ARMY MIL-DTL-11484 309 A-2009 LAPEL BUTTON INSTRUCTOR'S AWARD SILVER ARMY JROTC《翻领纽扣 陆军初级预备役军官训练营(JROTC)教练银奖》.pdf

《ARMY MIL-DTL-11484 309 A-2009 LAPEL BUTTON INSTRUCTOR'S AWARD SILVER ARMY JROTC《翻领纽扣 陆军初级预备役军官训练营(JROTC)教练银奖》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-11484 309 A-2009 LAPEL BUTTON INSTRUCTOR'S AWARD SILVER ARMY JROTC《翻领纽扣 陆军初级预备役军官训练营(JROTC)教练银奖》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-11484/309A 1 August 2009 SUPERSEDING MIL-DTL-11484/309 30 August 2004 DETAIL SPECIFICATION SHEET LAPEL BUTTON, INSTRUCTORS AWARD, SILVER, ARMY JROTC This specification is approved for use by all Departments and Agencies of the Department of Defense. T

2、he requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Gilding Metal or Red Brass FINISH: Hard Enameled or Epoxied, Gold Plated, Mirror-like Polished, and shall match The Institute of Heraldry (TIOH) Metal

3、 Finish Chip Number 6. DIMENSIONS: HEIGHT: 9/64 inch (REF) WIDTH: 21/32 inch (REF) THICKNESS (at edge): 0.056 0.005 inch Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/309A Page 2 of 2 NOTES: 1. The term (REF) refers to the measurement

4、s taken from the Government furnished hub or die. 2. Attaching device shall be prong with pick and wing type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. 3. Enameled/epoxied areas shall be as shown. When hard enamel is used, the material requirem

5、ent shall be gilding metal. When epoxy is used, the material requirement shall be gilding metal or red brass. Colors shall conform to TIOH Hard Enamel Color Chip numbers listed below: COLOR CHIP NUMBER SilverGray 27 Dark Blue 20 Yellow 31 Bluebird 33 CHANGES FROM PREVIOUS ISSUE: Marginal notations a

6、re not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH (Project No. 8455-2009-089) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-