09 23 Page 9Provided by IHSNot for ResaleNo reproduction or networ

12、king permitted without license from IHS-,-,-NEMA/ANSI C12.10 (2004) Physical Aspects of Watthour Meters - Safety StandardsNATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 70 (2011; TIA 11-1; Errata 2011) National Electrical CodeNFPA 90A (2009; Errata 09-1) Standard for the Installation of Air Conditi

13、oning and Ventilating SystemsTHE INTERNET ENGINEERING TASK FORCE (IETF)RFC 2131 (1997) Dynamic Host Configuration ProtocolU.S. FEDERAL COMMUNICATIONS COMMISSION (FCC)FCC Part 15 Radio Frequency Devices (47 CFR 15)UNDERWRITERS LABORATORIES (UL)UL 5085-3 (2006; Reprint May 2011) Low Voltage Transforme

14、rs - Part 3: Class 2 and Class 3 TransformersUL 555 (2006; Reprint May 2011) Standard for Fire DampersUL 555S (1999; Reprint May 2011) Smoke DampersUL 916 (2007; Reprint Jun 2010) Standard for Energy Management EquipmentUL 94 (1996; Reprint Oct 2010) Standard for Tests for Flammability of Plastic Ma

15、terials for Parts in Devices and Appliances1.2 DEFINITIONSThe following list of definitions may contain terms not found elsewhere in the Section but are included here for completeness.a. Application Generic Controller (AGC): A device that is furnished with a (limited) pre-established application tha

16、t also has the capability of being programmed. Further, the ProgramID and XIF file of the device are fixed. The programming capability of an AGC may be less flexible than that of a General Purpose Programmable Controller (GPPC). b. Application Specific Controller (ASC): A device that is furnished wi

17、th a pre-established built in application that is configurable but not re-programmable. An ASC has a fixed factory-installed application program (i.e Program ID) with configurable settings.c. Binary: A two-state system where an “ON“ condition is represented by a high signal level and an “OFF“ condit

18、ion is represented by a low signal level. Digital is sometimes used interchangeably with binary.SECTION 23 09 23 Page 10Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-d. Binding: The act of establishing communications between CEA-709.1-C devices by

19、associating the output of a device to the input of another so that information is automatically (and regularly) sent.e. Building Control Network (BCN): The CEA-709.1-C control network consisting of one or more TP/FT-10 channels, and possibly a single TP/XF-1250 channel, in doubly terminated bus topo

20、logy.f. Building Point of Connection (BPOC): The BPOC is the point of connection between the UMCS network backbone (an IP network) and the building control network backbone. The hardware at this location, that provides the connection is referred to as the BPOC Hardware. In general, the term “BPOC Lo

21、cation“ means the place where this connection occurs, and “BPOC Hardware“ means the device that provides the connection. Sometimes the term “BPOC“ is used to mean either and its actual meaning (i.e. location or hardware) is determined by the context in which it is used.g. Channel: A portion of the c

22、ontrol network consisting of one or more segments connected by repeaters. Channels are separated by routers. The device quantity limitation is dependent on the topology/media and device type. For example, a TP/FT-10 network with locally powered devices is limited to 128 devices per channel.h. Comman

23、dable: See Overridable.i. Configuration Property: Controller parameter used by the application which is usually set during installation/testing and seldom changed. For example, the P and I settings of a P-I control loop. Also see Standard Configuration Property Type (SCPT)j. Control Logic Diagram: A

24、 graphical representation of control logic for multiple processes that make up a system.k. Domain: A grouping of up to 32,385 nodes that can communicate directly with each other. (Devices in different domains cannot communicate directly with each other.) See also Node Address.l. Explicit Messaging:

25、A non-standard and often vendor (application) specific method of communication between devices where each message contains a message code that identifies the type of message and the devices use these codes to determine the action to take when the message is received.m. External Interface File (XIF):

26、 A file which documents a devices external interface, specifically the number and types of LonMark objects, the number, types, directions, and connection attributes of network variables, and the number of message tags.n. Functional Profile: A standard description, defined by LonMark, of one or more

27、LonMark Objects used to classify and certify devices.o. Gateway: A device that translates from one protocol application data format to another. Devices that change only the transport mechanism of the protocol - “translating“ from TP/FT-10 to Ethernet/IP for example - are not gateways as the underlyi

28、ng data format does not change. Gateways are also called Communications Bridges or Protocol Translators.SECTION 23 09 23 Page 11Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-p. General Purpose Programmable Controller (GPPC): Unlike an ASC or AGC, a

29、 GPPC is not furnished with a fixed application program and does not have a fixed ProgramID or XIF file. A GPPC can be (re-)programmed, usually using vendor-supplied software. When a change to the program affects the external interface (and the XIF file) the ProgramID will changeq. LonMark Object: A

30、 collection of network variables, configuration properties, and associated behavior defined by LonMark International and described by a Functional Profile. It defines how information is exchanged between devices on a network (inputs from and outputs to the network).r. LNS Plug-in: Software which run

31、s in an LNS compatible software tool, typically a network configuration tool. Device configuration plug-ins provide a user friendly method to edit a devices configuration properties.s. LonMark: See LonMark International. Also, a certification issued by LonMark International to CEA-709.1-C devices.t.

