ARMY MIL-T-62058 E-1992 TRUCKS FLATBED AND TRUCKS MAINTENANCE WITH TELESCOPIC BOOM MOUNTED AERIAL PLATFORM 8 5 TO 18 3 METERS (28 TO 60 FOOT) MODIFIED COMMERCIAL《8 5至18 3米(28至60英尺).pdf

《ARMY MIL-T-62058 E-1992 TRUCKS FLATBED AND TRUCKS MAINTENANCE WITH TELESCOPIC BOOM MOUNTED AERIAL PLATFORM 8 5 TO 18 3 METERS (28 TO 60 FOOT) MODIFIED COMMERCIAL《8 5至18 3米(28至60英尺).pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-T-62058 E-1992 TRUCKS FLATBED AND TRUCKS MAINTENANCE WITH TELESCOPIC BOOM MOUNTED AERIAL PLATFORM 8 5 TO 18 3 METERS (28 TO 60 FOOT) MODIFIED COMMERCIAL《8 5至18 3米(28至60英尺).pdf（57页珍藏版）》请在麦多课文档分享上搜索。

1、NOT MEASUREMENT SENSITIVE MIL-T-62058E(AT) 14 Febrwrv 1993, SUPERSEDING I3 March 19/35 - MIL-T-62058D(AT) MILITARY SPECIFICATION TRUCKS, FLATBED: AND TRUCKS, MAINTENANCE: WITH TELESCOPIC BOOM MODIFIED COMMERCIAL MOUNTED AERIAL PLATFORM, 8.5 TO 18-3 METERS (28 TO 60 FOOT), This specification is appro

2、ved for use by the US Army Tank- Automotive Command, Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense- 1. SCOPE 1.1 Scoxlp,. This specification covers diesel and gasoline engine driven, four-wheel, two-rear-wheel drive; four-wheel, four-wh

3、eel drive; and six-wheel, four-rear-wheel drive; 6350 to 20 200 kilograms (kg) (14,000 to 44,500 pounds) gross vehicle weight (GVW), commercial trucks equipped with a flatbed or maintenance body and a 8.5 to 18.3 meters (m) (28 to 60 foot) telescopic boom aerial platform. Vehicles procured under thi

4、s specification are commercial items which are be warranted by the manufacturer as specified in acquisition documents- Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: US Army Tank-Automotive Com

5、mand, ATTN: AMSTA-UED, Warren, MI 48397-5000, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A I FSC-2320 I ;- Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo

6、reproduction or networking permitted without license from IHS-,-,- MIL-T-62058E 23 9999906 0522728 2 MIL-T-62058E (AT) . The vehicle shall be one of the following body 1.2 j larger size as indicated in table I- TABLE I. Vehicle clas8a;fa cat I.-. Size 28 32 35 45 50 60 Class Model 4x2 or 4x4 4x2 or

7、4x4 4x2 or 4x4 4x2 or 4x4 4x2 or 4x4 6x4 Ground to aerial basket floor height meters (feet) 8.5 (28) 9.8 (52) 10. i (35) 13.7 (45) 15.2 (501 18.3 (60) 1.2.2 ka. “he vehicle shall be one of the classes in table II, as specified (see 6.2)- TABLE II. !2VW ratinas. - -.-. %-,., -1- B 7250 ( 16,000.i C 8

8、600 (19,000) D i0 900 (24,000) E 14 500 (32,000) P 20 200 (44,500) 1.2.3 Model. The vehicle shall be one of the following models, as specified (see 6.2). 4x2 model - 4 wheels, 2 wheels driving 4x4 model - 4 wheels, 4 wheels driving 6x4 model - 6 wheels, 4 wheels driving. 2 Provided by IHSNot for Res

9、aleNo reproduction or networking permitted without license from IHS-,-,-2. APPLICABLE WCUMENTS 2-1 Govwnment doc-. . The following * 2.1.1 Swcifications. standwds- and handbooks specifications, standards, and handbooks form a part of this document to the extent specified herein. documents are those

