ARMY MIL-L-43466 C (1)-1987 LINER EXTREME COLD WEATHER PARKA《皮外衣极冷天气衬里》.pdf

《ARMY MIL-L-43466 C (1)-1987 LINER EXTREME COLD WEATHER PARKA《皮外衣极冷天气衬里》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-L-43466 C (1)-1987 LINER EXTREME COLD WEATHER PARKA《皮外衣极冷天气衬里》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-L-43466C AMENDMENT- 1 16 Se Clothing, Personal Equipment and Equipage; General Specification For“. Under Military Standards: Delete “MIL-STD-1188 - Commercial Packaging of Supplies and Equipment“ and add “MIL-STD-147 - Palletized Unit Loads“ and “MIL-STD-731 - Quality of Wood Members for Contain

2、ers and Pallets.“ Add new paragraphs: “2.2 Other publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted shall be those listed in the issue pf the DODISS specified in the solicita

3、tion. Unless otherwise specified, the issues of documents not listed in the DODISS shall be the issues of the nongovernment documents which are current on the date of the solicitation. AMERICAN SOCIETY D 3951 - Standard (Application for copies should Testing and Materials, 1916 Race FOR TESTING AND

4、MATERIALS (ASTM) . Practice for Commercial Packaging . be addressed to the American Society for . Street, Philadelphia, PA .19103.) COLOR ASSOCIATION OF THE UNITED STATES, INC. Department of Defense Standard Slacks (Application for copies should be addressed to the Color Association of the United St

5、ates, Inc., 343 Lexington Avenue, New York, NY 10016. AMSC N/A Page f of 4 FSC 8415 DISTRIBUTION STATEMENT A. L 1 Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-L-Lt34bbC (1) 8Ll 777970b 03

6、73787 O MIL-L-43466C Amendment-1 PAGE 2 (contd) (Technical society and technical association documents are generally available for reference from libraries. and using Federal agencies. ) They are also distributed among technical groups 2.3 Order of precedence. In the event of a conflict between the

7、text of this document and the references cited herein, the text of this document shall take precedence. Nothing in this document, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained.“ PAGE 3 3.2.6, line 2, after “DDD-L-20.“: Add “The color shall be

8、Medium Green, Cable Nos. 70034, 70130, or 70131.“ PAGE 16 4.2.2.1, under material defects: Delete defect e. entirely and substitute “e. More than 1-1/2 inches of broken or missing stitches in the quilting stitching - Minor .B. I PAGE 23 Add new paragraph: “4.2.4 Palletization examination. The fully

9、packaged and palletized end items shall be examined for the defects listed below. The lot size shall be expressed in units of palletized unit loads. The sample unit shall be one palletized unit load, fully packaged. The inspection level shall be S-1 and the AQL, expressed in terms of defects per hun

10、dred units, shall be 6.5. Examine Defect Finished dimensions Length, width, or height exceeds specified maximum requirement. Palletization Pallet pattern not as specified Interlocking of loads not as specified. Load not bonded as specified. Weight . Exceeds maximum load limits. Mark i ng (knitted; i

11、ncorrect; illegible; of improper size location, ,sequence, or method of applicationi“ 5.1.2: Delete “MIL-STD-1188“ and substitute “ASTM D 3951“. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-L-43466C Amendment-1 PAGE 24 5.2.1, line 10: Delete

12、 “type I, grade B of UU-P-268“ and substitute “A-A-203“. At the end of the paragraph: loads in accordance with MIL-L-35078 for the type and class of load specified (see 6.2). II, class F loads.“ . 5.2.2, line 10: Delete “type I, grade B of -P-268“ and substitute “A-A-203“. Add “Shipping containers s

13、hall be arranged in unit Strapping shall be limited to nonmetallic strapping, except for type 2.- 5.2.3: Delete “MIL-STD-1188“ and substitute “ASTM D 3951“. 5.3: Delete and substitute: l5.3 Marking. In addition to special marking required by the contract or purchase order, unit packs, shipping conta

14、iners and palletized unit loads shall be marked in accordance with MIL-STD-129 or ASTM D 3951, as applicable.“ I PAGE 25 c 5.3.1, line 3: Delete “SIZES“ and substitute “NSNs“. Line 5: Delete “sizes“ and substitute “NSNs“. Add new paragraph: “5.4 Palletization. When specified (see 6.2), liners, packe

15、d as .specified in 5.2.2 and 5.2.3 shall be palletized on a 4-way entry pallet in accordance with load type Ia of MIL-STD-147. Pallet types shall be type I (4-way entry), type IV, or type V in accordance with MIL-STD-147. Pallets shall be fabricated from wood groups I, II, III, or IV of MIL-STD-731.

16、 Each prepared load shall be bonded with primary and secondary straps in accordance with bonding means K and L or film bonding means O or P. Pallet pattern shall be number 3 in accordance with the appendix of MIL-STD-147. reversing the pattern of each course.“ 6.2 Ordering data: Add “e. Type and cla

17、ss of unit load required (see 5.2.1). Interlocking of loads shall be effected by f. When palletization is required (see 5.4). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_- MIL-L-4m 4 m 7779706 0373773 7 m MIL-L-43466C Amendment-1 Custodians: Army - GL Navy - NU Review Activities: Army - MD DLA - CT User Activity: . Navy - MC (- Preparing Activity: Army - GL Project No. 8415-0562 i - 4 ! I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-