ARMY MIL-DTL-11484 312 B-2010 LAPEL BUTTON AFGHANISTAN CAMPAIGN MEDAL《翻领纽扣 阿富汗战争勋章》.pdf
《ARMY MIL-DTL-11484 312 B-2010 LAPEL BUTTON AFGHANISTAN CAMPAIGN MEDAL《翻领纽扣 阿富汗战争勋章》.pdf》由会员分享,可在线阅读,更多相关《ARMY MIL-DTL-11484 312 B-2010 LAPEL BUTTON AFGHANISTAN CAMPAIGN MEDAL《翻领纽扣 阿富汗战争勋章》.pdf(2页珍藏版)》请在麦多课文档分享上搜索。
1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET LAPEL BUTTON, AFGHANISTAN CAMPAIGN MEDAL This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet
2、 and the latest issue of MIL-DTL-11484. MATERIAL: Not less than 85/15 Rich-Low Brass FINISH: Hard Enameled or Epoxied, 24K Gold Plated, Mirror-like Polished and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 6. DIMENSIONS: HEIGHT: 9/64 inch (REF) WIDTH: 21/32 inch (REF) THICKN
3、ESS (at edge): 0.065 0.005 inch INCH-POUND MIL-DTL-11484/312B 10 March 2010 SUPERSEDING MIL-DTL-11484/312A 10 May 2005 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/312B Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements
4、taken from the Government furnished hub or die. 2. Attaching device shall be prong with pick and wing type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. 3. Enameled/epoxied areas shall be as shown. When hard enamel is used, the material requiremen
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ARMYMILDTL11484312B2010LAPELBUTTONAFGHANISTANCAMPAIGNMEDAL 翻领 纽扣 阿富汗战争 勋章 PDF

链接地址:http://www.mydoc123.com/p-442682.html