10、listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). SPECIFICATIONS * Unless otherwise specified, the issues of these f- c FEDERAL FI-B- 131 - Battery, Storage: Vehicular, Ignition, T Lighting, an

11、d Starting. * W-F-800 - Fuel Gil, Diesel MILITARY MI L-P-5 14 - Plates, Identification, Instruction and Marking, Blank. * MIL-T-5624 - Turbine Fuel, Aviation, Grades JP-4 and JP-5 - Weather, Operational and Preservative. MIL-B-46176 - Brake Fluid, Silicone, Automotive All * MIL-T-83133 - Turbine Fue

12、l, Aviation, Kerosene Type, Grade MIL-H-83282 JP-8. - Hydraulic Fluid, Fire-Resistant, Synthetic Hydrocarbon Base, Aircraft, NATO Code Number H-537. STANDARDS FEDERAL FED-STD-297 - Rustproofing of Commercial (Nontactical) FED-STD-595 - Colors. Vehicles - MILITARY MIL-STD-1223 - Nontactical Wheeled V

13、ehicles Treatment, Painting, Identification Marking, and Data Plate Standards - Capacity, Manual Release. MS 51118 - Pintle Assembly, Towing-40,000 Lbs. MS 51317 - Light, Warning, Vehicular, Rotating, D.C. MS 51335 - Pintle Assembly, Towing - 18,000 Lbs. Capacity, Manual Release. * specifications, s

14、tandards, and handbooks are available from the Naval hbiications and Forms Center, Military Specifications and Standards, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) (Unless otherwise indicated, copies of federal and military 3 Provided by IHSNot for ResaleNo reproduction or networki

15、ng permitted without license from IHS-,-,-MIL-T-6205E 23 m 999990b 0522730 O * 2.1.2 QtkierGovernment documentaci, draags. and publicatu . The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. the issues are those cited in t

16、he solicitation. Unless otherwise specified, ;i: DEPARTMENT OF DEFENSE (DoD) Department of Defense Index of Specifications and Standards (WDISS). (Copies of the DODISS are available on a yearly subscription basis either from the Government Printing Office for hard copy, or microfiche copies are avai

17、lable from the Director, Navy Riblication and Printing Service Office, 700 Robbins Avenue, Philadelphia, PA 19111-5093.) % DEPARTMENT OF TRANSFQRTATION (DOT) Federal Motor Carrier Safety Regulations. Federal Motor Vehicle Safety Standards- *3 (Application for copies of DOT publications should refere

18、nce the cade of Federal Regulations, 49 CFR, and the Federal Register, and should be addressed to the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.) ENVIRONMENTAL PROTECTION AGENCY (EPA) Control of Air Pollution from New Motor Vehicles and New Motor Vehicle No

19、ise Emission Standards for Transportation Equipment - Medium and Engines - Heavy Trucks. (Application for copies of EPA publications should reference the Code of Federal Regulations, 40 CFR, and the Federal Register and should be addressed to the Superintendent of Documents, U.S. Government Printing

20、 Office, Washington, D.C. 20402.) t * OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA) Occupational Safety and Health Standards. 1926.556 - Aerial Lifts. (Application for copies of OSHA publications should reference the Code of Federal Regulations, Title 29, and should be addressed to the Superi

21、ntendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.) * 2.2 Non - Goverunni-, . The following documents form a part of this document to the extent specified herein. the issues of the documents which are DoD adopted are those listed in the issue of the DODISS cited in the s

22、olicitation. the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.2). Unless otherwise specified, Unless otherwise specified, 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-6205E 2

23、3 9 7949906 0522733 2 - - - _ AMERICAN NATIONAL STANDARDS INSTITUTE, INC. (ANSI) ANSI A92.2 - American National Standard for Veliicle- Mounted Elevating and Rotating Aerial Devices - (Application for copies of ANSI publications should be addressed to the American National Standards Institute, Inc.,