32、 LonMark International: Standards committee consisting of numerous independent product developers, system integrators and end users dedicated to determining and maintaining the interoperability guidelines for LonWorks. Maintains guidelines for the interoperability of CEA-709.1-C devices and issues t

33、he LonMark Certification for CEA-709.1-C devices.u. LonMark Interoperability Association: See LonMark International.v. LonWorks: The term used to refer to the overall technology related to the CEA-709.1-C protocol (sometimes called “LonTalk“), (including the protocol itself, network management, inte

34、roperability guidelines and products.w. LonWorks Network Services (LNS): A network management and database standard for CEA-709.1-C devices.x. Monitoring and Control (M some refer to this capability as “commandable“ and some use this term to refer to changing a value from a configuration tool. ee. P

35、olling: A device requesting data from another device.ff. Program ID: An identifier (number) stored in the device (usually EEPROM) that identifies the node manufacturer, functionality of device (application “DO“ for District Office (Engineering Division or other organization in the District Office);

36、“AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government

37、approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. Submit the

38、 following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES, and TABLE I. PROJECT SEQUENCING:SD-02 Shop DrawingsDDC Contractor Design Drawings; G; G, _Draft As-Built Drawings; G; G, _Final As-Built Drawings; G; G, _SD-03 Product DataManufacturers Catalog Data; G; G, _Programming Software; G;

39、 G, _GPPC Application Programs; G; G, _AGC Application Programs; G; G, _XIF files; G; G, _Draft LNS Database; G; G, _Final LNS Database; G; G, _LNS Plug-in; G; G, _SD-06 Test ReportsExisting Conditions Report; G; G, _Start-Up and Start-Up Testing Report; G; G, _PVT Procedures; G; G, _PVT Report; G;

40、G, _Pre-Construction QC Checklist; G; G, _SECTION 23 09 23 Page 17Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Post-Construction QC Checklist; G; G, _SD-10 Operation and Maintenance DataOperation and Maintenance (O G; G, _Training Documentation; G

41、; G, _SD-11 Closeout SubmittalsCloseout QC Checklist; G; G, _1.5 PROJECT SEQUENCINGTABLE I: PROJECT SEQUENCING lists the sequencing of submittals as specified in paragraph SUBMITTALS (denoted by an S in the TYPE column) and activities as specified in PART 3: EXECUTION (denoted by an E in the TYPE co

42、lumn). TABLE I does not specify overall project milestone and completion dates; these dates are specified in the contract documents_.a. Sequencing for submittals: The sequencing specified for submittals is the deadline by which the submittal shall be initially submitted to the Government. Following

43、submission there will be a Government review period as specified in Section 01 33 00 SUBMITTAL PROCEDURES. If the submittal is not accepted by the Government, revise the submittal and resubmit it to the Government within 14_ days of notification that the submittal has been rejected. Upon resubmittal

44、 there will be an additional Government review period. If the submittal is not accepted the process repeats until the submittal is accepted by the Government.b. Sequencing for Activities: The sequencing specified for activities indicates the earliest the activity may begin.c. Abbreviations: In TABLE

45、 I the abbreviation AAO is used for after approval of and ACO is used for after completion of.TABLE I. PROJECT SEQUENCINGSEQUENCING(START OF ACTIVITY orITEM # TYPE DESCRIPTION DEADLINE FOR SUBMITTAL)- - - -1 S Existing Conditions Report 2 S DDC Contractor Design Drawings 3 S Manufacturers Catalog Da

46、ta 4 S Network Bandwidth UsageCalculations 5 S Pre-construction QC Checklist 6 E Install Building Control System AAO #1 thru #57 E Start-Up and Start-Up Testing ACO #6 8 S Post-Construction QC Checklist _ days ACO #79 S Programming Software _ days ACO #710 S XIF Files _ days ACO #711 S LNS Plug-ins _ days ACO #712 S Start-Up and Start-Up _ days ACO #7Testing Report 13 S Draft As-Built Drawings _ days ACO #714 S Draft LNS Database _ days ACO #7 SECTION 23 09 23 Page 18Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-