24、1430 Broadway, New York, NY lIOl8. ) AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ASTM Al20 - Pipe, Steel, Black and Hot-Dipped, Zinc-Coated (Galvanized) Welded and Seamless for Ordinary Uses (WU adoptedi. (DOD adopted). * ASTM D 4985 - Standard Specification for Low Silicate Ethylene Glycol Ba

25、se Engine Coolant for Heavy Duty Engines Requiring an Initial LCkarge of Stipplemental Coolant Additive. ASTM Bi17 - Standard Method of Salt Spray (Fog) Testing (Application for copies of ASTM publications should be addressed to the American Society for Testing and Materials, 1916 Race Street, Phila

26、delphia, PA 19103.) * THE EUROPEAN TYHE AND RIM TECHNICAL ORGANISATION (ETRTO) Standards Manual (Application for copies of the ETRTO publicatians should be addressed to the European Tyre and Rim Technical Organisation, 32, Avenue Brueann, 1060 Brussels, Belgium-) NATIONAL FIRE PROTECTION ASSOCIATION

27、 (NFPA) NFPA Na. 70 - National Electric Code. (Application for copies of NFPA publications should be addressed to the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.) SAE, INC. 5318 SAE Standards and Recommended Practices. - Air Brake Gladhand Service (Control) and Emergen

28、cy (Supply) Line Couplers - Trucks, Truck-Tractors, and Trailers (DoD adopted). Sized Engines (DoD adopted). J350 J537 J551 - Spark Arrester Test Procedure for Medium - Storage Batteries (Don adopted). - Performance Levels and Methods of Measurement of Electromagnetic Radiation from Vehicles and Dev

29、ices (30-1000 tMz). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. J550 3588 5589 J682 5683 J688 5704 5706 J44 51067 J i292 51349 MIL-T-6205BE (AT) - Seven-Conductor Electrical Connector for - Turn Signal Lamps. - “urn Signal Switch. - Rear Wheel

30、Splash and Stone Throw Protection (DoD adopted). - Tire L%ain Clearance, Trucks, Buses, and Combinations of Vehicles (DUD adopted). - Truck Ability Prediction Procedure (Don adopted). - Openings for Six- and Eight-Bolt Truck Transmission Mounted Power Take-offs (Doi adapted). adopted) . Truck-Traile

31、r Connections. and Motor Coach Wiring. Diesel. Truck-Trailer Jimper Cable. - Rating of Flinches. - Nonmetallic Air Brake System Tubing (bD - Seven-Conductoi? Jacketed Cable for - Automobile, Truck, Truck-Tractor, Trailer, - Engine Power Test Code - Spark Ignition and MIL-T-6205E 23 9999906 0522732 4

32、 (Application for copies of SAE publications should be addressed to the CAE, Inc., 400 Commonwealth Prive, Warrendale, PA 15096.) THE TIRE ANP RIM ASSOCIATION, I“. Pear Book. * should be addressed to the Tire and Rim Association, lnc., 175 Montrose West Ave. , Copley, OH 44321. ) (Application for co

33、pies of the Tire and Rim Association publications * from the organizations that prepare or distribute the documents. documents also may be available in or through libraries or other informational services.) (Non-Government standards and other publications are normally available These * 2.3 Qrder of

34、wecede-. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS * 3.1 . body

35、; basket or aerial platform assembly in stowed position: and a fill1 complement of fuel, lubricants and coolant. 3.2.6 of the basket or aerial platform, with hydraulic fluid stabilized at ambient air temperature. 1. a. . 0 The creep and settling shall be 3.4 Chassis cwomxion, four-stroke cycle gasol

36、ine engine. Ferformance when operated on unleaded fuel with a research octane rating of 91, at engine speed not more than the manufacturers recommended operating speed. The engine shall be capable of warranted operation on unleaded fuel when used in accordance with the operators manual. Net poner fi

37、gures used in performance calculations shall be determined in accordance with or SAE 51349. Unless otherwise specified or required by foreign laws, vehicles for overse.as use shall be capable of accepting and operating on leaded gasoline. Ciass II E and F vehicles shall be provided with a fan clutch

38、. The engine furnished shall produce the required vehicle 3.4.1.3 fiter. A full flow type oil filter shali be furnished. 3.4.1.4 Governor ._ For cl.ass C, U, E and F vehicles, an engine governor snal.1 be furnished and set. and sealed to limit the engine to the engine manufacturer s maximum recommen

39、ded operating speed. MIL-T-6205E 23 W 9999906 0522742 7 M 2- 3.4.1.5 Coolina svstem . The cooling system shall maintain the engine coolant at a temperature below the boiling point with the vehicle loaded to GW and operated at an altitude of 3050 meters (m) (10,000 feet) above sea levei or in an ambi

40、ent air temperature of not Less than 520 Celsius (OC) (125 degrees Fahrenheit (OF):!. The coolant system shall include a surge zank or a coolant, recovery reservoir of not less than 1.89 liter (L) (two-quart) capacity. For cooling system servicing, see 3.4.25.1. .% 3.4.1.6 Fan cl utch. A fan clutch

41、shall be provided. The fan clutch shall reduce the fa speed automatically when the fan is not required for engine cooling. The fan clutch shall be asbestos free. * 3.4.1.7 Cooiant temDeratut -e control. Thermostatic control of engine coolant temperature shall be provided. On diesel engine driven veh

42、icles, the control shall include complete thermostatic control of all flow through the radiator - 3.4.1.8 Silicon e rubber hose P. When specified (see 6.21, silicone rubber radiator and heater hoces shall be furnished. * 3.4.1.9 Poner plant heaters and f ue 1 war= - When specified (see 6.2), a coola

43、nt heater; an engine oil heater; and fuel warmers (diesel engine driven vehicles only) shall be provided. alternating current (ac), and shall be wired through a junction block, including a fuse or circuit breaker, to a single, three-pronged (male), weatherproof, slave receptacle for receiving extern

44、al power and grounding vehicle. as near the cab door as possible. A three-wire connecting cable, not less than 7600 mm (25 feet) long and of adequate line capacity to supply power for ali heater units simultaneously, shall be furnished. The connecting cable Heaters shall operate on ll-volt The recep

45、tacle shall be located on the streetside of the vehicle, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-shall include a matching female connector at the vehicle end and a standard weatherproof, three-pronged (two power plus one ground) male connecto

46、r at the other end. Safety Regulation 393.77()(7). Electrical insulation of the connecting cable shall withstand normal operating stresses in low ambient air temperatures (down to -510C (-60oF) without cracking or loss of dielectric capacity. All heater lead wires shall be installed without interfer

47、ing with vehicle component operation, and without loose excess wire. Provisions for stowage of the cable shall be provided in the vehicle cab. Heaters and fuel warmers shall be furnished as follows: Electrical apparatus shall conform to Federal Motor Carrier c 4 * * e t 0 (a) A coolant heater, 1500-

48、watt (W) minimum rating, shall be installed in the engine block or lower coolant inlet hose. thermostat with an operating range of 77oC (170oFI to 9DOC (1950F) shall be installed. An oil pan heater of the permanent external surface mount, permanent in-pan moimt, or immersion type that meets the foll

49、owing requirements, shall be installed: * (i) Not less than 16 W/L (15 watts per quart) heating capacity (2) Not more than 2.8 watts per square centimeter (W/cm) (3) (4) Provision for mounting below minimum service oil level, An in-line fuel warmer or preheater unit shall be provided on diesel engine driven vehicles to prevent clogging of fuel filters due to wax crystallization in the fuel. The unit shall use engine coolant to transfer suf